target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         model = "TP-Link RE350K v1";
  11         compatible = "tplink,re350k-v1", "qca,qca9558";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 mdio-gpio0 = &mdio2;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         keys {
  26                 compatible = "gpio-keys";
  27
  28                 app-config {
  29                         label = "app-config";
  30                         linux,code = <BTN_0>;
  31                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 led {
  36                         label = "led";
  37                         linux,code = <BTN_1>;
  38                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41
  42                 reset {
  43                         label = "reset";
  44                         linux,code = <KEY_RESTART>;
  45                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  46                         debounce-interval = <60>;
  47                 };
  48         };
  49
  50         leds {
  51                 compatible = "gpio-leds";
  52
  53                 led_power: power {
  54                         label = "tp-link:green:power";
  55                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  56                         default-state = "on";
  57                 };
  58
  59                 wlan2g_green {
  60                         label = "tp-link:green:wlan2g";
  61                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  62                         linux,default-trigger = "phy1tpt";
  63                 };
  64
  65                 wlan2g_red {
  66                         label = "tp-link:red:wlan2g";
  67                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wlan5g_green {
  71                         label = "tp-link:green:wlan5g";
  72                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75
  76                 wlan5g_red {
  77                         label = "tp-link:red:wlan5g";
  78                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  79                 };
  80         };
  81
  82         mdio2: mdio {
  83                 compatible = "virtual,mdio-gpio";
  84
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87
  88                 gpios = <&gpio 23 GPIO_ACTIVE_HIGH>,
  89                         <&gpio 18 GPIO_ACTIVE_HIGH>;
  90
  91                 phy4: ethernet-phy@4 {
  92                         reg = <4>;
  93
  94                         phy-mode = "rgmii-rxid";
  95                         eee-broken-100tx;
  96                         eee-broken-1000t;
  97                 };
  98         };
  99 };
 100
 101 &eth0 {
 102         status = "okay";
 103
 104         phy-handle = <&phy4>;
 105         pll-data = <0x9e000000 0x80000101 0x80001313>;
 106
 107         mtd-mac-address = <&config 0x10008>;
 108
 109         gmac-config {
 110                 device = <&gmac>;
 111
 112                 rxdv-delay = <2>;
 113                 rxd-delay = <2>;
 114                 txen-delay = <0>;
 115                 txd-delay = <0>;
 116                 rgmii-enabled = <1>;
 117         };
 118 };
 119
 120 &pcie0 {
 121         status = "okay";
 122 };
 123
 124 &spi {
 125         status = "okay";
 126
 127         num-cs = <1>;
 128
 129         flash@0 {
 130                 compatible = "jedec,spi-nor";
 131                 reg = <0>;
 132                 spi-max-frequency = <25000000>;
 133
 134                 partitions {
 135                         compatible = "fixed-partitions";
 136                         #address-cells = <1>;
 137                         #size-cells = <1>;
 138
 139                         partition@0 {
 140                                 label = "u-boot";
 141                                 reg = <0x000000 0x020000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@20000 {
 146                                 compatible = "tplink,firmware";
 147                                 label = "firmware";
 148                                 reg = <0x020000 0xd70000>;
 149                         };
 150
 151                         config: partition@d90000 {
 152                                 label = "config";
 153                                 reg = <0xd90000 0x260000>;
 154                                 read-only;
 155                         };
 156
 157                         art: partition@ff0000 {
 158                                 label = "art";
 159                                 reg = <0xff0000 0x010000>;
 160                                 read-only;
 161                         };
 162                 };
 163         };
 164 };
 165
 166 &uart {
 167         status = "okay";
 168 };
 169
 170 &wmac {
 171         status = "okay";
 172
 173         mtd-cal-data = <&art 0x1000>;
 174         mtd-mac-address = <&config 0x10008>;
 175 };