target/linux/ath79/dts/qca9531_comfast_cf-e5.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "comfast,cf-e5", "qca,qca9531";
  10         model = "COMFAST CF-E5/E7";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys";
  18
  19                 reset {
  20                         label = "reset";
  21                         linux,code = <KEY_RESTART>;
  22                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         leds {
  27                 compatible = "gpio-leds";
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&jtag_disable_pins &led_wan_pin>;
  30
  31                 wan {
  32                         label = "blue:wan";
  33                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan {
  37                         label = "blue:lan";
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wlan {
  42                         label = "blue:wlan";
  43                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 rssi0 {
  48                         label = "blue:rssi0";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 rssi1 {
  53                         label = "blue:rssi1";
  54                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 rssi2 {
  58                         label = "blue:rssi2";
  59                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62 };
  63
  64 &uart {
  65         status = "okay";
  66 };
  67
  68 &usb0 {
  69         #address-cells = <1>;
  70         #size-cells = <0>;
  71         status = "okay";
  72
  73         hub_port: port@1 {
  74                 reg = <1>;
  75                 #trigger-source-cells = <0>;
  76         };
  77 };
  78
  79 &usb_phy {
  80         status = "okay";
  81 };
  82
  83 &spi {
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <25000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x000000 0x010000>;
  99                                 read-only;
 100                         };
 101
 102                         art: partition@10000 {
 103                                 label = "art";
 104                                 reg = <0x010000 0x010000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@20000 {
 109                                 compatible = "denx,uimage";
 110                                 label = "firmware";
 111                                 reg = <0x020000 0xfd0000>;
 112                         };
 113
 114                         partition@ff0000 {
 115                                 label = "art-backup";
 116                                 reg = <0xff0000 0x010000>;
 117                                 read-only;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125
 126         phy-handle = <&swphy4>;
 127
 128         mtd-mac-address = <&art 0x0>;
 129 };
 130
 131 &eth1 {
 132         mtd-mac-address = <&art 0x6>;
 133 };
 134
 135 &wmac {
 136         status = "okay";
 137
 138         mtd-cal-data = <&art 0x1000>;
 139 };
 140
 141 &pinmux {
 142         led_wan_pin: pinmux_led_wan_pin {
 143                 pinctrl-single,bits = <0x4 0x0 0xff>;
 144         };
 145 };