package/network/utils/iw/patches/001-nl80211_h_sync.patch

   1 --- a/nl80211.h
   2 +++ b/nl80211.h
   3 @@ -11,7 +11,7 @@
   4   * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
   5   * Copyright 2008 Colin McCabe <colin@cozybit.com>
   6   * Copyright 2015-2017 Intel Deutschland GmbH
   7 - * Copyright (C) 2018-2022 Intel Corporation
   8 + * Copyright (C) 2018-2021 Intel Corporation
   9   *
  10   * Permission to use, copy, modify, and/or distribute this software for any
  11   * purpose with or without fee is hereby granted, provided that the above
  12 @@ -301,29 +301,6 @@
  13   */
  14
  15  /**
  16 - * DOC: FILS shared key crypto offload
  17 - *
  18 - * This feature is applicable to drivers running in AP mode.
  19 - *
  20 - * FILS shared key crypto offload can be advertised by drivers by setting
  21 - * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
  22 - * FILS shared key crypto offload should be able to encrypt and decrypt
  23 - * association frames for FILS shared key authentication as per IEEE 802.11ai.
  24 - * With this capability, for FILS key derivation, drivers depend on userspace.
  25 - *
  26 - * After FILS key derivation, userspace shares the FILS AAD details with the
  27 - * driver and the driver stores the same to use in decryption of association
  28 - * request and in encryption of association response. The below parameters
  29 - * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
  30 - *     %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
  31 - *     %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
  32 - *     %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
  33 - *                     (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
  34 - *
  35 - * Once the association is done, the driver cleans the FILS AAD data.
  36 - */
  37 -
  38 -/**
  39   * enum nl80211_commands - supported nl80211 commands
  40   *
  41   * @NL80211_CMD_UNSPEC: unspecified command to catch errors
  42 @@ -1226,17 +1203,6 @@
  43   * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
  44   *     has completed
  45   *
  46 - * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
  47 - *     &NL80211_ATTR_MAC - for STA MAC address
  48 - *     &NL80211_ATTR_FILS_KEK - for KEK
  49 - *     &NL80211_ATTR_FILS_NONCES - for FILS Nonces
  50 - *             (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
  51 - *
  52 - * @NL80211_CMD_ASSOC_COMEBACK: notification about an association
  53 - *      temporal rejection with comeback. The event includes %NL80211_ATTR_MAC
  54 - *      to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
  55 - *      specify the timeout value.
  56 - *
  57   * @NL80211_CMD_MAX: highest used command number
  58   * @__NL80211_CMD_AFTER_LAST: internal use
  59   */
  60 @@ -1477,10 +1443,6 @@ enum nl80211_commands {
  61         NL80211_CMD_COLOR_CHANGE_ABORTED,
  62         NL80211_CMD_COLOR_CHANGE_COMPLETED,
  63
  64 -       NL80211_CMD_SET_FILS_AAD,
  65 -
  66 -       NL80211_CMD_ASSOC_COMEBACK,
  67 -
  68         /* add new commands above here */
  69
  70         /* used to define NL80211_CMD_MAX below */
  71 @@ -2477,9 +2439,7 @@ enum nl80211_commands {
  72   *     space supports external authentication. This attribute shall be used
  73   *     with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
  74   *     may offload authentication processing to user space if this capability
  75 - *     is indicated in the respective requests from the user space. (This flag
  76 - *     attribute deprecated for %NL80211_CMD_START_AP, use
  77 - *     %NL80211_ATTR_AP_SETTINGS_FLAGS)
  78 + *     is indicated in the respective requests from the user space.
  79   *
  80   * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
  81   *     u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
  82 @@ -2655,13 +2615,8 @@ enum nl80211_commands {
  83   *     switching on a different channel during CAC detection on the selected
  84   *     radar channel.
  85   *
  86 - * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
  87 - *     enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
  88 - *     used with %NL80211_CMD_START_AP request.
  89 - *
  90 - * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from
  91 - *     association request when used with NL80211_CMD_NEW_STATION). Can be set
  92 - *     only if %NL80211_STA_FLAG_WME is set.
  93 + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
  94 + *     transmit power to stay within regulatory limits. u32, dBi.
  95   *
  96   * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  97   * @NL80211_ATTR_MAX: highest attribute number currently defined
  98 @@ -3171,11 +3126,7 @@ enum nl80211_attrs {
  99
 100         NL80211_ATTR_RADAR_BACKGROUND,
 101
 102 -       NL80211_ATTR_AP_SETTINGS_FLAGS,
 103 -
 104 -       NL80211_ATTR_EHT_CAPABILITY,
 105 -
 106 -       NL80211_ATTR_DISABLE_EHT,
 107 +       NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 108
 109         /* add attributes here, update the policy in nl80211.c */
 110
 111 @@ -3232,8 +3183,6 @@ enum nl80211_attrs {
 112  #define NL80211_HE_MAX_CAPABILITY_LEN           54
 113  #define NL80211_MAX_NR_CIPHER_SUITES           5
 114  #define NL80211_MAX_NR_AKM_SUITES              2
 115 -#define NL80211_EHT_MIN_CAPABILITY_LEN          13
 116 -#define NL80211_EHT_MAX_CAPABILITY_LEN          51
 117
 118  #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME     10
 119
 120 @@ -3261,7 +3210,7 @@ enum nl80211_attrs {
 121   *     and therefore can't be created in the normal ways, use the
 122   *     %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
 123   *     commands to create and destroy one
 124 - * @NL80211_IFTYPE_OCB: Outside Context of a BSS
 125 + * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
 126   *     This mode corresponds to the MIB variable dot11OCBActivated=true
 127   * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
 128   * @NL80211_IFTYPE_MAX: highest interface type number currently defined
 129 @@ -3403,56 +3352,6 @@ enum nl80211_he_ru_alloc {
 130  };
 131
 132  /**
 133 - * enum nl80211_eht_gi - EHT guard interval
 134 - * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec
 135 - * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec
 136 - * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec
 137 - */
 138 -enum nl80211_eht_gi {
 139 -       NL80211_RATE_INFO_EHT_GI_0_8,
 140 -       NL80211_RATE_INFO_EHT_GI_1_6,
 141 -       NL80211_RATE_INFO_EHT_GI_3_2,
 142 -};
 143 -
 144 -/**
 145 - * enum nl80211_eht_ru_alloc - EHT RU allocation values
 146 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation
 147 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation
 148 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation
 149 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation
 150 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation
 151 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation
 152 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation
 153 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation
 154 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation
 155 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation
 156 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation
 157 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation
 158 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation
 159 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation
 160 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation
 161 - * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation
 162 - */
 163 -enum nl80211_eht_ru_alloc {
 164 -       NL80211_RATE_INFO_EHT_RU_ALLOC_26,
 165 -       NL80211_RATE_INFO_EHT_RU_ALLOC_52,
 166 -       NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,
 167 -       NL80211_RATE_INFO_EHT_RU_ALLOC_106,
 168 -       NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,
 169 -       NL80211_RATE_INFO_EHT_RU_ALLOC_242,
 170 -       NL80211_RATE_INFO_EHT_RU_ALLOC_484,
 171 -       NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,
 172 -       NL80211_RATE_INFO_EHT_RU_ALLOC_996,
 173 -       NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,
 174 -       NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,
 175 -       NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,
 176 -       NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,
 177 -       NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,
 178 -       NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,
 179 -       NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,
 180 -};
 181 -
 182 -/**
 183   * enum nl80211_rate_info - bitrate information
 184   *
 185   * These attribute types are used with %NL80211_STA_INFO_TXRATE
 186 @@ -3491,13 +3390,6 @@ enum nl80211_eht_ru_alloc {
 187   * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
 188   * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
 189   *     non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
 190 - * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
 191 - * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
 192 - * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8)
 193 - * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier
 194 - *     (u8, see &enum nl80211_eht_gi)
 195 - * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
 196 - *     non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
 197   * @__NL80211_RATE_INFO_AFTER_LAST: internal use
 198   */
 199  enum nl80211_rate_info {
 200 @@ -3519,11 +3411,6 @@ enum nl80211_rate_info {
 201         NL80211_RATE_INFO_HE_GI,
 202         NL80211_RATE_INFO_HE_DCM,
 203         NL80211_RATE_INFO_HE_RU_ALLOC,
 204 -       NL80211_RATE_INFO_320_MHZ_WIDTH,
 205 -       NL80211_RATE_INFO_EHT_MCS,
 206 -       NL80211_RATE_INFO_EHT_NSS,
 207 -       NL80211_RATE_INFO_EHT_GI,
 208 -       NL80211_RATE_INFO_EHT_RU_ALLOC,
 209
 210         /* keep last */
 211         __NL80211_RATE_INFO_AFTER_LAST,
 212 @@ -3834,20 +3721,13 @@ enum nl80211_mpath_info {
 213   *     capabilities IE
 214   * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
 215   *     defined in HE capabilities IE
 216 + * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
 217 + *     defined
 218   * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
 219   *     given for all 6 GHz band channels
 220   * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
 221   *     advertised on this band/for this iftype (binary)
 222 - * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT
 223 - *     capabilities element
 224 - * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT
 225 - *     capabilities element
 226 - * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT
 227 - *     capabilities element
 228 - * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as
 229 - *     defined in EHT capabilities element
 230   * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
 231 - * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
 232   */
 233  enum nl80211_band_iftype_attr {
 234         __NL80211_BAND_IFTYPE_ATTR_INVALID,
 235 @@ -3859,10 +3739,6 @@ enum nl80211_band_iftype_attr {
 236         NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
 237         NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
 238         NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
 239 -       NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,
 240 -       NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
 241 -       NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
 242 -       NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
 243
 244         /* keep last */
 245         __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
 246 @@ -4007,10 +3883,6 @@ enum nl80211_wmm_rule {
 247   *     on this channel in current regulatory domain.
 248   * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
 249   *     on this channel in current regulatory domain.
 250 - * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel
 251 - *     as the primary or any of the secondary channels isn't possible
 252 - * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
 253 - *     in current regulatory domain.
 254   * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
 255   *     currently defined
 256   * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
 257 @@ -4047,8 +3919,6 @@ enum nl80211_frequency_attr {
 258         NL80211_FREQUENCY_ATTR_4MHZ,
 259         NL80211_FREQUENCY_ATTR_8MHZ,
 260         NL80211_FREQUENCY_ATTR_16MHZ,
 261 -       NL80211_FREQUENCY_ATTR_NO_320MHZ,
 262 -       NL80211_FREQUENCY_ATTR_NO_EHT,
 263
 264         /* keep last */
 265         __NL80211_FREQUENCY_ATTR_AFTER_LAST,
 266 @@ -4247,7 +4117,6 @@ enum nl80211_sched_scan_match_attr {
 267   * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
 268   * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
 269   * @NL80211_RRF_NO_HE: HE operation not allowed
 270 - * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
 271   */
 272  enum nl80211_reg_rule_flags {
 273         NL80211_RRF_NO_OFDM             = 1<<0,
 274 @@ -4266,7 +4135,6 @@ enum nl80211_reg_rule_flags {
 275         NL80211_RRF_NO_80MHZ            = 1<<15,
 276         NL80211_RRF_NO_160MHZ           = 1<<16,
 277         NL80211_RRF_NO_HE               = 1<<17,
 278 -       NL80211_RRF_NO_320MHZ           = 1<<18,
 279  };
 280
 281  #define NL80211_RRF_PASSIVE_SCAN       NL80211_RRF_NO_IR
 282 @@ -4764,8 +4632,6 @@ enum nl80211_key_mode {
 283   * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
 284   * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
 285   * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
 286 - * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
 287 - *     attribute must be provided as well
 288   */
 289  enum nl80211_chan_width {
 290         NL80211_CHAN_WIDTH_20_NOHT,
 291 @@ -4781,7 +4647,6 @@ enum nl80211_chan_width {
 292         NL80211_CHAN_WIDTH_4,
 293         NL80211_CHAN_WIDTH_8,
 294         NL80211_CHAN_WIDTH_16,
 295 -       NL80211_CHAN_WIDTH_320,
 296  };
 297
 298  /**
 299 @@ -5096,7 +4961,6 @@ enum nl80211_txrate_gi {
 300   * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
 301   * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
 302   * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
 303 - * @NL80211_BAND_LC: light communication band (placeholder)
 304   * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
 305   *     since newer kernel versions may support more bands
 306   */
 307 @@ -5106,7 +4970,6 @@ enum nl80211_band {
 308         NL80211_BAND_60GHZ,
 309         NL80211_BAND_6GHZ,
 310         NL80211_BAND_S1GHZ,
 311 -       NL80211_BAND_LC,
 312
 313         NUM_NL80211_BANDS,
 314  };
 315 @@ -5673,7 +5536,7 @@ enum nl80211_iface_limit_attrs {
 316   *     => allows 8 of AP/GO that can have BI gcd >= min gcd
 317   *
 318   *     numbers = [ #{STA} <= 2 ], channels = 2, max = 2
 319 - *     => allows two STAs on the same or on different channels
 320 + *     => allows two STAs on different channels
 321   *
 322   *     numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
 323   *     => allows a STA plus three P2P interfaces
 324 @@ -5718,7 +5581,7 @@ enum nl80211_if_combination_attrs {
 325   * @NL80211_PLINK_ESTAB: mesh peer link is established
 326   * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
 327   * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
 328 - *     plink are discarded, except for authentication frames
 329 + *     plink are discarded
 330   * @NUM_NL80211_PLINK_STATES: number of peer link states
 331   * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
 332   */
 333 @@ -5855,15 +5718,13 @@ enum nl80211_tdls_operation {
 334         NL80211_TDLS_DISABLE_LINK,
 335  };
 336
 337 -/**
 338 +/*
 339   * enum nl80211_ap_sme_features - device-integrated AP features
 340 - * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver
 341 - *     when user space indicates support for SA Query procedures offload during
 342 - *     "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.
 343 - */
 344 + * Reserved for future use, no bits are defined in
 345 + * NL80211_ATTR_DEVICE_AP_SME yet.
 346  enum nl80211_ap_sme_features {
 347 -       NL80211_AP_SME_SA_QUERY_OFFLOAD         = 1 << 0,
 348  };
 349 + */
 350
 351  /**
 352   * enum nl80211_feature_flags - device/driver features
 353 @@ -6166,11 +6027,6 @@ enum nl80211_feature_flags {
 354   * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
 355   *     detection and change announcemnts.
 356   *
 357 - * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
 358 - *     FILS encryption and decryption for (Re)Association Request and Response
 359 - *     frames. Userspace has to share FILS AAD details to the driver by using
 360 - *     @NL80211_CMD_SET_FILS_AAD.
 361 - *
 362   * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC
 363   *     detection.
 364   *
 365 @@ -6239,7 +6095,6 @@ enum nl80211_ext_feature_index {
 366         NL80211_EXT_FEATURE_SECURE_RTT,
 367         NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
 368         NL80211_EXT_FEATURE_BSS_COLOR,
 369 -       NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
 370         NL80211_EXT_FEATURE_RADAR_BACKGROUND,
 371
 372         /* add new features before the definition below */
 373 @@ -7548,7 +7403,7 @@ enum nl80211_sar_specs_attrs {
 374   * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
 375   *     to advertise the maximum profile periodicity supported by the driver
 376   *     if EMA is enabled. Driver should indicate EMA support to the userspace
 377 - *     by setting wiphy->ema_max_profile_periodicity to
 378 + *     by setting wiphy->mbssid_max_ema_profile_periodicity to
 379   *     a non-zero value.
 380   *
 381   * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
 382 @@ -7567,7 +7422,7 @@ enum nl80211_sar_specs_attrs {
 383   *
 384   * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
 385   *     Setting this flag is permitted only if the driver advertises EMA support
 386 - *     by setting wiphy->ema_max_profile_periodicity to non-zero.
 387 + *     by setting wiphy->mbssid_max_ema_profile_periodicity to non-zero.
 388   *
 389   * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
 390   * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
 391 @@ -7586,20 +7441,4 @@ enum nl80211_mbssid_config_attributes {
 392         NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
 393  };
 394
 395 -/**
 396 - * enum nl80211_ap_settings_flags - AP settings flags
 397 - *
 398 - * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
 399 - *     authentication.
 400 - * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
 401 - *     procedures offload to driver. If driver advertises
 402 - *     %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
 403 - *     ignore SA Query procedures and validations when this flag is set by
 404 - *     userspace.
 405 - */
 406 -enum nl80211_ap_settings_flags {
 407 -       NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT       = 1 << 0,
 408 -       NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT    = 1 << 1,
 409 -};
 410 -
 411  #endif /* __LINUX_NL80211_H */
 412 --- a/event.c
 413 +++ b/event.c
 414 @@ -1292,9 +1292,6 @@ static int print_event(struct nl_msg *ms
 415         case NL80211_CMD_CH_SWITCH_NOTIFY:
 416                 parse_ch_switch_notify(tb, gnlh->cmd);
 417                 break;
 418 -       case NL80211_CMD_ASSOC_COMEBACK: /* 147 */
 419 -               parse_assoc_comeback(tb, gnlh->cmd);
 420 -               break;
 421         default:
 422                 printf("unknown event %d (%s)\n",
 423                        gnlh->cmd, command_name(gnlh->cmd));
 424 --- a/info.c
 425 +++ b/info.c
 426 @@ -164,7 +164,6 @@ static void ext_feat_print(enum nl80211_
 427         ext_feat_case(PROT_RANGE_NEGO_AND_MEASURE,
 428                       "support for MFP in range measurement negotiation/procedure");
 429         ext_feat_case(BSS_COLOR, "BSS coloring support");
 430 -       ext_feat_case(FILS_CRYPTO_OFFLOAD, "FILS crypto offload");
 431         ext_feat_case(RADAR_BACKGROUND, "Radar background support");
 432         }
 433  }
 434 --- a/interface.c
 435 +++ b/interface.c
 436 @@ -362,8 +362,6 @@ char *channel_width_name(enum nl80211_ch
 437                 return "5 MHz";
 438         case NL80211_CHAN_WIDTH_10:
 439                 return "10 MHz";
 440 -       case NL80211_CHAN_WIDTH_320:
 441 -               return "320 MHz";
 442         default:
 443                 return "unknown";
 444         }
 445 --- a/util.c
 446 +++ b/util.c
 447 @@ -508,7 +508,6 @@ static int parse_freqs(struct chandef *c
 448         case NL80211_CHAN_WIDTH_40:
 449         case NL80211_CHAN_WIDTH_80:
 450         case NL80211_CHAN_WIDTH_160:
 451 -       case NL80211_CHAN_WIDTH_320:
 452                 need_cf1 = true;
 453                 break;
 454         case NL80211_CHAN_WIDTH_1:
 455 @@ -626,10 +625,6 @@ int parse_freqchan(struct chandef *chand
 456                   .width = NL80211_CHAN_WIDTH_160,
 457                   .freq1_diff = 0,
 458                   .chantype = -1 },
 459 -               { .name = "320MHz",
 460 -                 .width = NL80211_CHAN_WIDTH_320,
 461 -                 .freq1_diff = 0,
 462 -                 .chantype = -1 },
 463         };
 464         const struct chanmode *chanmode_selected = NULL;
 465         unsigned int freq;
 466 @@ -1599,48 +1594,6 @@ void print_eht_info(struct nlattr *nl_if
 467         print_iftype_line(tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES]);
 468         printf("\n");
 469
 470 -       if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]) {
 471 -               len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]);
 472 -               if (len > sizeof(mac_cap))
 473 -                       len = sizeof(mac_cap);
 474 -               memcpy(mac_cap,
 475 -                      nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]),
 476 -                      len);
 477 -       }
 478 -
 479 -       if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]) {
 480 -               len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]);
 481 -
 482 -               if (len > sizeof(phy_cap))
 483 -                       len = sizeof(phy_cap);
 484 -
 485 -               memcpy(phy_cap,
 486 -                      nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]),
 487 -                      len);
 488 -       }
 489 -
 490 -       if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]) {
 491 -               len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]);
 492 -               if (len > sizeof(mcs_set))
 493 -                       len = sizeof(mcs_set);
 494 -               memcpy(mcs_set,
 495 -                      nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]),
 496 -                      len);
 497 -
 498 -               // Assume that all parts of the MCS set are present
 499 -               mcs_len = sizeof(mcs_set);
 500 -       }
 501 -
 502 -       if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]) {
 503 -               len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]);
 504 -               if (len > sizeof(ppet))
 505 -                       len = sizeof(ppet);
 506 -               memcpy(ppet,
 507 -                      nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]),
 508 -                      len);
 509 -               ppet_len = len;
 510 -       }
 511 -
 512         if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]) {
 513                 len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]);
 514
 515 --- a/reg.c
 516 +++ b/reg.c
 517 @@ -210,7 +210,6 @@ static int print_reg_handler(struct nl_m
 518                 PARSE_FLAG(NL80211_RRF_NO_80MHZ, "NO-80MHZ");
 519                 PARSE_FLAG(NL80211_RRF_NO_160MHZ, "NO-160MHZ");
 520                 PARSE_FLAG(NL80211_RRF_NO_HE, "NO-HE");
 521 -               PARSE_FLAG(NL80211_RRF_NO_320MHZ, "NO-320MHZ");
 522
 523                 /* Kernels that support NO_IR always turn on both flags */
 524                 if ((flags & NL80211_RRF_NO_IR) && (flags & __NL80211_RRF_NO_IBSS)) {
 525 --- a/station.c
 526 +++ b/station.c
 527 @@ -239,8 +239,6 @@ void parse_bitrate(struct nlattr *bitrat
 528                 pos += snprintf(pos, buflen - (pos - buf), " 80P80MHz");
 529         if (rinfo[NL80211_RATE_INFO_160_MHZ_WIDTH])
 530                 pos += snprintf(pos, buflen - (pos - buf), " 160MHz");
 531 -       if (rinfo[NL80211_RATE_INFO_320_MHZ_WIDTH])
 532 -               pos += snprintf(pos, buflen - (pos - buf), " 320MHz");
 533         if (rinfo[NL80211_RATE_INFO_SHORT_GI])
 534                 pos += snprintf(pos, buflen - (pos - buf), " short GI");
 535         if (rinfo[NL80211_RATE_INFO_VHT_NSS])
 536 @@ -261,18 +259,6 @@ void parse_bitrate(struct nlattr *bitrat
 537         if (rinfo[NL80211_RATE_INFO_HE_RU_ALLOC])
 538                 pos += snprintf(pos, buflen - (pos - buf),
 539                                 " HE-RU-ALLOC %d", nla_get_u8(rinfo[NL80211_RATE_INFO_HE_RU_ALLOC]));
 540 -       if (rinfo[NL80211_RATE_INFO_EHT_MCS])
 541 -               pos += snprintf(pos, buflen - (pos - buf),
 542 -                               " EHT-MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_MCS]));
 543 -       if (rinfo[NL80211_RATE_INFO_EHT_NSS])
 544 -               pos += snprintf(pos, buflen - (pos - buf),
 545 -                               " EHT-NSS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_NSS]));
 546 -       if (rinfo[NL80211_RATE_INFO_EHT_GI])
 547 -               pos += snprintf(pos, buflen - (pos - buf),
 548 -                               " EHT-GI %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_GI]));
 549 -       if (rinfo[NL80211_RATE_INFO_EHT_RU_ALLOC])
 550 -               pos += snprintf(pos, buflen - (pos - buf),
 551 -                               " EHT-RU-ALLOC %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_RU_ALLOC]));
 552  }
 553
 554  static char *get_chain_signal(struct nlattr *attr_list)