target/linux/ath79/dts/qca9558_tplink_archer-d7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_system: system {
  24                         label = "tp-link:white:system";
  25                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wlan {
  30                         label = "tp-link:white:wlan";
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 lan {
  35                         label = "tp-link:white:lan";
  36                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 usb {
  40                         label = "tp-link:white:usb";
  41                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  42                         trigger-sources = <&hub_port1>, <&hub_port0>;
  43                         linux,default-trigger = "usbport";
  44                 };
  45
  46                 qss {
  47                         label = "tp-link:white:qss";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys";
  54
  55                 wifi {
  56                         label = "WiFi button";
  57                         linux,code = <KEY_RFKILL>;
  58                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wps {
  62                         label = "WPS button";
  63                         linux,code = <KEY_WPS_BUTTON>;
  64                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 reset {
  68                         label = "Reset button";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  71                 };
  72         };
  73
  74         reg_usb0_vbus: regulator {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "usb_vbus";
  77                 regulator-min-microvolt = <5000000>;
  78                 regulator-max-microvolt = <5000000>;
  79                 gpio = <&gpio 21 GPIO_ACTIVE_HIGH>;
  80                 enable-active-high;
  81         };
  82
  83         reg_usb1_vbus: regulator {
  84                 compatible = "regulator-fixed";
  85                 regulator-name = "usb_vbus";
  86                 regulator-min-microvolt = <5000000>;
  87                 regulator-max-microvolt = <5000000>;
  88                 gpio = <&gpio 22 GPIO_ACTIVE_HIGH>;
  89                 enable-active-high;
  90         };
  91 };
  92
  93 &mdio0 {
  94         status = "okay";
  95
  96         phy0: ethernet-phy@0 {
  97                 reg = <0>;
  98
  99                 qca,ar8327-initvals = <
 100                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 101                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 102                         0x50 0xc737c737 /* LED_CTRL0 */
 103                         0x54 0x00000000 /* LED_CTRL1 */
 104                         0x58 0x00000000 /* LED_CTRL2 */
 105                         0x5c 0x0030c300 /* LED_CTRL3 */
 106                         0x7c 0x0000007e /* PORT0_STATUS */
 107                         0x94 0x0000007e /* PORT6 STATUS */
 108                         >;
 109         };
 110 };
 111
 112 &eth0 {
 113         status = "okay";
 114
 115         phy-handle = <&phy0>;
 116         pll-data = <0x56000000 0x00000101 0x00001616>;
 117
 118         gmac-config {
 119                 device = <&gmac>;
 120                 rgmii-enabled = <1>;
 121         };
 122 };
 123
 124 &eth1 {
 125         status = "okay";
 126
 127         pll-data = <0x03000101 0x00000101 0x00001616>;
 128
 129         fixed-link {
 130                 speed = <1000>;
 131                 full-duplex;
 132         };
 133 };
 134
 135 &wmac {
 136         status = "okay";
 137 };
 138
 139 &pcie1 {
 140         status = "okay";
 141 };
 142
 143 &uart {
 144         status = "okay";
 145 };
 146
 147 &usb_phy0 {
 148         status = "okay";
 149 };
 150
 151 &usb0 {
 152         #address-cells = <1>;
 153         #size-cells = <0>;
 154         dr_mode = "host";
 155         vbus-supply = <&reg_usb0_vbus>;
 156         status = "okay";
 157
 158         hub_port0: port@1 {
 159                 reg = <1>;
 160                 #trigger-source-cells = <0>;
 161         };
 162 };
 163
 164 &usb_phy1 {
 165         status = "okay";
 166 };
 167
 168 &usb1 {
 169         #address-cells = <1>;
 170         #size-cells = <0>;
 171         dr_mode = "host";
 172         vbus-supply = <&reg_usb1_vbus>;
 173         status = "okay";
 174
 175         hub_port1: port@1 {
 176                 reg = <1>;
 177                 #trigger-source-cells = <0>;
 178         };
 179 };