ar71xx: clean up spi controller related patches
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ath79 / mach-alfa-ap96.c
1 /*
2 * ALFA Network AP96 board support
3 *
4 * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/init.h>
12 #include <linux/bitops.h>
13 #include <linux/gpio.h>
14 #include <linux/platform_device.h>
15 #include <linux/mmc/host.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/mmc_spi.h>
18
19 #include <asm/mach-ath79/ath79.h>
20 #include <asm/mach-ath79/ar71xx_regs.h>
21
22 #include "common.h"
23 #include "dev-eth.h"
24 #include "dev-gpio-buttons.h"
25 #include "dev-spi.h"
26 #include "dev-usb.h"
27 #include "machtypes.h"
28 #include "pci.h"
29
30 #define ALFA_AP96_GPIO_PCIE_RESET 2
31 #define ALFA_AP96_GPIO_SIM_DETECT 3
32 #define ALFA_AP96_GPIO_MICROSD_CD 4
33 #define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
34
35 #define ALFA_AP96_GPIO_BUTTON_RESET 11
36
37 #define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
38 #define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
39
40 static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
41 {
42 .desc = "Reset button",
43 .type = EV_KEY,
44 .code = KEY_RESTART,
45 .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
46 .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
47 .active_low = 1,
48 }
49 };
50
51 static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
52 .flags = MMC_SPI_USE_CD_GPIO,
53 .cd_gpio = ALFA_AP96_GPIO_MICROSD_CD,
54 .cd_debounce = 1,
55 .caps = MMC_CAP_NEEDS_POLL,
56 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
57 };
58
59 static struct spi_board_info alfa_ap96_spi_info[] = {
60 {
61 .bus_num = 0,
62 .chip_select = 0,
63 .max_speed_hz = 25000000,
64 .modalias = "m25p80",
65 }, {
66 .bus_num = 0,
67 .chip_select = 1,
68 .max_speed_hz = 25000000,
69 .modalias = "mmc_spi",
70 .platform_data = &alfa_ap96_mmc_data,
71 }, {
72 .bus_num = 0,
73 .chip_select = 2,
74 .max_speed_hz = 6250000,
75 .modalias = "rtc-pcf2123",
76 },
77 };
78
79 static struct ath79_spi_platform_data alfa_ap96_spi_data = {
80 .bus_num = 0,
81 .num_chipselect = 3,
82 };
83
84 static void __init alfa_ap96_gpio_setup(void)
85 {
86 ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
87 AR71XX_GPIO_FUNC_SPI_CS2_EN);
88
89 gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
90 gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
91 gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
92 gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
93 gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
94 gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
95 }
96
97 #define ALFA_AP96_WAN_PHYMASK BIT(4)
98 #define ALFA_AP96_LAN_PHYMASK BIT(5)
99 #define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
100
101 static void __init alfa_ap96_init(void)
102 {
103 alfa_ap96_gpio_setup();
104
105 ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
106
107 ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
108 ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
109 ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
110 ath79_eth1_pll_data.pll_1000 = 0x110000;
111
112 ath79_register_eth(0);
113
114 ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
115 ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
116 ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
117 ath79_eth1_pll_data.pll_1000 = 0x110000;
118
119 ath79_register_eth(1);
120
121 ath79_register_pci();
122 ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
123 ARRAY_SIZE(alfa_ap96_spi_info));
124
125 ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
126 ARRAY_SIZE(alfa_ap96_gpio_keys),
127 alfa_ap96_gpio_keys);
128 ath79_register_usb();
129 }
130
131 MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
132 alfa_ap96_init);