target/linux/ath79/dts/tp9343_tplink_tl-wr94x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 label-mac-device = &wmac;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 wifi {
  21                         label = "WiFi button";
  22                         linux,code = <KEY_RFKILL>;
  23                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 reset {
  27                         label = "Reset button";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32 };
  33
  34 &spi {
  35         status = "okay";
  36         num-cs = <1>;
  37
  38         flash@0 {
  39                 compatible = "jedec,spi-nor";
  40                 reg = <0>;
  41                 spi-max-frequency = <25000000>;
  42
  43                 partitions {
  44                         compatible = "fixed-partitions";
  45                         #address-cells = <1>;
  46                         #size-cells = <1>;
  47
  48                         uboot:  partition@0 {
  49                                 label = "u-boot";
  50                                 reg = <0x000000 0x020000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@20000 {
  55                                 compatible = "tplink,firmware";
  56                                 label = "firmware";
  57                                 reg = <0x020000 0x3d0000>;
  58                         };
  59
  60                         art: partition@3f0000 {
  61                                 label = "art";
  62                                 reg = <0x3f0000 0x010000>;
  63                                 read-only;
  64                         };
  65                 };
  66         };
  67 };
  68
  69 &uart {
  70         status = "okay";
  71 };
  72
  73 &eth0 {
  74         status = "okay";
  75
  76         phy-handle = <&swphy4>;
  77
  78         mtd-mac-address = <&uboot 0x1fc00>;
  79         mtd-mac-address-increment = <1>;
  80 };
  81
  82 &eth1 {
  83         status = "okay";
  84 };
  85
  86 &wmac {
  87         status = "okay";
  88
  89         mtd-cal-data = <&art 0x1000>;
  90         mtd-mac-address = <&uboot 0x1fc00>;
  91 };