2 * MikroTik RouterBOARD 2011 support
4 * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
5 * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
12 #define pr_fmt(fmt) "rb2011: " fmt
14 #include <linux/phy.h>
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/ath9k_platform.h>
18 #include <linux/ar8216_platform.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/nand.h>
21 #include <linux/mtd/partitions.h>
22 #include <linux/spi/spi.h>
23 #include <linux/spi/flash.h>
24 #include <linux/rle.h>
25 #include <linux/routerboot.h>
26 #include <linux/gpio.h>
28 #include <asm/mach-ath79/ath79.h>
29 #include <asm/mach-ath79/ar71xx_regs.h>
33 #include "dev-m25p80.h"
37 #include "machtypes.h"
38 #include "routerboot.h"
40 #define RB2011_GPIO_NAND_NCE 14
41 #define RB2011_GPIO_SFP_LOS 21
43 #define RB_ROUTERBOOT_OFFSET 0x0000
44 #define RB_ROUTERBOOT_MIN_SIZE 0xb000
45 #define RB_HARD_CFG_SIZE 0x1000
46 #define RB_BIOS_OFFSET 0xd000
47 #define RB_BIOS_SIZE 0x1000
48 #define RB_SOFT_CFG_OFFSET 0xf000
49 #define RB_SOFT_CFG_SIZE 0x1000
51 #define RB_ART_SIZE 0x10000
53 static struct mtd_partition rb2011_spi_partitions
[] = {
56 .offset
= RB_ROUTERBOOT_OFFSET
,
57 .mask_flags
= MTD_WRITEABLE
,
59 .name
= "hard_config",
60 .size
= RB_HARD_CFG_SIZE
,
61 .mask_flags
= MTD_WRITEABLE
,
64 .offset
= RB_BIOS_OFFSET
,
66 .mask_flags
= MTD_WRITEABLE
,
68 .name
= "soft_config",
69 .size
= RB_SOFT_CFG_SIZE
,
74 static void __init
rb2011_init_partitions(void)
76 u8
*addr
= (u8
*) KSEG1ADDR(0x1f000000);
77 u32 next
= RB_ROUTERBOOT_MIN_SIZE
;
79 if (routerboot_find_magic(addr
, 0x10000, &next
, true))
80 printk(KERN_ERR
"Warning: could not find a valid RouterBOOT hard config\n");
81 rb2011_spi_partitions
[0].size
= next
;
82 rb2011_spi_partitions
[1].offset
= next
;
84 next
= RB_BIOS_OFFSET
+ RB_BIOS_SIZE
;
85 if (routerboot_find_magic(addr
, 0x10000, &next
, false))
86 printk(KERN_ERR
"Warning: could not find a valid RouterBOOT soft config\n");
88 rb2011_spi_partitions
[3].offset
= next
;
92 static struct mtd_partition rb2011_nand_partitions
[] = {
97 .mask_flags
= MTD_WRITEABLE
,
101 .offset
= (256 * 1024),
102 .size
= (4 * 1024 * 1024) - (256 * 1024),
106 .offset
= MTDPART_OFS_NXTBLK
,
107 .size
= MTDPART_SIZ_FULL
,
111 static struct flash_platform_data rb2011_spi_flash_data
= {
112 .parts
= rb2011_spi_partitions
,
113 .nr_parts
= ARRAY_SIZE(rb2011_spi_partitions
),
116 static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg
= {
117 .mode
= AR8327_PAD_MAC_RGMII
,
118 .txclk_delay_en
= true,
119 .rxclk_delay_en
= true,
120 .txclk_delay_sel
= AR8327_CLK_DELAY_SEL3
,
121 .rxclk_delay_sel
= AR8327_CLK_DELAY_SEL0
,
124 static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg
;
125 static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg
;
127 static struct ar8327_led_cfg rb2011_ar8327_led_cfg
= {
128 .led_ctrl0
= 0x0000c731,
129 .led_ctrl1
= 0x00000000,
130 .led_ctrl2
= 0x00000000,
131 .led_ctrl3
= 0x0030c300,
135 static struct ar8327_platform_data rb2011_ar8327_data
= {
136 .pad0_cfg
= &rb2011_ar8327_pad0_cfg
,
139 .speed
= AR8327_PORT_SPEED_1000
,
144 .led_cfg
= &rb2011_ar8327_led_cfg
,
147 static struct mdio_board_info rb2011_mdio0_info
[] = {
149 .bus_id
= "ag71xx-mdio.0",
151 .platform_data
= &rb2011_ar8327_data
,
155 static void __init
rb2011_wlan_init(void)
157 u8
*hard_cfg
= (u8
*) KSEG1ADDR(0x1f000000);
161 u8 wlan_mac
[ETH_ALEN
];
164 hard_cfg
+= rb2011_spi_partitions
[1].offset
;
165 err
= routerboot_find_tag(hard_cfg
, RB_HARD_CFG_SIZE
, RB_ID_WLAN_DATA
,
168 pr_err("no calibration data found\n");
172 art_buf
= kmalloc(RB_ART_SIZE
, GFP_KERNEL
);
173 if (art_buf
== NULL
) {
174 pr_err("no memory for calibration data\n");
178 err
= rle_decode((char *) tag
, tag_len
, art_buf
, RB_ART_SIZE
,
181 pr_err("unable to decode calibration data\n");
185 ath79_init_mac(wlan_mac
, ath79_mac_base
, 11);
186 ath79_register_wmac(art_buf
+ 0x1000, wlan_mac
);
192 static void rb2011_nand_select_chip(int chip_no
)
196 gpio_set_value(RB2011_GPIO_NAND_NCE
, 0);
199 gpio_set_value(RB2011_GPIO_NAND_NCE
, 1);
205 static struct nand_ecclayout rb2011_nand_ecclayout
= {
207 .eccpos
= { 8, 9, 10, 13, 14, 15 },
209 .oobfree
= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
212 static int rb2011_nand_scan_fixup(struct mtd_info
*mtd
)
214 struct nand_chip
*chip
= mtd
->priv
;
216 if (mtd
->writesize
== 512) {
218 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
219 * will not be able to find the kernel that we load.
221 chip
->ecc
.layout
= &rb2011_nand_ecclayout
;
227 static void __init
rb2011_nand_init(void)
229 gpio_request_one(RB2011_GPIO_NAND_NCE
, GPIOF_OUT_INIT_HIGH
, "NAND nCE");
231 ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup
);
232 ath79_nfc_set_parts(rb2011_nand_partitions
,
233 ARRAY_SIZE(rb2011_nand_partitions
));
234 ath79_nfc_set_select_chip(rb2011_nand_select_chip
);
235 ath79_nfc_set_swap_dma(true);
236 ath79_register_nfc();
239 static int rb2011_get_port_link(unsigned port
)
244 /* The Loss of signal line is active low */
245 return !gpio_get_value(RB2011_GPIO_SFP_LOS
);
248 static void __init
rb2011_sfp_init(void)
250 gpio_request_one(RB2011_GPIO_SFP_LOS
, GPIOF_IN
, "SFP LOS");
252 rb2011_ar8327_pad6_cfg
.mode
= AR8327_PAD_MAC_SGMII
;
254 rb2011_ar8327_data
.pad6_cfg
= &rb2011_ar8327_pad6_cfg
;
256 rb2011_ar8327_sgmii_cfg
.sgmii_ctrl
= 0xc70167d0;
257 rb2011_ar8327_sgmii_cfg
.serdes_aen
= true;
259 rb2011_ar8327_data
.sgmii_cfg
= &rb2011_ar8327_sgmii_cfg
;
261 rb2011_ar8327_data
.port6_cfg
.force_link
= 1;
262 rb2011_ar8327_data
.port6_cfg
.speed
= AR8327_PORT_SPEED_1000
;
263 rb2011_ar8327_data
.port6_cfg
.duplex
= 1;
265 rb2011_ar8327_data
.get_port_link
= rb2011_get_port_link
;
268 static void __init
rb2011_setup(void)
270 rb2011_init_partitions();
272 ath79_register_m25p80(&rb2011_spi_flash_data
);
275 ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0
|
276 AR934X_ETH_CFG_SW_ONLY_MODE
);
278 ath79_register_mdio(1, 0x0);
279 ath79_register_mdio(0, 0x0);
281 mdiobus_register_board_info(rb2011_mdio0_info
,
282 ARRAY_SIZE(rb2011_mdio0_info
));
284 /* GMAC0 is connected to an ar8327 switch */
285 ath79_init_mac(ath79_eth0_data
.mac_addr
, ath79_mac_base
, 0);
286 ath79_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RGMII
;
287 ath79_eth0_data
.phy_mask
= BIT(0);
288 ath79_eth0_data
.mii_bus_dev
= &ath79_mdio0_device
.dev
;
289 ath79_eth0_pll_data
.pll_1000
= 0x06000000;
291 ath79_register_eth(0);
293 /* GMAC1 is connected to the internal switch */
294 ath79_init_mac(ath79_eth1_data
.mac_addr
, ath79_mac_base
, 5);
295 ath79_eth1_data
.phy_if_mode
= PHY_INTERFACE_MODE_GMII
;
296 ath79_eth1_data
.speed
= SPEED_1000
;
297 ath79_eth1_data
.duplex
= DUPLEX_FULL
;
299 ath79_register_eth(1);
302 MIPS_MACHINE(ATH79_MACH_RB_2011L
, "2011L", "MikroTik RouterBOARD 2011L",
305 static void __init
rb2011us_setup(void)
310 ath79_register_usb();
313 MIPS_MACHINE(ATH79_MACH_RB_2011US
, "2011US", "MikroTik RouterBOARD 2011UAS",
316 static void __init
rb2011g_setup(void)
322 ath79_register_usb();
325 MIPS_MACHINE(ATH79_MACH_RB_2011G
, "2011G", "MikroTik RouterBOARD 2011UAS-2HnD",