target/linux/ath79/dts/qca9558_ocedo_koala.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "ocedo,koala", "qca,qca9557";
  11         model = "OCEDO Koala";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-status = &system;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 power {
  25                         label = "koala:green:power";
  26                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 wifi2 {
  31                         label = "koala:yellow:wlan2";
  32                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy1tpt";
  34                         default-state = "off";
  35                 };
  36
  37                 wifi5 {
  38                         label = "koala:red:wlan58";
  39                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                         default-state = "off";
  42                 };
  43
  44                 system: system {
  45                         label = "koala:blue:sys";
  46                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  47                         default-state = "off";
  48                 };
  49         };
  50
  51         keys {
  52                 compatible = "gpio-keys-polled";
  53                 poll-interval = <100>;
  54
  55                 reset {
  56                         label = "reset";
  57                         linux,code = <KEY_RESTART>;
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &pcie0 {
  64         status = "okay";
  65 };
  66
  67 &uart {
  68         status = "okay";
  69 };
  70
  71 &pll {
  72         clocks = <&extosc>;
  73 };
  74
  75 &spi {
  76         status = "okay";
  77         num-cs = <1>;
  78
  79         flash@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         uboot: partition@0 {
  90                                 label = "u-boot";
  91                                 reg = <0x000000 0x040000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@40000 {
  96                                 label = "u-boot-env";
  97                                 reg = <0x040000 0x010000>;
  98                         };
  99
 100                         partition@50000 {
 101                                 label = "firmware";
 102                                 reg = <0x050000 0x740000>;
 103                         };
 104
 105                         partition@790000 {
 106                                 label = "vendor";
 107                                 reg = <0x790000 0x740000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@ed0000 {
 112                                 label = "data";
 113                                 reg = <0xed0000 0x110000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@fe0000 {
 118                                 label = "id";
 119                                 reg = <0xfe0000 0x010000>;
 120                                 read-only;
 121                         };
 122
 123                         art: partition@ff0000 {
 124                                 label = "art";
 125                                 reg = <0xff0000 0x010000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &wmac {
 133         status = "okay";
 134
 135         mtd-cal-data = <&art 0x1000>;
 136         mtd-mac-address = <&art 0x06>;
 137 };
 138
 139 &mdio0 {
 140         status = "okay";
 141
 142         phy5: ethernet-phy@5 {
 143                 reg = <5>;
 144                 phy-mode = "rgmii-rxid";
 145
 146                 at803x-disable-smarteee;
 147         };
 148 };
 149
 150 &eth0 {
 151         status = "okay";
 152
 153         mtd-mac-address = <&art 0x00>;
 154
 155         phy-handle = <&phy5>;
 156         phy-mode = "rgmii-rxid";
 157
 158         pll-data = <0xae000000 0xa0000101 0xa0001313>;
 159
 160         gmac-config {
 161                 device = <&gmac>;
 162
 163                 rxdv-delay = <3>;
 164                 rxd-delay = <3>;
 165                 txen-delay = <0>;
 166                 txd-delay = <0>;
 167                 rgmii-enabled = <1>;
 168         };
 169 };