target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_tplink_eap2x5-1port.dtsi"
   4
   5 / {
   6         compatible = "tplink,eap225-v3", "qca,qca9563";
   7         model = "TP-Link EAP225 v3";
   8
   9         aliases {
  10                 led-boot = &led_status_green;
  11                 led-failsafe = &led_status_amber;
  12                 led-running = &led_status_green;
  13                 led-upgrade = &led_status_amber;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_status_green: status_green {
  20                         label = "green:status";
  21                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  22                         default-state = "on";
  23                 };
  24
  25                 led_status_amber: status_amber {
  26                         label = "amber:status";
  27                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  28                 };
  29         };
  30 };
  31
  32 &art {
  33         nvmem-layout {
  34                 compatible = "fixed-layout";
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37
  38                 macaddr_info_8: macaddr@8 {
  39                         compatible = "mac-base";
  40                         reg = <0x8 0x6>;
  41                         #nvmem-cell-cells = <1>;
  42                 };
  43
  44                 precalibration_ath10k: pre-calibration@5000 {
  45                         reg = <0x5000 0x2f20>;
  46                 };
  47         };
  48 };
  49
  50 &eth0 {
  51         phy-handle = <&phy4>;
  52         phy-mode = "sgmii";
  53 };
  54
  55 &mdio0 {
  56         phy4: ethernet-phy@4 {
  57                 reg = <4>;
  58                 reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  59         };
  60 };
  61
  62 &pcie {
  63         wifi@0,0 {
  64                 compatible = "qcom,ath10k";
  65                 reg = <0 0 0 0 0>;
  66
  67                 nvmem-cells = <&macaddr_info_8 1>, <&precalibration_ath10k>;
  68                 nvmem-cell-names = "mac-address", "pre-calibration";
  69         };
  70 };