ath79: move dts-v1 statement to ath79.dtsi
[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9531_comfast_cf-ew72.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "qca953x.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "comfast,cf-ew72", "qca,qca9531";
10 model = "COMFAST CF-EW72";
11
12 aliases {
13 serial0 = &uart;
14 led-boot = &led_wan;
15 led-failsafe = &led_wan;
16 led-upgrade = &led_wan;
17 };
18
19 leds {
20 compatible = "gpio-leds";
21
22 pinctrl-names = "default";
23 pinctrl-0 = <&jtag_disable_pins>;
24
25 lan {
26 label = "cf-ew72:blue:lan";
27 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
28 };
29
30 led_wan: wan {
31 label = "cf-ew72:blue:wan";
32 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
33 };
34
35 wlan {
36 label = "cf-ew72:blue:wlan";
37 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
38 linux,default-trigger = "phy0tpt";
39 };
40 };
41
42 keys {
43 compatible = "gpio-keys";
44
45 reset {
46 label = "reset";
47 linux,code = <KEY_RESTART>;
48 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
49 debounce-interval = <60>;
50 };
51 };
52
53 watchdog {
54 compatible = "linux,wdt-gpio";
55
56 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
57 hw_algo = "toggle";
58 hw_margin_ms = <1200>;
59 always-running;
60 };
61 };
62
63 &pcie0 {
64 status = "okay";
65 };
66
67 &spi {
68 status = "okay";
69
70 num-cs = <1>;
71
72 flash@0 {
73 compatible = "winbond,w25q128", "jedec,spi-nor";
74 reg = <0>;
75 spi-max-frequency = <25000000>;
76
77 partitions {
78 compatible = "fixed-partitions";
79 #address-cells = <1>;
80 #size-cells = <1>;
81
82 partition@0 {
83 label = "u-boot";
84 reg = <0x000000 0x010000>;
85 read-only;
86 };
87
88 art: partition@10000 {
89 label = "art";
90 reg = <0x010000 0x010000>;
91 read-only;
92 };
93
94 partition@20000 {
95 compatible = "denx,uimage";
96 label = "firmware";
97 reg = <0x020000 0xfd0000>;
98 };
99
100 partition@ff0000 {
101 label = "nvram";
102 reg = <0xff0000 0x010000>;
103 read-only;
104 };
105 };
106 };
107 };
108
109 &uart {
110 status = "okay";
111 };
112
113 &eth0 {
114 status = "okay";
115
116 phy-handle = <&swphy4>;
117
118 mtd-mac-address = <&art 0x0>;
119 mtd-mac-address-increment = <1>;
120 };
121
122 &eth1 {
123 mtd-mac-address = <&art 0x0>;
124 };
125
126 &wmac {
127 status = "okay";
128
129 mtd-cal-data = <&art 0x1000>;
130 mtd-mac-address = <&art 0x0>;
131 mtd-mac-address-increment = <3>;
132 };