package/network/config/ltq-vdsl-app/files/dsl_control

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2012 OpenWrt.org
   3
   4 # needs to start before the atm layer which starts at 50
   5 START=48
   6 USE_PROCD=1
   7
   8 EXTRA_COMMANDS="status lucistat"
   9 EXTRA_HELP="    status  Get DSL status information
  10         lucistat  Get status information if lua friendly format"
  11
  12 [ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
  13
  14 #
  15 # ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
  16 #
  17 # G.992.1 Annex A
  18 # G.992.3 Annex A / L-US1 / L_US-2 / M
  19 # G.992.5 Annex A / M
  20 # G.993.2 Annex A/B/C
  21 xtse_xdsl_a="04_00_04_00_4C_01_04_07"
  22
  23 # G.992.1 Annex B
  24 # G.992.3 Annex B
  25 # G.992.5 Annex B
  26 # G.993.2 Annex A/B/C
  27 xtse_adsl_b="10_00_10_00_00_04_00_07"
  28
  29 # G.992.1 Annex B
  30 # G.992.3 Annex B
  31 # G.992.3 Annex J
  32 # G.992.5 Annex B
  33 # G.992.5 Annex J
  34 # G.993.2 Annex A/B/C
  35 xtse_adsl_j="10_00_10_40_00_04_01_07"
  36
  37 xtse_vdsl="00_00_00_00_00_00_00_07"
  38
  39 service_triggers() {
  40         procd_add_reload_trigger network
  41 }
  42
  43 start_service() {
  44         local annex
  45         local firmware
  46         local xtse
  47         local mode
  48
  49         config_load network
  50         config_get annex dsl annex
  51         config_get firmware dsl firmware
  52         config_get xfer_mode dsl xfer_mode
  53
  54         [ -z "${xfer_mode}" ] && xfer_mode=ptm
  55
  56         case "${xfer_mode}" in
  57         atm)
  58                 LOAD=ltq_atm_vr9
  59                 UNLOAD=ltq_ptm_vr9
  60                 mode=1
  61                 ;;
  62         *)
  63                 LOAD=ltq_ptm_vr9
  64                 UNLOAD=ltq_atm_vr9
  65                 mode=2
  66                 ;;
  67         esac
  68
  69         eval "xtse=\"\${xtse_xdsl_$annex}\""
  70         [ -z "${xtse}" ] && xtse=$xtse_vdsl
  71
  72         [ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
  73         [ -f "${firmware}" ] || {
  74                 echo failed to find $firmware
  75                 return 1
  76         }
  77
  78         procd_open_instance
  79         procd_set_param command /sbin/vdsl_cpe_control_wrapper \
  80                         -i$xtse \
  81                         -n /sbin/dsl_notify.sh \
  82                         -f ${firmware} \
  83                         -M ${mode}
  84         procd_append_param env "LOAD=$LOAD" "UNLOAD=$UNLOAD"
  85         procd_close_instance
  86 }
  87
  88 stop_service() {
  89         DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
  90         DSL_INTERFACE_STATUS="DOWN" \
  91                 /sbin/dsl_notify.sh
  92 }