target/linux/brcm63xx/patches-3.18/510-board_spw303v.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -1574,6 +1574,72 @@ static struct board_info __initdata boar
   4                 .pci_dev                        = 1,
   5         },
   6  };
   7 +
   8 + /* T-Home Speedport W 303V Typ B */
   9 +static struct board_info __initdata board_spw303v = {
  10 +       .name                   = "96358-502V",
  11 +       .expected_cpu_id        = 0x6358,
  12 +
  13 +       .has_uart0              = 1,
  14 +       .has_enet0              = 1,
  15 +       .has_pci                = 1,
  16 +
  17 +       .enet0 = {
  18 +               .has_phy                = 1,
  19 +               .use_internal_phy       = 1,
  20 +       },
  21 +
  22 +       .leds = {
  23 +               {
  24 +                       .name           = "spw303v:green:power+adsl",
  25 +                       .gpio           = 22,
  26 +                       .active_low     = 1,
  27 +               },
  28 +               {
  29 +                       .name           = "spw303v:red:power+adsl",
  30 +                       .gpio           = 2,
  31 +                       .active_low     = 1,
  32 +               },
  33 +               {
  34 +                       .name           = "spw303v:green:ppp",
  35 +                       .gpio           = 5,
  36 +                       .active_low     = 1,
  37 +               },
  38 +               {
  39 +                       .name           = "spw303v:green:ses",
  40 +                       .gpio           = 0,
  41 +                       .active_low     = 1,
  42 +               },
  43 +               {
  44 +                       .name           = "spw303v:green:voip",
  45 +                       .gpio           = 27,
  46 +                       .active_low     = 1,
  47 +               },
  48 +               {
  49 +                       .name           = "spw303v:green:pots",
  50 +                       .gpio           = 31,
  51 +                       .active_low     = 1,
  52 +               },
  53 +       },
  54 +
  55 +       .buttons = {
  56 +               {
  57 +                       .desc           = "reset",
  58 +                       .gpio           = 11,
  59 +                       .type           = EV_KEY,
  60 +                       .code           = KEY_RESTART,
  61 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  62 +               },
  63 +               {
  64 +                       .desc           = "ses",
  65 +                       .gpio           = 37,
  66 +                       .active_low     = 1,
  67 +                       .type           = EV_KEY,
  68 +                       .code           = KEY_WPS_BUTTON,
  69 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  70 +               },
  71 +       }
  72 +};
  73  #endif /* CONFIG_BCM63XX_CPU_6358 */
  74
  75  /*
  76 @@ -1621,6 +1687,7 @@ static const struct board_info __initcon
  77         &board_nb4_ser_r0,
  78         &board_nb4_fxc_r1,
  79         &board_HW553,
  80 +       &board_spw303v,
  81  #endif
  82  };
  83
  84 @@ -1669,6 +1736,7 @@ static struct of_device_id const bcm963x
  85         { .compatible = "pirelli,agpf-s0", .data = &board_AGPFS0, },
  86         { .compatible = "sfr,nb4-ser-r0", .data = &board_nb4_ser_r0, },
  87         { .compatible = "sfr,nb4-fxc-r1", .data = &board_nb4_fxc_r1, },
  88 +       { .compatible = "t-com,spw303v", .data = &board_spw303v, },
  89         { .compatible = "telsey,cpva642", .data = &board_CPVA642, },
  90  #endif
  91  #ifdef CONFIG_BCM63XX_CPU_6368