target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Box 4040";
  10         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  11
  12         aliases {
  13                 led-boot = &power;
  14                 led-failsafe = &flash;
  15                 led-running = &power;
  16                 led-upgrade = &flash;
  17         };
  18
  19         soc {
  20                 mdio@90000 {
  21                         status = "okay";
  22                 };
  23
  24                 ess-psgmii@98000 {
  25                         status = "okay";
  26                 };
  27
  28                 tcsr@1949000 {
  29                         compatible = "qcom,tcsr";
  30                         reg = <0x1949000 0x100>;
  31                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  32                 };
  33
  34                 tcsr@194b000 {
  35                         compatible = "qcom,tcsr";
  36                         reg = <0x194b000 0x100>;
  37                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  38                 };
  39
  40                 ess_tcsr@1953000 {
  41                         compatible = "qcom,tcsr";
  42                         reg = <0x1953000 0x1000>;
  43                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  44                 };
  45
  46                 tcsr@1957000 {
  47                         compatible = "qcom,tcsr";
  48                         reg = <0x1957000 0x100>;
  49                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  50                 };
  51
  52                 usb2@60f8800 {
  53                         status = "okay";
  54                 };
  55
  56                 usb3@8af8800 {
  57                         status = "okay";
  58                 };
  59
  60                 crypto@8e3a000 {
  61                         status = "okay";
  62                 };
  63
  64                 watchdog@b017000 {
  65                         status = "okay";
  66                 };
  67
  68                 qca8075: ess-switch@c000000 {
  69                         status = "okay";
  70
  71                         #gpio-cells = <2>;
  72                         gpio-controller;
  73
  74                         enable-usb-power {
  75                                 gpio-hog;
  76                                 line-name = "enable USB3 power";
  77                                 gpios = <7 GPIO_ACTIVE_HIGH>;
  78                                 output-high;
  79                         };
  80                 };
  81
  82                 edma@c080000 {
  83                         status = "okay";
  84                 };
  85         };
  86
  87         keys {
  88                 compatible = "gpio-keys";
  89
  90                 wlan {
  91                         label = "wlan";
  92                         gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_RFKILL>;
  94                 };
  95
  96                 wps {
  97                         label = "wps";
  98                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  99                         linux,code = <KEY_WPS_BUTTON>;
 100                 };
 101         };
 102
 103         switch-leds {
 104                 compatible = "gpio-leds";
 105
 106                 wlan {
 107                         label = "fritz4040:green:wlan";
 108                         gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
 109                 };
 110
 111                 panic: info_red {
 112                         label = "fritz4040:red:info";
 113                         gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
 114                         panic-indicator;
 115                 };
 116
 117                 wan {
 118                         label = "fritz4040:green:wan";
 119                         gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
 120                 };
 121
 122                 power: power {
 123                         label = "fritz4040:green:power";
 124                         gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
 125                 };
 126
 127                 lan {
 128                         label = "fritz4040:green:lan";
 129                         gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 flash: info_amber {
 133                         label = "fritz4040:amber:info";
 134                         gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
 135                 };
 136         };
 137 };
 138
 139 &tlmm {
 140         serial_pins: serial_pinmux {
 141                 mux {
 142                         pins = "gpio60", "gpio61";
 143                         function = "blsp_uart0";
 144                         bias-disable;
 145                 };
 146         };
 147
 148         spi_0_pins: spi_0_pinmux {
 149                 mux {
 150                         function = "blsp_spi0";
 151                         pins = "gpio55", "gpio56", "gpio57";
 152                         drive-strength = <12>;
 153                         bias-disable;
 154                 };
 155
 156                 mux_cs {
 157                         function = "gpio";
 158                         pins = "gpio54";
 159                         drive-strength = <2>;
 160                         bias-disable;
 161                         output-high;
 162                 };
 163         };
 164 };
 165
 166 &cryptobam {
 167         status = "okay";
 168 };
 169
 170 &blsp_dma {
 171         status = "okay";
 172 };
 173
 174 &blsp1_spi1 { /* BLSP1 QUP1 */
 175         pinctrl-0 = <&spi_0_pins>;
 176         pinctrl-names = "default";
 177         status = "okay";
 178         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 179
 180         flash@0 {
 181                 compatible = "jedec,spi-nor";
 182                 reg = <0>;
 183                 spi-max-frequency = <24000000>;
 184                 status = "okay";
 185                 m25p,fast-read;
 186
 187                 partitions {
 188                         compatible = "fixed-partitions";
 189                         #address-cells = <1>;
 190                         #size-cells = <1>;
 191
 192                         partition0@0 {
 193                                 label = "SBL1";
 194                                 reg = <0x00000000 0x00040000>;
 195                                 read-only;
 196                         };
 197                         partition1@40000 {
 198                                 label = "MIBIB";
 199                                 reg = <0x00040000 0x00020000>;
 200                                 read-only;
 201                         };
 202                         partition2@60000 {
 203                                 label = "QSEE";
 204                                 reg = <0x00060000 0x00060000>;
 205                                 read-only;
 206                         };
 207                         partition3@c0000 {
 208                                 label = "CDT";
 209                                 reg = <0x000c0000 0x00010000>;
 210                                 read-only;
 211                         };
 212                         partition4@d0000 {
 213                                 label = "DDRPARAMS";
 214                                 reg = <0x000d0000 0x00010000>;
 215                                 read-only;
 216                         };
 217                         partition5@e0000 {
 218                                 label = "APPSBLENV"; /* uboot env - empty */
 219                                 reg = <0x000e0000 0x00010000>;
 220                                 read-only;
 221                         };
 222                         partition6@f0000 {
 223                                 label = "urlader"; /* APPSBL */
 224                                 reg = <0x000f0000 0x0002dc000>;
 225                                 read-only;
 226                         };
 227                         partition7@11dc00 {
 228                                 /* make a backup of this partition! */
 229                                 label = "urlader_config";
 230                                 reg = <0x0011dc00 0x00002400>;
 231                                 read-only;
 232                         };
 233                         partition8@120000 {
 234                                 label = "tffs1";
 235                                 reg = <0x00120000 0x00080000>;
 236                                 read-only;
 237                         };
 238                         partition9@1a0000 {
 239                                 label = "tffs2";
 240                                 reg = <0x001a0000 0x00080000>;
 241                                 read-only;
 242                         };
 243                         partition10@220000 {
 244                                 label = "uboot";
 245                                 reg = <0x00220000 0x00080000>;
 246                                 read-only;
 247                         };
 248                         partition11@2A0000 {
 249                                 compatible = "denx,fit";
 250                                 label = "firmware";
 251                                 reg = <0x002a0000 0x01c60000>;
 252                         };
 253                         partition12@1f00000 {
 254                                 label = "jffs2";
 255                                 reg = <0x01f00000 0x00100000>;
 256                         };
 257                 };
 258         };
 259 };
 260
 261 &blsp1_uart1 {
 262         pinctrl-0 = <&serial_pins>;
 263         pinctrl-names = "default";
 264         status = "okay";
 265 };
 266
 267 &usb3_ss_phy {
 268         status = "okay";
 269 };
 270
 271 &usb3_hs_phy {
 272         status = "okay";
 273 };
 274
 275 &usb2_hs_phy {
 276         status = "okay";
 277 };
 278
 279 &wifi0 {
 280         status = "okay";
 281         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 282 };
 283
 284 &wifi1 {
 285         status = "okay";
 286         qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
 287 };