From: Daniel Golle Date: Thu, 18 Jan 2024 22:12:08 +0000 (+0000) Subject: uboot-mediatek: bpi-r3: all-UBI NAND layout, use fitblk X-Git-Url: http://git.openwrt.org/project/static/git-favicon.png?a=commitdiff_plain;h=033db3a95d602fed24013d7374cb7d9657a337cf;p=openwrt%2Fstaging%2Fwigyori.git uboot-mediatek: bpi-r3: all-UBI NAND layout, use fitblk Modernize U-Boot to provide a better reference: * store fip image in UBI now that TF-A supports that * switch from uImage.FIT partition parser to new fitblk virtual firmware block driver (root=/dev/fit0) * automatically set root device according to boot_mode register Signed-off-by: Daniel Golle --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index 2a4d5481b8..1458ff01ee 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -397,10 +397,10 @@ define U-Boot/mt7986_bananapi_bpi-r3-snand BUILD_DEVICES:=bananapi_bpi-r3 UBOOT_CONFIG:=mt7986a_bpi-r3-snand UBOOT_IMAGE:=u-boot.fip - BL2_BOOTDEV:=spim-nand + BL2_BOOTDEV:=spim-nand-ubi BL2_SOC:=mt7986 BL2_DDRTYPE:=ddr4 - DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ubi-ddr4 endef define U-Boot/mt7986_bananapi_bpi-r3-nor diff --git a/package/boot/uboot-mediatek/patches/311-mt7986-select-roodisk.patch b/package/boot/uboot-mediatek/patches/311-mt7986-select-roodisk.patch new file mode 100644 index 0000000000..3312162765 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/311-mt7986-select-roodisk.patch @@ -0,0 +1,67 @@ +--- a/board/mediatek/mt7986/mt7986_rfb.c ++++ b/board/mediatek/mt7986/mt7986_rfb.c +@@ -11,7 +11,9 @@ + #include + #include + #include ++#include + #include ++#include + + #ifndef CONFIG_RESET_BUTTON_LABEL + #define CONFIG_RESET_BUTTON_LABEL "reset" +@@ -83,3 +85,54 @@ int board_nmbm_init(void) + + return 0; + } ++ ++#define MT7986_BOOT_NOR 0 ++#define MT7986_BOOT_SPIM_NAND 1 ++#define MT7986_BOOT_EMMC 2 ++#define MT7986_BOOT_SNFI_NAND 3 ++ ++int ft_system_setup(void *blob, struct bd_info *bd) ++{ ++ const u32 *media_handle_p; ++ int chosen, len, ret; ++ const char *media; ++ u32 media_handle; ++ ++ switch ((readl(0x1001f6f0) & 0x300) >> 8) { ++ case MT7986_BOOT_NOR: ++ media = "rootdisk-nor"; ++ break ++ ;; ++ case MT7986_BOOT_SPIM_NAND: ++ media = "rootdisk-spim-nand"; ++ break ++ ;; ++ case MT7986_BOOT_EMMC: ++ media = "rootdisk-emmc"; ++ break ++ ;; ++ case MT7986_BOOT_SNFI_NAND: ++ media = "rootdisk-sd"; ++ break ++ ;; ++ } ++ ++ chosen = fdt_path_offset(blob, "/chosen"); ++ if (chosen <= 0) ++ return 0; ++ ++ media_handle_p = fdt_getprop(blob, chosen, media, &len); ++ if (media_handle_p <= 0 || len != 4) ++ return 0; ++ ++ media_handle = *media_handle_p; ++ ret = fdt_setprop(blob, chosen, "rootdisk", &media_handle, sizeof(media_handle)); ++ if (ret) { ++ printf("cannot set media phandle %s as rootdisk /chosen node\n", media); ++ return ret; ++ } ++ ++ printf("set /chosen/rootdisk to bootrom media: %s (phandle 0x%08x)\n", media, fdt32_to_cpu(media_handle)); ++ ++ return 0; ++} diff --git a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch index 1567ba537c..398621537a 100644 --- a/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch +++ b/package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/configs/mt7986a_bpi-r3-emmc_defconfig -@@ -0,0 +1,196 @@ +@@ -0,0 +1,197 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y @@ -13,6 +13,7 @@ +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_emmc_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y @@ -199,7 +200,7 @@ +CONFIG_SERVERIP="192.168.1.254" --- /dev/null +++ b/configs/mt7986a_bpi-r3-nor_defconfig -@@ -0,0 +1,195 @@ +@@ -0,0 +1,193 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y @@ -212,6 +213,7 @@ +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_nor_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y @@ -271,9 +273,6 @@ +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y -+CONFIG_CMD_UBI=y -+CONFIG_CMD_UBI_RENAME=y -+CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y @@ -397,7 +396,7 @@ +CONFIG_SERVERIP="192.168.1.254" --- /dev/null +++ b/configs/mt7986a_bpi-r3-sd_defconfig -@@ -0,0 +1,196 @@ +@@ -0,0 +1,197 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y @@ -410,6 +409,7 @@ +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_sdmmc_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-sd.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y @@ -596,7 +596,7 @@ +CONFIG_SERVERIP="192.168.1.254" --- /dev/null +++ b/configs/mt7986a_bpi-r3-snand_defconfig -@@ -0,0 +1,197 @@ +@@ -0,0 +1,198 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y @@ -609,6 +609,7 @@ +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_snand_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_OF_SYSTEM_SETUP=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y @@ -796,12 +797,12 @@ +CONFIG_SERVERIP="192.168.1.254" --- /dev/null +++ b/bananapi_bpi-r3_sdmmc_env -@@ -0,0 +1,80 @@ +@@ -0,0 +1,81 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 -+bootargs=root=/dev/mmcblk0p65 ++bootargs=root=/dev/fit0 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi +bootconf=config-mt7986a-bananapi-bpi-r3 +bootconf_base=config-mt7986a-bananapi-bpi-r3 @@ -853,26 +854,27 @@ +sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000 +sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol -+mtd_write_fip=mtd erase fip && mtd write fip $loadaddr -+mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++snand_write_bl2=mtd erase bl2 0x0 0x100000 && mtd write bl2 $loadaddr 0x0 0x40000 && mtd write bl2 $loadaddr 0x40000 0x40000 && mtd write bl2 $loadaddr 0x80000 0x40000 && mtd write bl2 $loadaddr 0xc0000 0x40000 ++nor_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++nor_write_fip=mtd erase fip && mtd write fip $loadaddr +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 +nor_erase_env=mtd erase u-boot-env +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb +nor_init=run nor_init_bl && run nor_init_openwrt -+nor_init_bl=run sdmmc_read_nor_bl2 && run mtd_write_bl2 && run sdmmc_read_nor_fip && run mtd_write_fip && run nor_erase_env ++nor_init_bl=run sdmmc_read_nor_bl2 && run nor_write_bl2 && run sdmmc_read_nor_fip && run nor_write_fip && run nor_erase_env +nor_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run nor_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run nor_write_production -+ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi -+ubi_init=run ubi_init_bl && run ubi_format && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install ++ubi_init=run ubi_format && run ubi_init_bl && run ubi_init_openwrt && run ubi_init_emmc_install +ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production -+ubi_init_bl=run sdmmc_read_snand_bl2 && run mtd_write_bl2 && run sdmmc_read_snand_fip && run mtd_write_fip ++ubi_init_bl=run sdmmc_read_snand_bl2 && run snand_write_bl2 && run sdmmc_read_snand_fip && run ubi_write_fip +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_fip=ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000 +ubi_write_emmc_install=ubi check emmc_install && ubi remove emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000 -+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize -+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title @@ -884,7 +886,7 @@ +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 -+bootargs=root=/dev/mtdblock0p1 ++bootargs=root=/dev/fit0 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi +bootconf=config-mt7986a-bananapi-bpi-r3 +bootconf_base=config-mt7986a-bananapi-bpi-r3 @@ -911,7 +913,7 @@ +bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to flash.=run boot_tftp_write_fip ; run bootmenu_confirm_return -+bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_preloader ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return +bootmenu_8=Reboot.=reset +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu @@ -924,13 +926,13 @@ +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf -+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip -+boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run nor_write_fip ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run nor_write_bl2 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_sd ; fi +boot_nor=run boot_production ; run boot_recovery -+boot_write_fip=mtd erase fip && mtd write fip $loadaddr -+boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr +reset_factory=mtd erase u-boot-env ++nor_write_fip=mtd erase fip && mtd write fip $loadaddr ++nor_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr +nor_read_production=mtd read fit $loadaddr 0x0 0x20000 && imsz $loadaddr image_size && mtd read fit $loadaddr 0x0 $image_size +nor_read_recovery=mtd read recovery $loadaddr 0x0 0x20000 && imsz $loadaddr image_size && mtd read recovery $loadaddr 0x0 $image_size +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 @@ -942,12 +944,12 @@ +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" --- /dev/null +++ b/bananapi_bpi-r3_snand_env -@@ -0,0 +1,74 @@ +@@ -0,0 +1,73 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 -+bootargs=root=/dev/ubiblock0_2p1 ++bootargs=root=/dev/fit0 +bootconf=config-mt7986a-bananapi-bpi-r3 +bootconf_base=config-mt7986a-bananapi-bpi-r3 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor @@ -982,28 +984,27 @@ +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=run boot_update_conf ; led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off -+boot_ubi=run boot_update_conf ; run boot_production ; run boot_recovery ++boot_ubi=run boot_production ; run boot_recovery +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf -+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory -+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 -+boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_sd ; fi ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2 ++boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_sd ; fi +part_default=production +part_recovery=recovery -+reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 -+mtd_write_fip=mtd erase fip && mtd write fip $loadaddr -+mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr -+ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 -+ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++reset_factory=ubi part ubi ; mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ++snand_write_bl2=mtd erase bl2 0x0 0x100000 && mtd write bl2 $loadaddr 0x0 0x40000 && mtd write bl2 $loadaddr 0x40000 0x40000 && mtd write bl2 $loadaddr 0x80000 0x40000 && mtd write bl2 $loadaddr 0xc0000 0x40000 ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery +ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data -+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize -+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize ++ubi_write_fip=ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000 ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size +emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv +emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr @@ -1024,7 +1025,7 @@ +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 -+bootargs=root=/dev/mmcblk0p65 ++bootargs=root=/dev/fit0 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi +bootconf=config-mt7986a-bananapi-bpi-r3 +bootconf_base=config-mt7986a-bananapi-bpi-r3 @@ -1058,7 +1059,7 @@ +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=run boot_update_conf ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off -+boot_emmc=run boot_update_conf ; run boot_production ; run boot_recovery ++boot_emmc=run boot_production ; run boot_recovery +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi @@ -1081,3 +1082,32 @@ +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- a/arch/arm/dts/mt7986a-bpi-r3-sd.dts ++++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts +@@ -235,22 +235,13 @@ + + partition@0 { + label = "bl2"; +- reg = <0x0 0x80000>; ++ reg = <0x0 0x200000>; + }; + +- partition@80000 { +- label = "factory"; +- reg = <0x80000 0x300000>; +- }; +- +- partition@380000 { +- label = "fip"; +- reg = <0x380000 0x200000>; +- }; +- +- partition@580000 { ++ partition@200000 { + label = "ubi"; +- reg = <0x580000 0x7a80000>; ++ reg = <0x200000 0x7e00000>; ++ compatible = "linux,ubi"; + }; + }; + };