Config.in

   1 # Copyright (C) 2006-2012 OpenWrt.org
   2 #
   3 # This is free software, licensed under the GNU General Public License v2.
   4 # See /LICENSE for more information.
   5 #
   6
   7 mainmenu "OpenWrt Configuration"
   8
   9 config MODULES
  10         bool
  11         default y
  12
  13 config HAVE_DOT_CONFIG
  14         bool
  15         default y
  16
  17 source "target/Config.in"
  18
  19 menu "Target Images"
  20
  21         menuconfig TARGET_ROOTFS_INITRAMFS
  22                 bool "ramdisk"
  23                 default y if USES_INITRAMFS
  24                 help
  25                   Embed the rootfs into the kernel (initramfs)
  26
  27                 choice
  28                         prompt "Compression"
  29                         default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
  30                         default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
  31                         default TARGET_INITRAMFS_COMPRESSION_NONE
  32                         depends on TARGET_ROOTFS_INITRAMFS
  33                         help
  34                           Select ramdisk compression.
  35
  36                         config TARGET_INITRAMFS_COMPRESSION_NONE
  37                                 bool "none"
  38
  39                         config TARGET_INITRAMFS_COMPRESSION_GZIP
  40                                 bool "gzip"
  41
  42                         config TARGET_INITRAMFS_COMPRESSION_BZIP2
  43                                 bool "bzip2"
  44
  45                         config TARGET_INITRAMFS_COMPRESSION_LZMA
  46                                 bool "lzma"
  47
  48                         config TARGET_INITRAMFS_COMPRESSION_LZO
  49                                 bool "lzo"
  50
  51                         config TARGET_INITRAMFS_COMPRESSION_XZ
  52                                 bool "xz"
  53                 endchoice
  54
  55                 config EXTERNAL_CPIO
  56                         string
  57                         prompt "Use external cpio" if TARGET_ROOTFS_INITRAMFS
  58                         default ""
  59                         help
  60                           Kernel uses specified external cpio as INITRAMFS_SOURCE
  61
  62         comment "Root filesystem archives"
  63
  64         config TARGET_ROOTFS_CPIOGZ
  65                 bool "cpio.gz"
  66                 default y if USES_CPIOGZ
  67                 help
  68                   Build a compressed cpio archive of the the root filesystem
  69
  70         config TARGET_ROOTFS_TARGZ
  71                 bool "tar.gz"
  72                 default y if USES_TARGZ
  73                 help
  74                   Build a compressed tar archive of the the root filesystem
  75
  76         comment "Root filesystem images"
  77
  78         config TARGET_ROOTFS_EXT4FS
  79                 bool "ext4"
  80                 default y if USES_EXT4
  81                 depends on !TARGET_ROOTFS_INITRAMFS
  82                 help
  83                   Ext4 file system with some free space for uml images
  84
  85         config TARGET_ROOTFS_ISO
  86                 bool "iso"
  87                 default n
  88                 depends on TARGET_x86_generic
  89                 depends on !TARGET_ROOTFS_INITRAMFS
  90                 help
  91                   Create some bootable ISO image
  92
  93         config TARGET_ROOTFS_JFFS2
  94                 bool "jffs2"
  95                 default y if USES_JFFS2
  96                 depends on !TARGET_ROOTFS_INITRAMFS
  97                 help
  98                   Build a jffs2 root filesystem
  99
 100         config TARGET_ROOTFS_SQUASHFS
 101                 bool "squashfs"
 102                 default y if USES_SQUASHFS
 103                 depends on !TARGET_ROOTFS_INITRAMFS
 104                 help
 105                   Build a squashfs-lzma root filesystem
 106
 107         config TARGET_ROOTFS_UBIFS
 108                 bool "ubifs"
 109                 default y if USES_UBIFS
 110                 depends on !TARGET_ROOTFS_INITRAMFS && USES_UBIFS
 111                 help
 112                   Build a ubifs root filesystem
 113
 114         comment "Image Options"
 115
 116         source "target/linux/*/image/Config.in"
 117
 118         config TARGET_ROOTFS_PARTSIZE
 119                 int "Root filesystem partition size (in MB)"
 120                 depends on X86_GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532
 121                 default 48
 122                 help
 123                     Allows you to change the root filesystem partition size
 124
 125         config TARGET_ROOTFS_MAXINODE
 126                 int "Maximum number of inodes in root filesystem"
 127                 depends on TARGET_ROOTFS_EXT4FS
 128                 default 6000
 129                 help
 130                     Allows you to change the maximum number of inodes in the root filesystem
 131
 132         config TARGET_ROOTFS_RESERVED_PCT
 133                 int "Percentage of reserved blocks in root filesystem"
 134                 depends on TARGET_ROOTFS_EXT4FS
 135                 default 0
 136                 help
 137                     Allows you to change the percentage of reserved blocks in the root filesystem
 138
 139 endmenu
 140
 141 menu "Global build settings"
 142
 143         config ALL
 144                 bool "Select all packages by default"
 145                 default n
 146
 147         comment "General build options"
 148
 149         config DISPLAY_SUPPORT
 150                 bool "Show packages that require graphics support (local or remote)"
 151                 default n
 152
 153         config BUILD_PATENTED
 154                 default y
 155                 bool "Compile with support for patented functionality"
 156                 help
 157                   When this option is disabled, software which provides patented functionality will not be built.
 158                   In case software provides optional support for patented functionality,
 159                   this optional support will get disabled for this package.
 160
 161         config BUILD_NLS
 162                 default n
 163                 bool "Compile with full language support"
 164                 help
 165                   When this option is enabled, packages are built with the full versions of iconv and GNU gettext
 166                   instead of the default OpenWrt stubs. If uClibc is used, it is also built with locale support.
 167
 168         config BUILD_STATIC_TOOLS
 169                 default n
 170                 bool "Attempt to link host utilities statically"
 171                 help
 172                   Linking host utilities like sed or firmware-utils statically increases the portability of the
 173                   generated ImageBuilder and SDK tarballs, however it may fail on some Linux distributions.
 174
 175         config SHADOW_PASSWORDS
 176                 bool
 177                 prompt "Enable shadow password support"
 178                 default y
 179                 help
 180                   Enable shadow password support.
 181
 182         config CLEAN_IPKG
 183                 bool
 184                 prompt "Remove ipkg/opkg status data files in final images"
 185                 default n
 186                 help
 187                         This removes all ipkg/opkg status data files from the target directory before building the root fs
 188
 189         config COLLECT_KERNEL_DEBUG
 190                 bool
 191                 prompt "Collect kernel debug information"
 192                 select KERNEL_DEBUG_INFO
 193                 default n
 194                 help
 195                         This collects debugging symbols from the kernel and all compiled modules.
 196                         Useful for release builds, so that kernel issues can be debugged offline later.
 197
 198         comment "Kernel build options"
 199
 200         config KERNEL_DEBUG_FS
 201                 bool "Compile the kernel with Debug FileSystem enabled"
 202                 default y
 203                 help
 204                   debugfs is a virtual file system that kernel developers use to put
 205                   debugging files into. Enable this option to be able to read and
 206                   write to these files.
 207
 208         config KERNEL_PERF_EVENTS
 209                 bool
 210                 default n
 211
 212         config KERNEL_PROFILING
 213                 bool "Compile the kernel with profiling enabled"
 214                 default n
 215                 select KERNEL_PERF_EVENTS
 216                 help
 217                   Enable the extended profiling support mechanisms used by profilers such
 218                   as OProfile.
 219
 220         config KERNEL_KALLSYMS
 221                 bool "Compile the kernel with symbol table information"
 222                 default y
 223                 help
 224                   This will give you more information in stack traces from kernel oopses
 225
 226         config KERNEL_FTRACE
 227                 bool "Compile the kernel with tracing support"
 228                 default n
 229
 230         config KERNEL_ENABLE_DEFAULT_TRACERS
 231                 bool "Trace process context switches and events"
 232                 depends on KERNEL_FTRACE
 233                 default n
 234
 235         config KERNEL_DEBUG_KERNEL
 236                 bool
 237                 default n
 238
 239         config KERNEL_DEBUG_INFO
 240                 bool "Compile the kernel with debug information"
 241                 default y
 242                 select KERNEL_DEBUG_KERNEL
 243                 help
 244                   This will compile your kernel and modules with debug information.
 245
 246         config KERNEL_DEBUG_LL_UART_NONE
 247                 bool
 248                 default n
 249                 depends on arm
 250
 251         config KERNEL_DEBUG_LL
 252                 bool
 253                 default n
 254                 depends on arm
 255                 select KERNEL_DEBUG_LL_UART_NONE
 256                 help
 257                   ARM low level debugging
 258
 259         config KERNEL_EARLY_PRINTK
 260                 bool "Compile the kernel with early printk"
 261                 default n
 262                 depends on arm
 263                 select KERNEL_DEBUG_KERNEL
 264                 select KERNEL_DEBUG_LL if arm
 265                 help
 266                   Compile the kernel with early printk support.
 267                   This is only useful for debugging purposes to send messages
 268                   over the serial console in early boot.
 269                   Enable this to debug early boot problems.
 270
 271         config KERNEL_AIO
 272                 bool "Compile the kernel with asynchronous IO support"
 273                 default n
 274
 275         config KERNEL_DIRECT_IO
 276                 bool "Compile the kernel with direct IO support"
 277                 default n
 278
 279         config KERNEL_MAGIC_SYSRQ
 280                 bool "Compile the kernel with SysRq support"
 281                 default y
 282
 283         config KERNEL_COREDUMP
 284                 bool
 285
 286         config KERNEL_ELF_CORE
 287                 bool "Enable process core dump support"
 288                 select KERNEL_COREDUMP
 289                 default y
 290
 291         config KERNEL_PROVE_LOCKING
 292                 bool "Enable kernel lock checking"
 293                 select KERNEL_DEBUG_KERNEL
 294                 default n
 295
 296         config KERNEL_PRINTK_TIME
 297                 bool "Enable printk timestamps"
 298                 default y
 299
 300         config KERNEL_RELAY
 301                 bool
 302
 303         #
 304         # CGROUP support symbols
 305         #
 306
 307         config KERNEL_FREEZER
 308                 bool
 309                 default y if KERNEL_CGROUP_FREEZER
 310                 depends on KERNEL_CGROUPS
 311
 312         config KERNEL_CGROUP_FREEZER
 313                 bool
 314                 depends on KERNEL_CGROUPS
 315
 316         config KERNEL_CGROUP_DEVICE
 317                 bool
 318                 depends on KERNEL_CGROUPS
 319
 320         config KERNEL_CPUSETS
 321                 bool
 322                 default y if KERNEL_CGROUP_CPUACCT
 323                 depends on KERNEL_CGROUPS
 324
 325         config KERNEL_PROC_PID_CPUSET
 326                 bool
 327                 default y if KERNEL_CGROUP_CPUACCT
 328                 depends on KERNEL_CGROUPS
 329
 330         config KERNEL_CGROUP_CPUACCT
 331                 bool
 332                 depends on KERNEL_CGROUPS
 333
 334         config KERNEL_RESOURCE_COUNTERS
 335                 bool
 336                 default y if KERNEL_CGROUP_MEM_RES_CTLR
 337                 depends on KERNEL_CGROUPS
 338
 339         config KERNEL_CGROUP_MEM_RES_CTLR
 340                 bool
 341                 depends on KERNEL_CGROUPS
 342
 343         config KERNEL_CGROUP_MEM_RES_CTLR_SWAP
 344                 bool
 345                 depends on KERNEL_CGROUPS
 346
 347         config KERNEL_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
 348                 bool
 349                 depends on KERNEL_CGROUPS
 350
 351         config KERNEL_CGROUP_MEM_RES_CTLR_KMEM
 352                 bool
 353                 depends on KERNEL_CGROUPS
 354
 355         config KERNEL_CGROUP_PERF
 356                 bool
 357                 depends on KERNEL_CGROUPS
 358
 359         config KERNEL_CFS_BANDWIDTH
 360                 bool
 361                 default y if KERNEL_FAIR_GROUP_SCHED
 362                 depends on KERNEL_CGROUP_SCHED
 363
 364         config KERNEL_FAIR_GROUP_SCHED
 365                 bool
 366                 default y if KERNEL_CGROUP_SCHED
 367                 depends on KERNEL_CGROUP_SCHED
 368
 369         config KERNEL_RT_GROUP_SCHED
 370                 bool
 371                 default y if KERNEL_CGROUP_SCHED
 372                 depends on KERNEL_CGROUP_SCHED
 373
 374         config KERNEL_CGROUP_SCHED
 375                 bool
 376                 depends on KERNEL_CGROUPS
 377
 378         config KERNEL_NET_CLS_CGROUP
 379                 bool
 380                 depends on KERNEL_CGROUPS
 381
 382         config KERNEL_NETPRIO_CGROUP
 383                 bool
 384                 depends on KERNEL_CGROUPS
 385
 386         config KERNEL_BLK_CGROUP
 387                 bool
 388                 depends on KERNEL_CGROUPS
 389
 390         config KERNEL_DEBUG_BLK_CGROUP
 391                 bool
 392                 default n if KERNEL_CGROUPS
 393                 depends on KERNEL_CGROUPS
 394
 395         config KERNEL_CGROUPS
 396                 bool "Enable kernel cgroups"
 397                 default n
 398                 select KERNEL_CGROUP_FREEZER
 399                 select KERNEL_CGROUP_DEVICE
 400                 select KERNEL_CGROUP_CPUACCT
 401                 select KERNEL_CGROUP_MEM_RES_CTLR
 402                 select KERNEL_CGROUP_MEM_RES_CTLR_SWAP
 403                 select KERNEL_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
 404                 select KERNEL_CGROUP_MEM_RES_CTLR_KMEM
 405                 select KERNEL_CGROUP_PERF
 406                 select KERNEL_CGROUP_SCHED
 407                 select KERNEL_NET_CLS_CGROUP
 408                 select KERNEL_NETPRIO_CGROUP
 409                 select KERNEL_BLK_CGROUP
 410
 411         #
 412         # Namespace support symbols
 413         #
 414
 415         config KERNEL_UTS_NS
 416                 bool
 417                 depends on KERNEL_NAMESPACES
 418
 419         config KERNEL_IPC_NS
 420                 bool
 421                 depends on KERNEL_NAMESPACES
 422
 423         config KERNEL_USER_NS
 424                 bool
 425                 depends on KERNEL_NAMESPACES
 426
 427         config KERNEL_PID_NS
 428                 bool
 429                 depends on KERNEL_NAMESPACES
 430
 431         config KERNEL_NET_NS
 432                 bool
 433                 depends on KERNEL_NAMESPACES
 434
 435         config KERNEL_DEVPTS_MULTIPLE_INSTANCES
 436                 bool
 437                 depends on KERNEL_NAMESPACES
 438
 439         config KERNEL_NAMESPACES
 440                 bool "Enable kernel namespaces"
 441                 default n
 442                 select KERNEL_UTS_NS
 443                 select KERNEL_IPC_NS
 444                 select KERNEL_USER_NS
 445                 select KERNEL_PID_NS
 446                 select KERNEL_NET_NS
 447                 select KERNEL_DEVPTS_MULTIPLE_INSTANCES
 448
 449
 450         comment "Package build options"
 451
 452         config DEBUG
 453                 bool
 454                 prompt "Compile packages with debugging info"
 455                 default n
 456                 help
 457                   Adds -g3 to the CFLAGS
 458
 459         config IPV6
 460                 bool
 461                 prompt "Enable IPv6 support in packages"
 462                 default y
 463                 help
 464                   Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts).
 465
 466         config PKG_BUILD_PARALLEL
 467                 bool
 468                 prompt "Compile certain packages parallelized"
 469                 default y
 470                 help
 471                   This adds a -jX option to certain packages that are known to
 472                   behave well for parallel build. By default the package make processes
 473                   use the main jobserver, in which case this option only takes effect
 474                   when you add -jX to the make command.
 475
 476                   If you are unsure, select N.
 477
 478         config PKG_BUILD_USE_JOBSERVER
 479                 bool
 480                 prompt "Use top-level make jobserver for packages"
 481                 depends on PKG_BUILD_PARALLEL
 482                 default y
 483                 help
 484                   This passes the main make process jobserver fds to package builds,
 485                   enabling full parallelization across different packages
 486
 487                   Note that disabling this may overcommit CPU resources depending on the
 488                   -j level of the main make process, the number of package
 489                   submake jobs selected below and the number of actual CPUs present.
 490                   Example: If the main make is passed a -j4 and the submake -j
 491                   is also set to 4, we may end up with 16 parallel make processes
 492                   in the worst case.
 493
 494
 495         config PKG_BUILD_JOBS
 496                 int
 497                 prompt "Number of package submake jobs (2-512)"
 498                 range 2 512
 499                 default 2
 500                 depends on PKG_BUILD_PARALLEL && !PKG_BUILD_USE_JOBSERVER
 501                 help
 502                   The number of jobs (-jX) to pass to packages submake.
 503
 504         config PKG_DEFAULT_PARALLEL
 505                 bool
 506                 prompt "Parallelize the default package build rule (May break build)"
 507                 depends on PKG_BUILD_PARALLEL
 508                 depends on BROKEN
 509                 default n
 510                 help
 511                   Always set the default package build rules to parallel build.
 512
 513                   WARNING: This may break build or kill your cat, as it builds
 514                   packages with multiple jobs that are probably not tested in
 515                   a parallel build environment.
 516
 517                   Only say Y, if you don't mind fixing broken packages.
 518                   Before reporting build bugs, set this to N and re-run the build.
 519
 520         comment "Stripping options"
 521
 522         choice
 523                 prompt "Binary stripping method"
 524                 default USE_STRIP   if EXTERNAL_TOOLCHAIN
 525                 default USE_STRIP   if USE_GLIBC || USE_EGLIBC || USE_MUSL
 526                 default USE_SSTRIP
 527                 help
 528                   Select the binary stripping method you wish to use.
 529
 530                 config NO_STRIP
 531                         bool "none"
 532                         help
 533                           This will install unstripped binaries (useful for native compiling/debugging)
 534
 535                 config USE_STRIP
 536                         bool "strip"
 537                         help
 538                           This will install binaries stripped using strip from binutils
 539
 540
 541                 config USE_SSTRIP
 542                         bool "sstrip"
 543                         depends on !DEBUG
 544                         depends on !USE_GLIBC
 545                         depends on !USE_EGLIBC
 546                         help
 547                           This will install binaries stripped using sstrip
 548         endchoice
 549
 550         config STRIP_ARGS
 551                 string
 552                 prompt "Strip arguments"
 553                 depends on USE_STRIP
 554                 default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG
 555                 default "--strip-all"
 556                 help
 557                   Specifies arguments passed to the strip command when stripping binaries
 558
 559         config STRIP_KERNEL_EXPORTS
 560                 bool "Strip unnecessary exports from the kernel image"
 561                 help
 562                   Reduces kernel size by stripping unused kernel exports from the kernel image
 563                   Note that this might make the kernel incompatible with any kernel modules that
 564                   were not selected at the time the kernel image was created
 565
 566         config USE_MKLIBS
 567                 bool "Strip unnecessary functions from libraries"
 568                 help
 569                   Reduces libraries to only those functions that are necessary for using all
 570                   selected packages (including those selected as <M>)
 571                   Note that this will make the system libraries incompatible with most of the packages
 572                   that are not selected during the build process
 573
 574         if INSTALL_LIBSTDCPP
 575                 choice
 576                         prompt "Preferred standard C++ library"
 577                         default USE_LIBSTDCXX if USE_EGLIBC
 578                         default USE_UCLIBCXX
 579                         help
 580                           Select the preferred standard C++ library for all packages that support this.
 581
 582                         config USE_UCLIBCXX
 583                                 bool "uClibc++"
 584
 585                         config USE_LIBSTDCXX
 586                                 bool "libstdc++"
 587                 endchoice
 588         endif
 589
 590 endmenu
 591
 592 menuconfig DEVEL
 593         bool "Advanced configuration options (for developers)"
 594         default n
 595
 596         config BROKEN
 597                 bool "Show broken platforms / packages" if DEVEL
 598                 default n
 599
 600         config DOWNLOAD_FOLDER
 601                 string "Download folder" if DEVEL
 602                 default ""
 603
 604         config LOCALMIRROR
 605                 string "Local mirror for source packages" if DEVEL
 606                 default ""
 607
 608         config AUTOREBUILD
 609                 bool "Automatic rebuild of packages" if DEVEL
 610                 default y
 611                 help
 612                   Automatically rebuild packages when their files change
 613
 614         config BUILD_SUFFIX
 615                 string "Build suffix to append to the BUILD_DIR variable" if DEVEL
 616                 default ""
 617                 help
 618                   Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix
 619
 620         config TARGET_ROOTFS_DIR
 621                 string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL
 622                 default ""
 623                 help
 624                   Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path.
 625                   Use this option to re-define the location of the target root file system directory.
 626
 627         config CCACHE
 628                 bool "Use ccache" if DEVEL
 629                 default n
 630                 help
 631                   Compiler cache; see http://ccache.samba.org/
 632
 633         config EXTERNAL_KERNEL_TREE
 634                 string "Use external kernel tree" if DEVEL
 635                 default ""
 636
 637         config KERNEL_GIT_CLONE_URI
 638                 string "Enter git repository to clone" if DEVEL
 639                 default ""
 640                 help
 641                   Enter the full git repository path i.e.:
 642                   git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 643                   This will create a git clone of the kernel in your build
 644                   directory.
 645
 646         config KERNEL_GIT_LOCAL_REPOSITORY
 647                 string "Enter path to local reference repository" if DEVEL
 648                 default ""
 649                 help
 650                   Enter a full pathname to a local reference git repository.
 651                   In this instance, the --refererence option of git clone will
 652                   be used thus creating a quick local clone of your repo.
 653
 654         config BUILD_LOG
 655                 bool "Enable log files during build process" if DEVEL
 656                 help
 657                   If enabled log files will be written to the ./log directory
 658
 659         config SRC_TREE_OVERRIDE
 660                 bool "Enable package source tree override" if DEVEL
 661                 help
 662                   If enabled, you can force a package to use a git tree as source
 663                   code instead of the normal tarball. Create a symlink 'git-src'
 664                   in the package directory, pointing to the .git tree that you want
 665                   to pull the source code from
 666
 667 menuconfig TARGET_OPTIONS
 668         bool "Target Options"  if DEVEL
 669
 670         config TARGET_OPTIMIZATION
 671                 string "Target Optimizations" if TARGET_OPTIONS
 672                 default DEFAULT_TARGET_OPTIMIZATION
 673                 help
 674                   Optimizations to use when building for the target host.
 675
 676         config SOFT_FLOAT
 677                 bool "Use software floating point by default" if TARGET_OPTIONS
 678                 default y
 679                 depends on (arm || armeb || powerpc || mipsel || mips || mips64el || mips64) && !HAS_FPU
 680                 help
 681                   If your target CPU does not have a Floating Point Unit (FPU) or a
 682                   kernel FPU emulator, but you still wish to support floating point
 683                   functions, then everything will need to be compiled with soft floating
 684                   point support (-msoft-float).
 685
 686                   Most people will answer N.
 687
 688         config USE_MIPS16
 689                 bool "Build packages with MIPS16 instructions" if TARGET_OPTIONS
 690                 depends on HAS_MIPS16
 691                 help
 692                    If your target CPU does support the MIPS16 instruction set
 693                    and you want to use it for packages, enable this option.
 694                    MIPS16 produces smaller binaries thus reducing pressure on
 695                    caches and TLB.
 696
 697                    Most people will answer N.
 698
 699 source "toolchain/Config.in"
 700
 701 source "target/imagebuilder/Config.in"
 702 source "target/sdk/Config.in"
 703 source "target/toolchain/Config.in"
 704
 705 source "tmp/.config-package.in"