package/busybox/config/networking/Config.in

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see scripts/kbuild/config-language.txt.
   4 #
   5
   6 menu "Networking Utilities"
   7
   8 config BUSYBOX_CONFIG_FEATURE_IPV6
   9         bool "Enable IPv6 support"
  10         default y
  11         help
  12           Enable IPv6 support in busybox.
  13           This adds IPv6 support in the networking applets.
  14
  15 config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
  16         bool "Prefer IPv4 addresses from DNS queries"
  17         default y
  18         depends on BUSYBOX_CONFIG_FEATURE_IPV6
  19         help
  20           Use IPv4 address of network host if it has one.
  21
  22           If this option is off, the first returned address will be used.
  23           This may cause problems when your DNS server is IPv6-capable and
  24           is returning IPv6 host addresses too. If IPv6 address
  25           precedes IPv4 one in DNS reply, busybox network applets
  26           (e.g. wget) will use IPv6 address. On an IPv6-incapable host
  27           or network applets will fail to connect to the host
  28           using IPv6 address.
  29
  30 config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
  31         bool "Verbose resolution errors"
  32         default y
  33         help
  34           Enable if you are not satisfied with simplistic
  35           "can't resolve 'hostname.com'" and want to know more.
  36           This may increase size of your executable a bit.
  37
  38 config BUSYBOX_CONFIG_ARP
  39         bool "arp"
  40         default n
  41         help
  42           Manipulate the system ARP cache.
  43
  44 config BUSYBOX_CONFIG_ARPING
  45         bool "arping"
  46         default y
  47         help
  48           Ping hosts by ARP packets.
  49
  50 config BUSYBOX_CONFIG_BRCTL
  51         bool "brctl"
  52         default y
  53         help
  54           Manage ethernet bridges.
  55           Supports addbr/delbr and addif/delif.
  56
  57 config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
  58         bool "Fancy options"
  59         default y
  60         depends on BUSYBOX_CONFIG_BRCTL
  61         help
  62           Add support for extended option like:
  63             setageing, setfd, sethello, setmaxage,
  64             setpathcost, setportprio, setbridgeprio,
  65             stp
  66           This adds about 600 bytes.
  67
  68 config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
  69         bool "Support show"
  70         default y
  71         depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
  72         help
  73           Add support for option which prints the current config:
  74             show
  75
  76 config BUSYBOX_CONFIG_DNSD
  77         bool "dnsd"
  78         default n
  79         help
  80           Small and static DNS server daemon.
  81
  82 config BUSYBOX_CONFIG_ETHER_WAKE
  83         bool "ether-wake"
  84         default n
  85         help
  86           Send a magic packet to wake up sleeping machines.
  87
  88 config BUSYBOX_CONFIG_FAKEIDENTD
  89         bool "fakeidentd"
  90         default n
  91         select BUSYBOX_CONFIG_FEATURE_SYSLOG
  92         help
  93           fakeidentd listens on the ident port and returns a predefined
  94           fake value on any query.
  95
  96 config BUSYBOX_CONFIG_FTPD
  97         bool "ftpd"
  98         default n
  99         help
 100           simple FTP daemon. You have to run it via inetd.
 101
 102 config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
 103         bool "Enable upload commands"
 104         default n
 105         depends on BUSYBOX_CONFIG_FTPD
 106         help
 107           Enable all kinds of FTP upload commands (-w option)
 108
 109 config BUSYBOX_CONFIG_FTPGET
 110         bool "ftpget"
 111         default n
 112         help
 113           Retrieve a remote file via FTP.
 114
 115 config BUSYBOX_CONFIG_FTPPUT
 116         bool "ftpput"
 117         default n
 118         help
 119           Store a remote file via FTP.
 120
 121 config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
 122         bool "Enable long options in ftpget/ftpput"
 123         default n
 124         depends on BUSYBOX_CONFIG_GETOPT_LONG && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
 125         help
 126           Support long options for the ftpget/ftpput applet.
 127
 128 config BUSYBOX_CONFIG_HOSTNAME
 129         bool "hostname"
 130         default n
 131         help
 132           Show or set the system's host name.
 133
 134 config BUSYBOX_CONFIG_HTTPD
 135         bool "httpd"
 136         default y
 137         help
 138           Serve web pages via an HTTP server.
 139
 140 config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
 141         bool "Support 'Ranges:' header"
 142         default y
 143         depends on BUSYBOX_CONFIG_HTTPD
 144         help
 145           Makes httpd emit "Accept-Ranges: bytes" header and understand
 146           "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
 147           downloads, seeking in multimedia players etc.
 148
 149 config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
 150         bool "Use sendfile system call"
 151         default n
 152         depends on BUSYBOX_CONFIG_HTTPD
 153         help
 154           When enabled, httpd will use the kernel sendfile() function
 155           instead of read/write loop.
 156
 157 config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP
 158         bool "Support reloading of global config file on HUP signal"
 159         default y
 160         depends on BUSYBOX_CONFIG_HTTPD
 161         help
 162           This option enables processing of SIGHUP to reload cached
 163           configuration settings.
 164
 165 config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
 166         bool "Enable -u <user> option"
 167         default n
 168         depends on BUSYBOX_CONFIG_HTTPD
 169         help
 170           This option allows the server to run as a specific user
 171           rather than defaulting to the user that starts the server.
 172           Use of this option requires special privileges to change to a
 173           different user.
 174
 175 config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 176         bool "Enable Basic http Authentication"
 177         default y
 178         depends on BUSYBOX_CONFIG_HTTPD
 179         help
 180           Utilizes password settings from /etc/httpd.conf for basic
 181           authentication on a per url basis.
 182
 183 config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
 184         bool "Support MD5 crypted passwords for http Authentication"
 185         default y
 186         depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
 187         help
 188           Enables basic per URL authentication from /etc/httpd.conf
 189           using md5 passwords.
 190
 191 config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES
 192         bool "Support loading additional MIME types at run-time"
 193         default y
 194         depends on BUSYBOX_CONFIG_HTTPD
 195         help
 196           This option enables support for additional MIME types at
 197           run-time to be specified in the configuration file.
 198
 199 config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 200         bool "Support Common Gateway Interface (CGI)"
 201         default y
 202         depends on BUSYBOX_CONFIG_HTTPD
 203         help
 204           This option allows scripts and executables to be invoked
 205           when specific URLs are requested.
 206
 207 config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
 208         bool "Support for running scripts through an interpreter"
 209         default y
 210         depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 211         help
 212           This option enables support for running scripts through an
 213           interpreter. Turn this on if you want PHP scripts to work
 214           properly. You need to supply an additional line in your httpd
 215           config file:
 216           *.php:/path/to/your/php
 217
 218 config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
 219         bool "Set REMOTE_PORT environment variable for CGI"
 220         default y
 221         depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
 222         help
 223           Use of this option can assist scripts in generating
 224           references that contain a unique port number.
 225
 226 config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
 227         bool "Enable -e option (useful for CGIs written as shell scripts)"
 228         default y
 229         depends on BUSYBOX_CONFIG_HTTPD
 230         help
 231           This option allows html encoding of arbitrary strings for display
 232           by the browser. Output goes to stdout.
 233           For example, httpd -e "<Hello World>" produces
 234           "&#60Hello&#32World&#62".
 235
 236 config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
 237         bool "Support for custom error pages"
 238         default y
 239         depends on BUSYBOX_CONFIG_HTTPD
 240         help
 241           This option allows you to define custom error pages in
 242           the configuration file instead of the default HTTP status
 243           error pages. For instance, if you add the line:
 244                 E404:/path/e404.html
 245           in the config file, the server will respond the specified
 246           '/path/e404.html' file instead of the terse '404 NOT FOUND'
 247           message.
 248
 249 config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
 250         bool "Support for reverse proxy"
 251         default y
 252         depends on BUSYBOX_CONFIG_HTTPD
 253         help
 254           This option allows you to define URLs that will be forwarded
 255           to another HTTP server. To setup add the following line to the
 256           configuration file
 257                 P:/url/:http://hostname[:port]/new/path/
 258           Then a request to /url/myfile will be forwarded to
 259           http://hostname[:port]/new/path/myfile.
 260
 261 config BUSYBOX_CONFIG_IFCONFIG
 262         bool "ifconfig"
 263         default y
 264         help
 265           Ifconfig is used to configure the kernel-resident network interfaces.
 266
 267 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
 268         bool "Enable status reporting output (+7k)"
 269         default y
 270         depends on BUSYBOX_CONFIG_IFCONFIG
 271         help
 272           If ifconfig is called with no arguments it will display the status
 273           of the currently active interfaces.
 274
 275 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
 276         bool "Enable slip-specific options \"keepalive\" and \"outfill\""
 277         default n
 278         depends on BUSYBOX_CONFIG_IFCONFIG
 279         help
 280           Allow "keepalive" and "outfill" support for SLIP. If you're not
 281           planning on using serial lines, leave this unchecked.
 282
 283 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
 284         bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
 285         default n
 286         depends on BUSYBOX_CONFIG_IFCONFIG
 287         help
 288           Allow the start address for shared memory, start address for I/O,
 289           and/or the interrupt line used by the specified device.
 290
 291 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
 292         bool "Enable option \"hw\" (ether only)"
 293         default y
 294         depends on BUSYBOX_CONFIG_IFCONFIG
 295         help
 296           Set the hardware address of this interface, if the device driver
 297           supports  this  operation. Currently, we only support the 'ether'
 298           class.
 299
 300 config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
 301         bool "Set the broadcast automatically"
 302         default y
 303         depends on BUSYBOX_CONFIG_IFCONFIG
 304         help
 305           Setting this will make ifconfig attempt to find the broadcast
 306           automatically if the value '+' is used.
 307
 308 config BUSYBOX_CONFIG_IFENSLAVE
 309         bool "ifenslave"
 310         default n
 311         help
 312           Userspace application to bind several interfaces
 313           to a logical interface (use with kernel bonding driver).
 314
 315 config BUSYBOX_CONFIG_IFUPDOWN
 316         bool "ifupdown"
 317         default n
 318         help
 319           Activate or deactivate the specified interfaces. This applet makes
 320           use of either "ifconfig" and "route" or the "ip" command to actually
 321           configure network interfaces. Therefore, you will probably also want
 322           to enable either IFCONFIG and ROUTE, or enable
 323           FEATURE_IFUPDOWN_IP and the various IP options. Of
 324           course you could use non-busybox versions of these programs, so
 325           against my better judgement (since this will surely result in plenty
 326           of support questions on the mailing list), I do not force you to
 327           enable these additional options. It is up to you to supply either
 328           "ifconfig", "route" and "run-parts" or the "ip" command, either
 329           via busybox or via standalone utilities.
 330
 331 config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
 332         string "Absolute path to ifstate file"
 333         default n
 334         depends on BUSYBOX_CONFIG_IFUPDOWN
 335         help
 336           ifupdown keeps state information in a file called ifstate.
 337           Typically it is located in /var/run/ifstate, however
 338           some distributions tend to put it in other places
 339           (debian, for example, uses /etc/network/run/ifstate).
 340           This config option defines location of ifstate.
 341
 342 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 343         bool "Use ip applet"
 344         default n
 345         depends on BUSYBOX_CONFIG_IFUPDOWN
 346         help
 347           Use the iproute "ip" command to implement "ifup" and "ifdown", rather
 348           than the default of using the older 'ifconfig' and 'route' utilities.
 349
 350 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
 351         bool "Use busybox ip applet"
 352         default n
 353         depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 354         select BUSYBOX_CONFIG_IP
 355         select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
 356         select BUSYBOX_CONFIG_FEATURE_IP_LINK
 357         select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 358         help
 359           Use the busybox iproute "ip" applet to implement "ifupdown".
 360
 361           If left disabled, you must install the full-blown iproute2
 362           utility or the  "ifup" and "ifdown" applets will not work.
 363
 364 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
 365         bool "Use busybox ifconfig and route applets"
 366         default n
 367         depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
 368         select BUSYBOX_CONFIG_IFCONFIG
 369         select BUSYBOX_CONFIG_ROUTE
 370         help
 371           Use the busybox iproute "ifconfig" and "route" applets to
 372           implement the "ifup" and "ifdown" utilities.
 373
 374           If left disabled, you must install the full-blown ifconfig
 375           and route utilities, or the  "ifup" and "ifdown" applets will not
 376           work.
 377
 378 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
 379         bool "Support for IPv4"
 380         default n
 381         depends on BUSYBOX_CONFIG_IFUPDOWN
 382         help
 383           If you want ifup/ifdown to talk IPv4, leave this on.
 384
 385 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
 386         bool "Support for IPv6"
 387         default n
 388         depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
 389         help
 390           If you need support for IPv6, turn this option on.
 391
 392 ### UNUSED
 393 ###config FEATURE_IFUPDOWN_IPX
 394 ###     bool "Support for IPX"
 395 ###     default n
 396 ###     depends on IFUPDOWN
 397 ###     help
 398 ###       If this option is selected you can use busybox to work with IPX
 399 ###       networks.
 400
 401 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
 402         bool "Enable mapping support"
 403         default n
 404         depends on BUSYBOX_CONFIG_IFUPDOWN
 405         help
 406           This enables support for the "mapping" stanza, unless you have
 407           a weird network setup you don't need it.
 408
 409 config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
 410         bool "Support for external dhcp clients"
 411         default n
 412         depends on BUSYBOX_CONFIG_IFUPDOWN
 413         help
 414           This enables support for the external dhcp clients. Clients are
 415           tried in the following order: dhcpcd, dhclient, pump and udhcpc.
 416           Otherwise, if udhcpc applet is enabled, it is used.
 417           Otherwise, ifup/ifdown will have no support for DHCP.
 418
 419 config BUSYBOX_CONFIG_INETD
 420         bool "inetd"
 421         default n
 422         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 423         help
 424           Internet superserver daemon
 425
 426 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
 427         bool "Support echo service"
 428         default n
 429         depends on BUSYBOX_CONFIG_INETD
 430         help
 431           Echo received data internal inetd service
 432
 433 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
 434         bool "Support discard service"
 435         default n
 436         depends on BUSYBOX_CONFIG_INETD
 437         help
 438           Internet /dev/null internal inetd service
 439
 440 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
 441         bool "Support time service"
 442         default n
 443         depends on BUSYBOX_CONFIG_INETD
 444         help
 445           Return 32 bit time since 1900 internal inetd service
 446
 447 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
 448         bool "Support daytime service"
 449         default n
 450         depends on BUSYBOX_CONFIG_INETD
 451         help
 452           Return human-readable time internal inetd service
 453
 454 config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
 455         bool "Support chargen service"
 456         default n
 457         depends on BUSYBOX_CONFIG_INETD
 458         help
 459           Familiar character generator internal inetd service
 460
 461 config BUSYBOX_CONFIG_FEATURE_INETD_RPC
 462         bool "Support RPC services"
 463         default n
 464         depends on BUSYBOX_CONFIG_INETD
 465         select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
 466         help
 467           Support Sun-RPC based services
 468
 469 config BUSYBOX_CONFIG_IP
 470         bool "ip"
 471         default n
 472         help
 473           The "ip" applet is a TCP/IP interface configuration and routing
 474           utility. You generally don't need "ip" to use busybox with
 475           TCP/IP.
 476
 477 config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
 478         bool "ip address"
 479         default n
 480         depends on BUSYBOX_CONFIG_IP
 481         help
 482           Address manipulation support for the "ip" applet.
 483
 484 config BUSYBOX_CONFIG_FEATURE_IP_LINK
 485         bool "ip link"
 486         default n
 487         depends on BUSYBOX_CONFIG_IP
 488         help
 489           Configure network devices with "ip".
 490
 491 config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 492         bool "ip route"
 493         default n
 494         depends on BUSYBOX_CONFIG_IP
 495         help
 496           Add support for routing table management to "ip".
 497
 498 config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
 499         bool "ip tunnel"
 500         default n
 501         depends on BUSYBOX_CONFIG_IP
 502         help
 503           Add support for tunneling commands to "ip".
 504
 505 config BUSYBOX_CONFIG_FEATURE_IP_RULE
 506         bool "ip rule"
 507         default n
 508         depends on BUSYBOX_CONFIG_IP
 509         help
 510           Add support for rule commands to "ip".
 511
 512 config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
 513         bool "Support short forms of ip commands"
 514         default n
 515         depends on BUSYBOX_CONFIG_IP
 516         help
 517           Also support short-form of ip <OBJECT> commands:
 518           ip addr   -> ipaddr
 519           ip link   -> iplink
 520           ip route  -> iproute
 521           ip tunnel -> iptunnel
 522           ip rule   -> iprule
 523
 524           Say N unless you desparately need the short form of the ip
 525           object commands.
 526
 527 config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
 528         bool "Support displaying rarely used link types"
 529         default n
 530         depends on BUSYBOX_CONFIG_IP
 531         help
 532           If you are not going to use links of type "frad", "econet",
 533           "bif" etc, you probably don't need to enable this.
 534           Ethernet, wireless, infrared, ppp/slip, ip tunnelling
 535           link types are supported without this option selected.
 536
 537 config BUSYBOX_CONFIG_IPADDR
 538         bool
 539         default n
 540         depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
 541
 542 config BUSYBOX_CONFIG_IPLINK
 543         bool
 544         default n
 545         depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
 546
 547 config BUSYBOX_CONFIG_IPROUTE
 548         bool
 549         default n
 550         depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
 551
 552 config BUSYBOX_CONFIG_IPTUNNEL
 553         bool
 554         default n
 555         depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
 556
 557 config BUSYBOX_CONFIG_IPRULE
 558         bool
 559         default n
 560         depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
 561
 562 config BUSYBOX_CONFIG_IPCALC
 563         bool "ipcalc"
 564         default n
 565         help
 566           ipcalc takes an IP address and netmask and calculates the
 567           resulting broadcast, network, and host range.
 568
 569 config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
 570         bool "Fancy IPCALC, more options, adds 1 kbyte"
 571         default n
 572         depends on BUSYBOX_CONFIG_IPCALC
 573         help
 574           Adds the options hostname, prefix and silent to the output of
 575           "ipcalc".
 576
 577 config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
 578         bool "Enable long options"
 579         default n
 580         depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_GETOPT_LONG
 581         help
 582           Support long options for the ipcalc applet.
 583
 584 config BUSYBOX_CONFIG_NAMEIF
 585         bool "nameif"
 586         default n
 587         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 588         help
 589           nameif is used to rename network interface by its MAC address.
 590           Renamed interfaces MUST be in the down state.
 591           It is possible to use a file (default: /etc/mactab)
 592           with list of new interface names and MACs.
 593           Maximum interface name length: IFNAMSIZ = 16
 594           File fields are separated by space or tab.
 595           File format:
 596           # Comment
 597           new_interface_name    XX:XX:XX:XX:XX:XX
 598
 599 config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
 600         bool "Extended nameif"
 601         default n
 602         depends on BUSYBOX_CONFIG_NAMEIF
 603         help
 604           This extends the nameif syntax to support the bus_info and driver
 605           checks. The syntax is compatible to the normal nameif.
 606           File format:
 607             new_interface_name  driver=asix bus=usb-0000:00:08.2-3
 608             new_interface_name  bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
 609             new_interface_name  mac=00:80:C8:38:91:B5
 610             new_interface_name  00:80:C8:38:91:B5
 611
 612 config BUSYBOX_CONFIG_NC
 613         bool "nc"
 614         default y
 615         help
 616           A simple Unix utility which reads and writes data across network
 617           connections.
 618
 619 config BUSYBOX_CONFIG_NETMSG
 620         bool "netmsg"
 621         default y
 622         help
 623           simple program for sending udp broadcast messages
 624
 625 config BUSYBOX_CONFIG_NC_SERVER
 626         bool "Netcat server options (-l)"
 627         default n
 628         depends on BUSYBOX_CONFIG_NC
 629         help
 630           Allow netcat to act as a server.
 631
 632 config BUSYBOX_CONFIG_NC_EXTRA
 633         bool "Netcat extensions (-eiw and filename)"
 634         default n
 635         depends on BUSYBOX_CONFIG_NC
 636         help
 637           Add -e (support for executing the rest of the command line after
 638           making or receiving a successful connection), -i (delay interval for
 639           lines sent), -w (timeout for initial connection).
 640
 641 config BUSYBOX_CONFIG_NETSTAT
 642         bool "netstat"
 643         default y
 644         help
 645           netstat prints information about the Linux networking subsystem.
 646
 647 config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
 648         bool "Enable wide netstat output"
 649         default y
 650         depends on BUSYBOX_CONFIG_NETSTAT
 651         help
 652           Add support for wide columns. Useful when displaying IPv6 addresses
 653           (-W option).
 654
 655 config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
 656         bool "Enable PID/Program name output"
 657         default y
 658         depends on BUSYBOX_CONFIG_NETSTAT
 659         help
 660           Add support for -p flag to print out PID and program name.
 661           +700 bytes of code.
 662
 663 config BUSYBOX_CONFIG_NSLOOKUP
 664         bool "nslookup"
 665         default y
 666         help
 667           nslookup is a tool to query Internet name servers.
 668
 669 config BUSYBOX_CONFIG_PING
 670         bool "ping"
 671         default y
 672         help
 673           ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
 674           elicit an ICMP ECHO_RESPONSE from a host or gateway.
 675
 676 config BUSYBOX_CONFIG_PING6
 677         bool "ping6"
 678         default y
 679         depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
 680         help
 681           This will give you a ping that can talk IPv6.
 682
 683 config BUSYBOX_CONFIG_FEATURE_FANCY_PING
 684         bool "Enable fancy ping output"
 685         default y
 686         depends on BUSYBOX_CONFIG_PING
 687         help
 688           Make the output from the ping applet include statistics, and at the
 689           same time provide full support for ICMP packets.
 690
 691 config BUSYBOX_CONFIG_PSCAN
 692         bool "pscan"
 693         default n
 694         help
 695           Simple network port scanner.
 696
 697 config BUSYBOX_CONFIG_ROUTE
 698         bool "route"
 699         default y
 700         help
 701           Route displays or manipulates the kernel's IP routing tables.
 702
 703 config BUSYBOX_CONFIG_SLATTACH
 704         bool "slattach"
 705         default n
 706         help
 707           slattach is a small utility to attach network interfaces to serial
 708           lines.
 709
 710 #config TC
 711 #       bool "tc"
 712 #       default n
 713 #       help
 714 #         show / manipulate traffic control settings
 715 #
 716 #config FEATURE_TC_INGRESS
 717 #       def_bool n
 718 #       depends on TC
 719
 720 config BUSYBOX_CONFIG_TELNET
 721         bool "telnet"
 722         default y
 723         help
 724           Telnet is an interface to the TELNET protocol, but is also commonly
 725           used to test other simple protocols.
 726
 727 config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
 728         bool "Pass TERM type to remote host"
 729         default y
 730         depends on BUSYBOX_CONFIG_TELNET
 731         help
 732           Setting this option will forward the TERM environment variable to the
 733           remote host you are connecting to. This is useful to make sure that
 734           things like ANSI colors and other control sequences behave.
 735
 736 config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
 737         bool "Pass USER type to remote host"
 738         default n
 739         depends on BUSYBOX_CONFIG_TELNET
 740         help
 741           Setting this option will forward the USER environment variable to the
 742           remote host you are connecting to. This is useful when you need to
 743           log into a machine without telling the username (autologin). This
 744           option enables `-a' and `-l USER' arguments.
 745
 746 config BUSYBOX_CONFIG_TELNETD
 747         bool "telnetd"
 748         default y
 749         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 750         help
 751           A daemon for the TELNET protocol, allowing you to log onto the host
 752           running the daemon. Please keep in mind that the TELNET protocol
 753           sends passwords in plain text. If you can't afford the space for an
 754           SSH daemon and you trust your network, you may say 'y' here. As a
 755           more secure alternative, you should seriously consider installing the
 756           very small Dropbear SSH daemon instead:
 757                 http://matt.ucc.asn.au/dropbear/dropbear.html
 758
 759           Note that for busybox telnetd to work you need several things:
 760           First of all, your kernel needs:
 761                   UNIX98_PTYS=y
 762                   DEVPTS_FS=y
 763
 764           Next, you need a /dev/pts directory on your root filesystem:
 765
 766                   $ ls -ld /dev/pts
 767                   drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
 768
 769           Next you need the pseudo terminal master multiplexer /dev/ptmx:
 770
 771                   $ ls -la /dev/ptmx
 772                   crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
 773
 774           Any /dev/ttyp[0-9]* files you may have can be removed.
 775           Next, you need to mount the devpts filesystem on /dev/pts using:
 776
 777                   mount -t devpts devpts /dev/pts
 778
 779           You need to be sure that Busybox has LOGIN and
 780           FEATURE_SUID enabled. And finally, you should make
 781           certain that Busybox has been installed setuid root:
 782
 783                 chown root.root /bin/busybox
 784                 chmod 4755 /bin/busybox
 785
 786           with all that done, telnetd _should_ work....
 787
 788
 789 config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
 790         bool "Support standalone telnetd (not inetd only)"
 791         default y
 792         depends on BUSYBOX_CONFIG_TELNETD
 793         help
 794           Selecting this will make telnetd able to run standalone.
 795
 796 config BUSYBOX_CONFIG_TFTP
 797         bool "tftp"
 798         default n
 799         help
 800           This enables the Trivial File Transfer Protocol client program. TFTP
 801           is usually used for simple, small transfers such as a root image
 802           for a network-enabled bootloader.
 803
 804 config BUSYBOX_CONFIG_TFTPD
 805         bool "tftpd"
 806         default n
 807         help
 808           This enables the Trivial File Transfer Protocol server program.
 809           It expects that stdin is a datagram socket and a packet
 810           is already pending on it. It will exit after one transfer.
 811           In other words: it should be run from inetd in nowait mode,
 812           or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
 813
 814 config BUSYBOX_CONFIG_FEATURE_TFTP_GET
 815         bool "Enable \"get\" command"
 816         default n
 817         depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 818         help
 819           Add support for the GET command within the TFTP client. This allows
 820           a client to retrieve a file from a TFTP server.
 821           Also enable upload support in tftpd, if tftpd is selected.
 822
 823 config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
 824         bool "Enable \"put\" command"
 825         default n
 826         depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 827         help
 828           Add support for the PUT command within the TFTP client. This allows
 829           a client to transfer a file to a TFTP server.
 830           Also enable download support in tftpd, if tftpd is selected.
 831
 832 config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
 833         bool "Enable \"blksize\" protocol option"
 834         default n
 835         depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 836         help
 837           Allow tftp to specify block size, and tftpd to understand
 838           "blksize" option.
 839
 840 config BUSYBOX_CONFIG_TFTP_DEBUG
 841         bool "Enable debug"
 842         default n
 843         depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
 844         help
 845           Enable debug settings for tftp. This is useful if you're running
 846           into problems with tftp as the protocol doesn't help you much when
 847           you run into problems.
 848
 849 config BUSYBOX_CONFIG_TRACEROUTE
 850         bool "traceroute"
 851         default y
 852         help
 853           Utility to trace the route of IP packets
 854
 855 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
 856         bool "Enable verbose output"
 857         default y
 858         depends on BUSYBOX_CONFIG_TRACEROUTE
 859         help
 860           Add some verbosity to traceroute. This includes among other things
 861           hostnames and ICMP response types.
 862
 863 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
 864         bool "Enable loose source route"
 865         default n
 866         depends on BUSYBOX_CONFIG_TRACEROUTE
 867         help
 868           Add option to specify a loose source route gateway
 869           (8 maximum).
 870
 871 config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
 872         bool "Use ICMP instead of UDP"
 873         default n
 874         depends on BUSYBOX_CONFIG_TRACEROUTE
 875         help
 876           Add option -I to use ICMP ECHO instead of UDP datagrams.
 877
 878 source package/busybox/config/networking/udhcp/Config.in
 879
 880 config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
 881         string "ifup udhcpc command line options"
 882         default "-R -n"
 883         depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_APP_UDHCPC
 884         help
 885           Command line options to pass to udhcpc from ifup.
 886           Intended to alter options not available in /etc/network/interfaces.
 887           (IE: --syslog --background etc...)
 888
 889 config BUSYBOX_CONFIG_VCONFIG
 890         bool "vconfig"
 891         default y
 892         help
 893           Creates, removes, and configures VLAN interfaces
 894
 895 config BUSYBOX_CONFIG_WGET
 896         bool "wget"
 897         default y
 898         help
 899           wget is a utility for non-interactive download of files from HTTP,
 900           HTTPS, and FTP servers.
 901
 902 config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
 903         bool "Enable a nifty process meter (+2k)"
 904         default y
 905         depends on BUSYBOX_CONFIG_WGET
 906         help
 907           Enable the transfer progress bar for wget transfers.
 908
 909 config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
 910         bool "Enable HTTP authentication"
 911         default y
 912         depends on BUSYBOX_CONFIG_WGET
 913         help
 914           Support authenticated HTTP transfers.
 915
 916 config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
 917         bool "Enable long options"
 918         default y
 919         depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_GETOPT_LONG
 920         help
 921           Support long options for the wget applet.
 922
 923 config BUSYBOX_CONFIG_ZCIP
 924         bool "zcip"
 925         default n
 926         select BUSYBOX_CONFIG_FEATURE_SYSLOG
 927         help
 928           ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
 929           It's a daemon that allocates and defends a dynamically assigned
 930           address on the 169.254/16 network, requiring no system administrator.
 931
 932           See http://www.zeroconf.org for further details, and "zcip.script"
 933           in the busybox examples.
 934
 935 config BUSYBOX_CONFIG_TCPSVD
 936         bool "tcpsvd"
 937         default n
 938         help
 939           tcpsvd listens on a TCP port and runs a program for each new
 940           connection.
 941
 942 config BUSYBOX_CONFIG_TUNCTL
 943         bool "tunctl"
 944         default n
 945         help
 946           tunctl creates or deletes tun devices.
 947
 948 config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
 949         bool "Support owner:group assignment"
 950         default n
 951         depends on BUSYBOX_CONFIG_TUNCTL
 952         help
 953           Allow to specify owner and group of newly created interface.
 954           340 bytes of pure bloat. Say no here.
 955
 956 config BUSYBOX_CONFIG_UDPSVD
 957         bool "udpsvd"
 958         default n
 959         help
 960           udpsvd listens on an UDP port and runs a program for each new
 961           connection.
 962
 963 endmenu