target/linux/ath79/dts/qca9531_comfast_cf-e313ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-e313ac", "qca,qca9531";
  10         model = "COMFAST CF-E313AC";
  11
  12         aliases {
  13                 serial0 = &uart;
  14                 led-boot = &led_rssihigh;
  15                 led-failsafe = &led_rssihigh;
  16                 led-upgrade = &led_rssihigh;
  17                 label-mac-device = &eth1;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22                 pinctrl-names = "default";
  23
  24                 wlan {
  25                         label = "green:wlan";
  26                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "phy0tpt";
  28                 };
  29
  30                 lan {
  31                         label = "green:lan";
  32                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wan {
  36                         label = "green:wan";
  37                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 rssilow {
  41                         label = "red:rssilow";
  42                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 rssimediumlow {
  46                         label = "red:rssimediumlow";
  47                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 rssimediumhigh {
  51                         label = "green:rssimediumhigh";
  52                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_rssihigh: rssihigh {
  56                         label = "green:rssihigh";
  57                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         keys {
  62                 compatible = "gpio-keys";
  63
  64                 reset {
  65                         label = "reset";
  66                         linux,code = <KEY_RESTART>;
  67                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  68                         debounce-interval = <60>;
  69                 };
  70         };
  71 };
  72
  73 &spi {
  74         status = "okay";
  75
  76         flash@0 {
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 spi-max-frequency = <25000000>;
  80
  81                 partitions {
  82                         compatible = "fixed-partitions";
  83                         #address-cells = <1>;
  84                         #size-cells = <1>;
  85
  86                         partition@0 {
  87                                 label = "u-boot";
  88                                 reg = <0x000000 0x010000>;
  89                                 read-only;
  90                         };
  91
  92                         art: partition@10000 {
  93                                 label = "art";
  94                                 reg = <0x010000 0x010000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@20000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                                 reg = <0x020000 0x7c0000>;
 102                         };
 103
 104                         partition@7e0000 {
 105                                 label = "config";
 106                                 reg = <0x7e0000 0x010000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@7f0000 {
 111                                 label = "nvram";
 112                                 reg = <0x7f0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &uart {
 120         status = "okay";
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125
 126         phy-handle = <&swphy0>;
 127
 128         mtd-mac-address = <&art 0x1002>;
 129
 130         gmac-config {
 131                 device = <&gmac>;
 132                 switch-phy-swap = <1>;
 133         };
 134 };
 135
 136 &eth1 {
 137         mtd-mac-address = <&art 0x0>;
 138 };
 139
 140 &pcie0 {
 141         status = "okay";
 142
 143         wifi@0,0 {
 144                 compatible = "qcom,ath10k";
 145                 reg = <0 0 0 0 0>;
 146         };
 147 };