4 compatible = "brcm,bcm6318";
16 compatible = "brcm,bmips3300", "mips,mips4Kc";
22 cpu_intc: interrupt-controller {
24 compatible = "mti,cpu-interrupt-controller";
27 #interrupt-cells = <1>;
30 memory { device_type = "memory"; reg = <0 0>; };
36 compatible = "simple-bus";
37 interrupt-parent = <&periph_intc>;
39 ext_intc: interrupt-controller@10000018 {
40 compatible = "brcm,bcm6318-ext-intc";
41 reg = <0x10000018 0x4>;
44 #interrupt-cells = <2>;
46 interrupts = <24>, <25>, <26>, <27>;
49 periph_intc: interrupt-controller@10000020 {
50 compatible = "brcm,bcm6345-l1-intc";
51 reg = <0x10000020 0x20>;
54 #interrupt-cells = <1>;
56 interrupt-parent = <&cpu_intc>;
60 pinctrl: pin-controller@10000080 {
61 compatible = "brcm,bcm6318-pinctrl";
62 reg = <0x10000080 0x08>,
67 reg-names = "dirout", "dat", "mode", "mux", "pad";
72 interrupt-parent = <&ext_intc>;
73 interrupts = <0 0>, <1 0>;
74 interrupt-names = "gpio33", "gpio34";
76 pinctrl_ephy0_spd_led: ephy0_spd_led {
77 function = "ephy0_spd_led";
81 pinctrl_ephy1_spd_led: ephy1_spd_led {
82 function = "ephy1_spd_led";
86 pinctrl_ephy2_spd_led: ephy2_spd_led {
87 function = "ephy2_spd_led";
91 pinctrl_ephy3_spd_led: ephy3_spd_led {
92 function = "ephy3_spd_led";
96 pinctrl_ephy0_act_led: ephy0_act_led {
97 function = "ephy0_act_led";
101 pinctrl_ephy1_act_led: ephy1_act_led {
102 function = "ephy1_act_led";
106 pinctrl_ephy2_act_led: ephy2_act_led {
107 function = "ephy2_act_led";
111 pinctrl_ephy3_act_led: ephy3_act_led {
112 function = "ephy3_act_led";
116 pinctrl_serial_led: serial_led {
117 pinctrl_serial_led_data: serial_led_data {
118 function = "serial_led_data";
122 pinctrl_serial_led_clk: serial_led_clk {
123 function = "serial_led_clk";
128 pinctrl_inet_act_led: inet_act_led {
129 function = "inet_act_led";
133 pinctrl_inet_fail_led: inet_fail_led {
134 function = "inet_fail_led";
138 pinctrl_dsl_led: dsl_led {
139 function = "dsl_led";
143 pinctrl_post_fail_led: post_fail_led {
144 function = "post_fail_led";
148 pinctrl_wlan_wps_led: wlan_wps_led {
149 function = "wlan_wps_led";
153 pinctrl_usb_pwron: usb_pwron {
154 function = "usb_pwron";
158 pinctrl_usb_device_led: usb_device_led {
159 function = "usb_device_led";
163 pinctrl_usb_active: usb_active {
164 function = "usb_active";
169 hsspi: spi@10003000 {
170 #address-cells = <1>;
172 compatible = "brcm,bcm6328-hsspi";
173 reg = <0x10003000 0x600>;
175 /* clocks = <&clkctl 25>; */