target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   5 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   6 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   7
   8 define Device/Default
   9         PROFILES := Default
  10         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  11         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
  12         KERNEL_PREFIX := $$(IMAGE_PREFIX)
  13         KERNEL_LOADADDR := 0x80208000
  14         DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
  15         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  16         IMAGES := sysupgrade.bin
  17         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  18         IMAGE/sysupgrade.bin/squashfs :=
  19 endef
  20
  21 define Device/FitImage
  22         KERNEL_SUFFIX := -fit-uImage.itb
  23         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  24         KERNEL_NAME := Image
  25 endef
  26
  27 define Device/FitImageLzma
  28         KERNEL_SUFFIX := -fit-uImage.itb
  29         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  30         KERNEL_NAME := Image
  31 endef
  32
  33 define Device/FitzImage
  34         KERNEL_SUFFIX := -fit-zImage.itb
  35         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  36         KERNEL_NAME := zImage
  37 endef
  38
  39 define Device/UbiFit
  40         KERNEL_IN_UBI := 1
  41         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  42         IMAGE/nand-factory.ubi := append-ubi
  43         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  44 endef
  45
  46 define Device/DniImage
  47         $(call Device/FitzImage)
  48         NETGEAR_BOARD_ID :=
  49         NETGEAR_HW_ID :=
  50         IMAGES += factory.img
  51         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  52         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  53                 append-rootfs | pad-rootfs | append-metadata | check-size
  54 endef
  55
  56 define Build/append-rootfshdr
  57         mkimage -A $(LINUX_KARCH) \
  58                 -O linux -T filesystem \
  59                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  60                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  61         dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
  62 endef
  63
  64 define Build/mkmylofw_32m
  65         $(eval device_id=$(word 1,$(1)))
  66         $(eval revision=$(word 2,$(1)))
  67
  68         let \
  69                 size="$$(stat -c%s $@)" \
  70                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  71                 pad="(pad - (size % pad)) % pad" \
  72                 newsize='size + pad'; \
  73                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  74                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  75                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  76                 $@.new
  77         @mv $@.new $@
  78 endef
  79
  80 define Build/qsdk-ipq-factory-nand-askey
  81         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  82                 askey_kernel $(IMAGE_KERNEL) \
  83                 askey_fs $(IMAGE_ROOTFS) \
  84                 ubifs $@
  85         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  86         @mv $@.new $@
  87 endef
  88
  89 define Build/SenaoFW
  90         -$(STAGING_DIR_HOST)/bin/mksenaofw \
  91                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
  92                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
  93                 -e $@ \
  94                 -o $@.new
  95         @cp $@.new $@
  96 endef
  97
  98 define Build/wrgg-image
  99         mkwrggimg -i $@ \
 100         -o $@.new \
 101         -d "$(WRGG_DEVNAME)" \
 102         -s "$(WRGG_SIGNATURE)" \
 103         -v "" -m "" -B ""
 104         mv $@.new $@
 105 endef
 106
 107 define Device/8dev_habanero-dvk
 108         $(call Device/FitImageLzma)
 109         DEVICE_VENDOR := 8devices
 110         DEVICE_MODEL := Habanero DVK
 111         IMAGE_SIZE := 30976k
 112         SOC := qcom-ipq4019
 113         DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
 114         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
 115 endef
 116 TARGET_DEVICES += 8dev_habanero-dvk
 117
 118 define Device/8dev_jalapeno-common
 119         $(call Device/FitImage)
 120         $(call Device/UbiFit)
 121         BLOCKSIZE := 128k
 122         PAGESIZE := 2048
 123         SOC := qcom-ipq4018
 124 endef
 125
 126 define Device/8dev_jalapeno
 127         $(call Device/8dev_jalapeno-common)
 128         DEVICE_VENDOR := 8devices
 129         DEVICE_MODEL := Jalapeno
 130 endef
 131 TARGET_DEVICES += 8dev_jalapeno
 132
 133 define Device/alfa-network_ap120c-ac
 134         $(call Device/FitImage)
 135         $(call Device/UbiFit)
 136         DEVICE_VENDOR := ALFA Network
 137         DEVICE_MODEL := AP120C-AC
 138         SOC := qcom-ipq4018
 139         DEVICE_PACKAGES := kmod-usb-acm \
 140                 kmod-tpm-i2c-atmel uboot-envtools
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         IMAGE_SIZE := 65536k
 144         IMAGES := nand-factory.bin nand-sysupgrade.bin
 145         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 146 endef
 147 TARGET_DEVICES += alfa-network_ap120c-ac
 148
 149 define Device/aruba_glenmorangie
 150         $(call Device/FitImageLzma)
 151         DEVICE_VENDOR := Aruba
 152         SOC := qcom-ipq4029
 153         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 154 endef
 155
 156 define Device/aruba_ap-303
 157         $(call Device/aruba_glenmorangie)
 158         DEVICE_MODEL := AP-303
 159 endef
 160 TARGET_DEVICES += aruba_ap-303
 161
 162 define Device/aruba_ap-303h
 163         $(call Device/aruba_glenmorangie)
 164         DEVICE_MODEL := AP-303H
 165 endef
 166 TARGET_DEVICES += aruba_ap-303h
 167
 168 define Device/aruba_ap-365
 169         $(call Device/aruba_glenmorangie)
 170         DEVICE_MODEL := AP-365
 171         DEVICE_PACKAGES += kmod-hwmon-ad7418
 172 endef
 173 TARGET_DEVICES += aruba_ap-365
 174
 175 define Device/asus_map-ac2200
 176         $(call Device/FitImageLzma)
 177         DEVICE_VENDOR := ASUS
 178         DEVICE_MODEL := Lyra (MAP-AC2200)
 179         SOC := qcom-ipq4019
 180         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 181 endef
 182 TARGET_DEVICES += asus_map-ac2200
 183
 184 define Device/asus_rt-ac58u
 185         $(call Device/FitImageLzma)
 186         DEVICE_VENDOR := ASUS
 187         DEVICE_MODEL := RT-AC58U
 188         SOC := qcom-ipq4018
 189         BLOCKSIZE := 128k
 190         PAGESIZE := 2048
 191         DTB_SIZE := 65536
 192         IMAGE_SIZE := 20439364
 193         FILESYSTEMS := squashfs
 194 #       Someone - in their infinite wisdom - decided to put the firmware
 195 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 196 #       Since u-boot works with strings we either need another fixup step
 197 #       to add a version... or we are very careful not to add '\0' into that
 198 #       string and call it a day.... Yeah, we do the latter!
 199         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 200         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 201                 kmod-usb-ledtrig-usbport
 202 endef
 203 TARGET_DEVICES += asus_rt-ac58u
 204
 205 define Device/avm_fritzbox-4040
 206         $(call Device/FitImageLzma)
 207         DEVICE_VENDOR := AVM
 208         DEVICE_MODEL := FRITZ!Box 4040
 209         SOC := qcom-ipq4018
 210         BOARD_NAME := fritz4040
 211         IMAGE_SIZE := 29056k
 212         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 213         UBOOT_PARTITION_SIZE := 524288
 214         IMAGES += eva.bin
 215         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 216         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 217         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 218 endef
 219 TARGET_DEVICES += avm_fritzbox-4040
 220
 221 define Device/avm_fritzbox-7530
 222         $(call Device/FitImageLzma)
 223         DEVICE_VENDOR := AVM
 224         DEVICE_MODEL := FRITZ!Box 7530
 225         SOC := qcom-ipq4019
 226         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 227 endef
 228 TARGET_DEVICES += avm_fritzbox-7530
 229
 230 define Device/avm_fritzrepeater-1200
 231         $(call Device/FitImageLzma)
 232         DEVICE_VENDOR := AVM
 233         DEVICE_MODEL := FRITZ!Repeater 1200
 234         SOC := qcom-ipq4019
 235         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
 236 endef
 237 TARGET_DEVICES += avm_fritzrepeater-1200
 238
 239 define Device/avm_fritzrepeater-3000
 240         $(call Device/FitImageLzma)
 241         DEVICE_VENDOR := AVM
 242         DEVICE_MODEL := FRITZ!Repeater 3000
 243         SOC := qcom-ipq4019
 244         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 245 endef
 246 TARGET_DEVICES += avm_fritzrepeater-3000
 247
 248 define Device/cellc_rtl30vw
 249         KERNEL_SUFFIX := -fit-uImage.itb
 250         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
 251         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 252         KERNEL_NAME := Image
 253         KERNEL_IN_UBI :=
 254         IMAGES := nand-factory.bin nand-sysupgrade.bin
 255         IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
 256         IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
 257         DEVICE_VENDOR := Cell C
 258         DEVICE_MODEL := RTL30VW
 259         SOC := qcom-ipq4019
 260         DEVICE_DTS_CONFIG := config@5
 261         KERNEL_INSTALL := 1
 262         KERNEL_SIZE := 4096k
 263         IMAGE_SIZE := 57344k
 264         BLOCKSIZE := 128k
 265         PAGESIZE := 2048
 266         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
 267 endef
 268 TARGET_DEVICES += cellc_rtl30vw
 269
 270 define Device/cilab_meshpoint-one
 271         $(call Device/8dev_jalapeno-common)
 272         DEVICE_VENDOR := Crisis Innovation Lab
 273         DEVICE_MODEL := MeshPoint.One
 274         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 275 endef
 276 TARGET_DEVICES += cilab_meshpoint-one
 277
 278 define Device/compex_wpj419
 279         $(call Device/FitImage)
 280         $(call Device/UbiFit)
 281         DEVICE_VENDOR := Compex
 282         DEVICE_MODEL := WPJ419
 283         SOC := qcom-ipq4019
 284         DEVICE_DTS_CONFIG := config@12
 285         KERNEL_INSTALL := 1
 286         BLOCKSIZE := 128k
 287         PAGESIZE := 2048
 288         FILESYSTEMS := squashfs
 289 endef
 290 TARGET_DEVICES += compex_wpj419
 291
 292 define Device/compex_wpj428
 293         $(call Device/FitImage)
 294         DEVICE_VENDOR := Compex
 295         DEVICE_MODEL := WPJ428
 296         SOC := qcom-ipq4028
 297         DEVICE_DTS_CONFIG := config@4
 298         BLOCKSIZE := 64k
 299         IMAGE_SIZE := 31232k
 300         KERNEL_SIZE := 4096k
 301         IMAGES += cpximg-6a04.bin
 302         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 303         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 304         DEVICE_PACKAGES := kmod-gpio-beeper
 305 endef
 306 TARGET_DEVICES += compex_wpj428
 307
 308 define Device/dlink_dap-2610
 309         $(call Device/FitImageLzma)
 310         DEVICE_VENDOR := D-Link
 311         DEVICE_MODEL := DAP-2610
 312         SOC := qcom-ipq4018
 313         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 314         BLOCKSIZE := 64k
 315         WRGG_DEVNAME := /dev/mtdblock/8
 316         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 317         IMAGE_SIZE := 14080k
 318         IMAGES += factory.bin
 319         # Bootloader expects a special 160 byte header which is added by
 320         # wrgg-image.
 321         # Factory image size must be larger than 6MB, and size in wrgg header must
 322         # match actual factory image size to be flashable from D-Link http server.
 323         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 324         # cannot be part of the wrgg image. This is solved in the factory image by
 325         # having the rootfs at the end of the image (without pad-rootfs). And in
 326         # the sysupgrade image only the kernel is included in the wrgg checksum,
 327         # but this is not flashable from the D-link http server.
 328         # append-rootfs must start on an erase block boundary.
 329         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 330         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 331         DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 332 endef
 333 TARGET_DEVICES += dlink_dap-2610
 334
 335 define Device/engenius_eap1300
 336         $(call Device/FitImage)
 337         DEVICE_VENDOR := EnGenius
 338         DEVICE_MODEL := EAP1300
 339         DEVICE_DTS_CONFIG := config@4
 340         BOARD_NAME := eap1300
 341         SOC := qcom-ipq4018
 342         KERNEL_SIZE := 5120k
 343         IMAGE_SIZE := 25344k
 344         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 345 endef
 346 TARGET_DEVICES += engenius_eap1300
 347
 348 define Device/engenius_eap2200
 349         $(call Device/FitImage)
 350         $(call Device/UbiFit)
 351         DEVICE_VENDOR := EnGenius
 352         DEVICE_MODEL := EAP2200
 353         SOC := qcom-ipq4019
 354         BLOCKSIZE := 128k
 355         PAGESIZE := 2048
 356         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 357 endef
 358 TARGET_DEVICES += engenius_eap2200
 359
 360 define Device/engenius_emd1
 361         $(call Device/FitImage)
 362         DEVICE_VENDOR := EnGenius
 363         DEVICE_MODEL := EMD1
 364         DEVICE_DTS_CONFIG := config@4
 365         SOC := qcom-ipq4018
 366         IMAGE_SIZE := 30720k
 367         IMAGES += factory.bin
 368         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 369         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 370 endef
 371 TARGET_DEVICES += engenius_emd1
 372
 373 define Device/engenius_emr3500
 374         $(call Device/FitImage)
 375         DEVICE_VENDOR := EnGenius
 376         DEVICE_MODEL := EMR3500
 377         DEVICE_DTS_CONFIG := config@4
 378         SOC := qcom-ipq4018
 379         KERNEL_SIZE := 4096k
 380         IMAGE_SIZE := 30720k
 381         IMAGES += factory.bin
 382         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 383         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 384 endef
 385 TARGET_DEVICES += engenius_emr3500
 386
 387 define Device/engenius_ens620ext
 388         $(call Device/FitImage)
 389         DEVICE_VENDOR := EnGenius
 390         DEVICE_MODEL := ENS620EXT
 391         SOC := qcom-ipq4018
 392         DEVICE_DTS_CONFIG := config@4
 393         BLOCKSIZE := 64k
 394         PAGESIZE := 256
 395         BOARD_NAME := ENS620EXT
 396         VENDOR_ID := 0x0101
 397         PRODUCT_ID := 0x79
 398         PRODUCT_ID_NEW := 0xA4
 399         DATECODE := 190507
 400         FW_VER := 3.1.2
 401         FW_VER_NEW := 3.5.6
 402         CW_VER := 1.8.99
 403         IMAGE_SIZE := 21312k
 404         KERNEL_SIZE := 5120k
 405         FILESYSTEMS := squashfs
 406         IMAGES += factory_30.bin factory_35.bin
 407         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 408         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 409         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 410 endef
 411 TARGET_DEVICES += engenius_ens620ext
 412
 413 define Device/ezviz_cs-w3-wd1200g-eup
 414         $(call Device/FitImage)
 415         DEVICE_VENDOR := EZVIZ
 416         DEVICE_MODEL := CS-W3-WD1200G
 417         DEVICE_VARIANT := EUP
 418         DEVICE_DTS_CONFIG := config@4
 419         IMAGE_SIZE := 14848k
 420         SOC := qcom-ipq4018
 421         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 422                 append-metadata
 423         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 424                 ipq-wifi-ezviz_cs-w3-wd1200g-eup
 425 endef
 426 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 427
 428 define Device/glinet_gl-b1300
 429         $(call Device/FitImage)
 430         DEVICE_VENDOR := GL.iNet
 431         DEVICE_MODEL := GL-B1300
 432         BOARD_NAME := gl-b1300
 433         SOC := qcom-ipq4029
 434         KERNEL_SIZE := 4096k
 435         IMAGE_SIZE := 26624k
 436         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 437 endef
 438 TARGET_DEVICES += glinet_gl-b1300
 439
 440 define Device/linksys_ea6350v3
 441         # The Linksys EA6350v3 has a uboot bootloader that does not
 442         # support either booting lzma kernel images nor booting UBI
 443         # partitions. This uboot, however, supports raw kernel images and
 444         # gzipped images.
 445         #
 446         # As for the time of writing this, the device will boot the kernel
 447         # from a fixed address with a fixed length of 3MiB. Also, the
 448         # device has a hard-coded kernel command line that requieres the
 449         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 450         # Oh... and the kernel partition overlaps with the rootfs
 451         # partition (the same for alt_kernel and alt_rootfs).
 452         #
 453         # If you are planing re-partitioning the device, you may want to
 454         # keep those details in mind:
 455         # 1. The kernel adresses you should honor are 0x00000000 and
 456         #    0x02800000 respectively.
 457         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 458         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 459         # 4. The kernel command line from uboot is harcoded to boot with
 460         #    rootfs either in mtd11 or mtd13.
 461         $(call Device/FitzImage)
 462         DEVICE_VENDOR := Linksys
 463         DEVICE_MODEL := EA6350
 464         DEVICE_VARIANT := v3
 465         SOC := qcom-ipq4018
 466         BLOCKSIZE := 128k
 467         PAGESIZE := 2048
 468         KERNEL_SIZE := 3072k
 469         IMAGE_SIZE := 37888k
 470         UBINIZE_OPTS := -E 5
 471         IMAGES += factory.bin
 472         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 473         DEVICE_PACKAGES := uboot-envtools
 474 endef
 475 TARGET_DEVICES += linksys_ea6350v3
 476
 477 define Device/linksys_ea8300
 478         $(call Device/FitzImage)
 479         DEVICE_VENDOR := Linksys
 480         DEVICE_MODEL := EA8300
 481         SOC := qcom-ipq4019
 482         KERNEL_SIZE := 3072k
 483         IMAGE_SIZE := 87040k
 484         BLOCKSIZE := 128k
 485         PAGESIZE := 2048
 486         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 487         IMAGES += factory.bin
 488         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 489         DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 490 endef
 491 TARGET_DEVICES += linksys_ea8300
 492
 493 define Device/meraki_mr33
 494         $(call Device/FitImage)
 495         DEVICE_VENDOR := Cisco Meraki
 496         DEVICE_MODEL := MR33
 497         SOC := qcom-ipq4029
 498         BLOCKSIZE := 128k
 499         PAGESIZE := 2048
 500         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 501 endef
 502 TARGET_DEVICES += meraki_mr33
 503
 504 define Device/mobipromo_cm520-79f
 505         $(call Device/FitzImage)
 506         $(call Device/UbiFit)
 507         DEVICE_VENDOR := MobiPromo
 508         DEVICE_MODEL := CM520-79F
 509         SOC := qcom-ipq4019
 510         BLOCKSIZE := 128k
 511         PAGESIZE := 2048
 512         DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
 513 endef
 514 TARGET_DEVICES += mobipromo_cm520-79f
 515
 516 define Device/netgear_ex61x0v2
 517         $(call Device/DniImage)
 518         DEVICE_DTS_CONFIG := config@4
 519         NETGEAR_BOARD_ID := EX6150v2series
 520         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 521         IMAGE_SIZE := 14400k
 522         SOC := qcom-ipq4018
 523 endef
 524
 525 define Device/netgear_ex6100v2
 526         $(call Device/netgear_ex61x0v2)
 527         DEVICE_VENDOR := Netgear
 528         DEVICE_MODEL := EX6100
 529         DEVICE_VARIANT := v2
 530 endef
 531 TARGET_DEVICES += netgear_ex6100v2
 532
 533 define Device/netgear_ex6150v2
 534         $(call Device/netgear_ex61x0v2)
 535         DEVICE_VENDOR := Netgear
 536         DEVICE_MODEL := EX6150
 537         DEVICE_VARIANT := v2
 538 endef
 539 TARGET_DEVICES += netgear_ex6150v2
 540
 541 define Device/openmesh_a42
 542         $(call Device/FitImageLzma)
 543         DEVICE_VENDOR := OpenMesh
 544         DEVICE_MODEL := A42
 545         SOC := qcom-ipq4018
 546         DEVICE_DTS_CONFIG := config@om.a42
 547         BLOCKSIZE := 64k
 548         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 549         IMAGE_SIZE := 15616k
 550         IMAGES += factory.bin
 551         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 552         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 553         DEVICE_PACKAGES := uboot-envtools
 554 endef
 555 TARGET_DEVICES += openmesh_a42
 556
 557 define Device/openmesh_a62
 558         $(call Device/FitImageLzma)
 559         DEVICE_VENDOR := OpenMesh
 560         DEVICE_MODEL := A62
 561         SOC := qcom-ipq4019
 562         DEVICE_DTS_CONFIG := config@om.a62
 563         BLOCKSIZE := 64k
 564         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 565         IMAGE_SIZE := 15552k
 566         IMAGES += factory.bin
 567         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 568         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 569         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
 570 endef
 571
 572 TARGET_DEVICES += openmesh_a62
 573
 574 define Device/qcom_ap-dk01.1-c1
 575         DEVICE_VENDOR := Qualcomm Atheros
 576         DEVICE_MODEL := AP-DK01.1
 577         DEVICE_VARIANT := C1
 578         BOARD_NAME := ap-dk01.1-c1
 579         SOC := qcom-ipq4019
 580         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 581         KERNEL_INSTALL := 1
 582         KERNEL_SIZE := 4096k
 583         IMAGE_SIZE := 26624k
 584         $(call Device/FitImage)
 585         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 586 endef
 587 TARGET_DEVICES += qcom_ap-dk01.1-c1
 588
 589 define Device/qcom_ap-dk04.1-c1
 590         $(call Device/FitImage)
 591         $(call Device/UbiFit)
 592         DEVICE_VENDOR := Qualcomm Atheros
 593         DEVICE_MODEL := AP-DK04.1
 594         DEVICE_VARIANT := C1
 595         SOC := qcom-ipq4019
 596         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 597         KERNEL_INSTALL := 1
 598         KERNEL_SIZE := 4048k
 599         BLOCKSIZE := 128k
 600         PAGESIZE := 2048
 601         BOARD_NAME := ap-dk04.1-c1
 602 endef
 603 TARGET_DEVICES += qcom_ap-dk04.1-c1
 604
 605 define Device/qxwlan_e2600ac-c1
 606         $(call Device/FitImage)
 607         DEVICE_VENDOR := Qxwlan
 608         DEVICE_MODEL := E2600AC
 609         DEVICE_VARIANT := C1
 610         BOARD_NAME := e2600ac-c1
 611         SOC := qcom-ipq4019
 612         KERNEL_SIZE := 4096k
 613         IMAGE_SIZE := 31232k
 614         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 615         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 616 endef
 617 TARGET_DEVICES += qxwlan_e2600ac-c1
 618
 619 define Device/qxwlan_e2600ac-c2
 620         $(call Device/FitImage)
 621         $(call Device/UbiFit)
 622         DEVICE_VENDOR := Qxwlan
 623         DEVICE_MODEL := E2600AC
 624         DEVICE_VARIANT := C2
 625         SOC := qcom-ipq4019
 626         KERNEL_INSTALL := 1
 627         BLOCKSIZE := 128k
 628         PAGESIZE := 2048
 629         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 630 endef
 631 TARGET_DEVICES += qxwlan_e2600ac-c2
 632
 633 define Device/unielec_u4019-32m
 634         $(call Device/FitImage)
 635         DEVICE_VENDOR := Unielec
 636         DEVICE_MODEL := U4019
 637         DEVICE_VARIANT := 32M
 638         BOARD_NAME := u4019-32m
 639         SOC := qcom-ipq4019
 640         KERNEL_SIZE := 4096k
 641         IMAGE_SIZE := 31232k
 642         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 643 endef
 644 TARGET_DEVICES += unielec_u4019-32m
 645
 646 define Device/zyxel_nbg6617
 647         $(call Device/FitImageLzma)
 648         DEVICE_VENDOR := ZyXEL
 649         DEVICE_MODEL := NBG6617
 650         SOC := qcom-ipq4018
 651         KERNEL_SIZE := 4096k
 652         ROOTFS_SIZE := 24960k
 653         RAS_BOARD := NBG6617
 654         RAS_ROOTFS_SIZE := 19840k
 655         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 656         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 657         IMAGES += factory.bin
 658 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 659 #       at least as large as the one of the initial firmware image (not the current
 660 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
 661 #       this minimum-size. However, the larger image can be flashed both ways.
 662         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 663         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 664         DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
 665 endef
 666 TARGET_DEVICES += zyxel_nbg6617
 667
 668 define Device/zyxel_wre6606
 669         $(call Device/FitImage)
 670         DEVICE_VENDOR := ZyXEL
 671         DEVICE_MODEL := WRE6606
 672         DEVICE_DTS_CONFIG := config@4
 673         SOC := qcom-ipq4018
 674         IMAGE_SIZE := 13184k
 675         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 676         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 677 endef
 678 TARGET_DEVICES += zyxel_wre6606
 679
 680 $(eval $(call BuildImage))