target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9533.dtsi"
   7
   8 / {
   9         compatible = "glinet,ar300m", "qca,qca9533";
  10         model = "GL.iNet GL-AR300M";
  11
  12         extosc: ref {
  13                 compatible = "fixed-clock";
  14                 #clock-cells = <0>;
  15                 clock-output-names = "ref";
  16                 clock-frequency = <25000000>;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23                 poll-interval = <20>;
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 button@0 {
  28                         label = "reset";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 button@1 {
  34                         label = "button right";
  35                         linux,code = <BTN_0>;
  36                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  37                 };
  38
  39                 button@3 {
  40                         label = "button left";
  41                         linux,code = <BTN_1>;
  42                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48
  49                 usb {
  50                         label = "gl-ar300m:green:usb";
  51                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  52                         trigger-sources = <&hub_port>;
  53                         linux,default-trigger = "usbport";
  54                 };
  55
  56                 wlan {
  57                         label = "gl-ar300m:green:wlan";
  58                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61
  62                 lan {
  63                         label = "gl-ar300m:green:lan";
  64                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 status {
  68                         label = "gl-ar300m:green:status";
  69                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72 };
  73
  74 &pcie0 {
  75         status = "okay";
  76 };
  77
  78 &uart {
  79         status = "okay";
  80 };
  81
  82 &usb0 {
  83         status = "okay";
  84
  85         hub_port: port@1 {
  86                 reg = <1>;
  87                 #trigger-soruce-cells = <0>;
  88         };
  89 };
  90
  91 &usb_phy {
  92         status = "okay";
  93 };
  94
  95 &pll {
  96         clocks = <&extosc>;
  97 };
  98
  99 &mdio0 {
 100         status = "okay";
 101
 102         phy4: ethernet-phy@4 {
 103                 reg = <4>;
 104                 phy-mode = "mii";
 105         };
 106 };
 107
 108 &mdio1 {
 109         status = "okay";
 110 };
 111
 112 &eth0 {
 113         status = "okay";
 114
 115         mtd-mac-address = <&art 0x0>;
 116         phy-handle = <&phy4>;
 117         phy-mode = "mii";
 118 };
 119
 120 &eth1 {
 121         status = "okay";
 122
 123         mtd-mac-address = <&art 0x6>;
 124         phy-mode = "gmii";
 125
 126         fixed-link {
 127                 speed = <1000>;
 128                 full-duplex;
 129         };
 130 };
 131
 132 &wmac {
 133         status = "okay";
 134         mtd-cal-data = <&art 0x1000>;
 135         mtd-mac-address = <&art 0x1002>;
 136 };