target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21 #include <dt-bindings/soc/qcom,tcsr.h>
  22
  23 / {
  24         model = "AVM FRITZ!Box 4040";
  25         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  26
  27         aliases {
  28                 led-boot = &power;
  29                 led-failsafe = &flash;
  30                 led-running = &power;
  31                 led-upgrade = &flash;
  32         };
  33
  34         reserved-memory {
  35                 #address-cells = <0x1>;
  36                 #size-cells = <0x1>;
  37                 ranges;
  38
  39                 smem@87e00000 {
  40                         reg = <0x87e00000 0x080000>;
  41                         no-map;
  42                 };
  43
  44                 tz@87e80000 {
  45                         reg = <0x87e80000 0x180000>;
  46                         no-map;
  47                 };
  48         };
  49
  50         soc {
  51                 mdio@90000 {
  52                         status = "okay";
  53                 };
  54
  55                 ess-psgmii@98000 {
  56                         status = "okay";
  57                 };
  58
  59                 tcsr@1949000 {
  60                         compatible = "qcom,tcsr";
  61                         reg = <0x1949000 0x100>;
  62                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  63                 };
  64
  65                 tcsr@194b000 {
  66                         compatible = "qcom,tcsr";
  67                         reg = <0x194b000 0x100>;
  68                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  69                 };
  70
  71                 ess_tcsr@1953000 {
  72                         compatible = "qcom,tcsr";
  73                         reg = <0x1953000 0x1000>;
  74                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  75                 };
  76
  77                 tcsr@1957000 {
  78                         compatible = "qcom,tcsr";
  79                         reg = <0x1957000 0x100>;
  80                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  81                 };
  82
  83                 usb2@60f8800 {
  84                         status = "okay";
  85                 };
  86
  87                 serial@78af000 {
  88                         pinctrl-0 = <&serial_pins>;
  89                         pinctrl-names = "default";
  90                         status = "okay";
  91                 };
  92
  93                 usb3@8af8800 {
  94                         status = "okay";
  95                 };
  96
  97                 crypto@8e3a000 {
  98                         status = "okay";
  99                 };
 100
 101                 wifi@a000000 {
 102                         status = "okay";
 103                 };
 104
 105                 wifi@a800000 {
 106                         status = "okay";
 107                 };
 108
 109                 watchdog@b017000 {
 110                         status = "okay";
 111                 };
 112
 113                 qca8075: ess-switch@c000000 {
 114                         status = "okay";
 115
 116                         #gpio-cells = <2>;
 117                         gpio-controller;
 118
 119                         enable-usb-power {
 120                                 gpio-hog;
 121                                 line-name = "enable USB3 power";
 122                                 gpios = <7 GPIO_ACTIVE_HIGH>;
 123                                 output-high;
 124                         };
 125                 };
 126
 127                 edma@c080000 {
 128                         status = "okay";
 129                 };
 130         };
 131
 132         gpio-keys {
 133                 compatible = "gpio-keys";
 134
 135                 wlan {
 136                         label = "wlan";
 137                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_RFKILL>;
 139                 };
 140
 141                 wps {
 142                         label = "wps";
 143                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 144                         linux,code = <KEY_WPS_BUTTON>;
 145                 };
 146         };
 147
 148         gpio-leds {
 149                 compatible = "gpio-leds";
 150
 151                 wlan {
 152                         label = "fritz4040:green:wlan";
 153                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 154                 };
 155
 156                 panic: info_red {
 157                         label = "fritz4040:red:info";
 158                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 159                         panic-indicator;
 160                 };
 161
 162                 wan {
 163                         label = "fritz4040:green:wan";
 164                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 165                 };
 166
 167                 power: power {
 168                         label = "fritz4040:green:power";
 169                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 170                 };
 171
 172                 lan {
 173                         label = "fritz4040:green:lan";
 174                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 175                 };
 176
 177                 flash: info_amber {
 178                         label = "fritz4040:amber:info";
 179                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 180                 };
 181         };
 182 };
 183
 184 &tlmm {
 185         serial_pins: serial_pinmux {
 186                 mux {
 187                         pins = "gpio60", "gpio61";
 188                         function = "blsp_uart0";
 189                         bias-disable;
 190                 };
 191         };
 192
 193         spi_0_pins: spi_0_pinmux {
 194                 mux {
 195                         function = "blsp_spi0";
 196                         pins = "gpio55", "gpio56", "gpio57";
 197                         drive-strength = <12>;
 198                         bias-disable;
 199                 };
 200
 201                 mux_cs {
 202                         function = "gpio";
 203                         pins = "gpio54";
 204                         drive-strength = <2>;
 205                         bias-disable;
 206                         output-high;
 207                 };
 208         };
 209 };
 210
 211 &cryptobam {
 212         status = "okay";
 213 };
 214
 215 &blsp_dma {
 216         status = "okay";
 217 };
 218
 219 &spi_0 { /* BLSP1 QUP1 */
 220         pinctrl-0 = <&spi_0_pins>;
 221         pinctrl-names = "default";
 222         status = "okay";
 223         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 224
 225         mx25l25635f@0 {
 226                 compatible = "jedec,spi-nor";
 227                 #address-cells = <1>;
 228                 #size-cells = <0>;
 229                 reg = <0>;
 230                 spi-max-frequency = <24000000>;
 231                 status = "okay";
 232                 m25p,fast-read;
 233
 234                 partitions {
 235                         compatible = "fixed-partitions";
 236                         #address-cells = <1>;
 237                         #size-cells = <1>;
 238
 239                         partition0@0 {
 240                                 label = "SBL1";
 241                                 reg = <0x00000000 0x00040000>;
 242                                 read-only;
 243                         };
 244                         partition1@40000 {
 245                                 label = "MIBIB";
 246                                 reg = <0x00040000 0x00020000>;
 247                                 read-only;
 248                         };
 249                         partition2@60000 {
 250                                 label = "QSEE";
 251                                 reg = <0x00060000 0x00060000>;
 252                                 read-only;
 253                         };
 254                         partition3@c0000 {
 255                                 label = "CDT";
 256                                 reg = <0x000c0000 0x00010000>;
 257                                 read-only;
 258                         };
 259                         partition4@d0000 {
 260                                 label = "DDRPARAMS";
 261                                 reg = <0x000d0000 0x00010000>;
 262                                 read-only;
 263                         };
 264                         partition5@e0000 {
 265                                 label = "APPSBLENV"; /* uboot env - empty */
 266                                 reg = <0x000e0000 0x00010000>;
 267                                 read-only;
 268                         };
 269                         partition6@f0000 {
 270                                 label = "urlader"; /* APPSBL */
 271                                 reg = <0x000f0000 0x0002dc000>;
 272                                 read-only;
 273                         };
 274                         partition7@11dc00 {
 275                                 /* make a backup of this partition! */
 276                                 label = "urlader_config";
 277                                 reg = <0x0011dc00 0x00002400>;
 278                                 read-only;
 279                         };
 280                         partition8@120000 {
 281                                 label = "tffs1";
 282                                 reg = <0x00120000 0x00080000>;
 283                                 read-only;
 284                         };
 285                         partition9@1a0000 {
 286                                 label = "tffs2";
 287                                 reg = <0x001a0000 0x00080000>;
 288                                 read-only;
 289                         };
 290                         partition10@220000 {
 291                                 label = "uboot";
 292                                 reg = <0x00220000 0x00080000>;
 293                                 read-only;
 294                         };
 295                         partition11@2A0000 {
 296                                 label = "firmware";
 297                                 reg = <0x002a0000 0x01c60000>;
 298                         };
 299                         partition12@1f00000 {
 300                                 label = "jffs2";
 301                                 reg = <0x01f00000 0x00100000>;
 302                         };
 303                 };
 304         };
 305 };
 306
 307 &usb3_ss_phy {
 308         status = "okay";
 309 };
 310
 311 &usb3_hs_phy {
 312         status = "okay";
 313 };
 314
 315 &usb2_hs_phy {
 316         status = "okay";
 317 };