ar71xx: add support for the Senao CAP4200AG board
[openwrt/svn-archive/archive.git] / target / linux / ar71xx / patches-3.3 / 611-MIPS-ath79-CAP4200AG-support.patch
1 --- a/arch/mips/ath79/Kconfig
2 +++ b/arch/mips/ath79/Kconfig
3 @@ -403,6 +403,16 @@ config ATH79_MACH_RW2458N
4 select ATH79_DEV_M25P80
5 select ATH79_DEV_USB
6
7 +config ATH79_MACH_CAP4200AG
8 + bool "Senao CAP4200AG support"
9 + select SOC_AR934X
10 + select ATH79_DEV_AP9X_PCI if PCI
11 + select ATH79_DEV_ETH
12 + select ATH79_DEV_GPIO_BUTTONS
13 + select ATH79_DEV_LEDS_GPIO
14 + select ATH79_DEV_M25P80
15 + select ATH79_DEV_WMAC
16 +
17 config ATH79_MACH_EAP7660D
18 bool "Senao EAP7660D support"
19 select SOC_AR71XX
20 --- a/arch/mips/ath79/machtypes.h
21 +++ b/arch/mips/ath79/machtypes.h
22 @@ -29,6 +29,7 @@ enum ath79_mach_type {
23 ATH79_MACH_AP83, /* Atheros AP83 */
24 ATH79_MACH_AP96, /* Atheros AP96 */
25 ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
26 + ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
27 ATH79_MACH_DB120, /* Atheros DB120 reference board */
28 ATH79_MACH_PB44, /* Atheros PB44 reference board */
29 ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
30 --- a/arch/mips/ath79/Makefile
31 +++ b/arch/mips/ath79/Makefile
32 @@ -49,6 +49,7 @@ obj-$(CONFIG_ATH79_MACH_AP81) += mach-a
33 obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
34 obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
35 obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
36 +obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
37 obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
38 obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
39 obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o