target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -fit-uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -fit-uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -fit-zImage.itb
  20         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  27         IMAGE/nand-factory.ubi := append-ubi
  28         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
  47 endef
  48
  49 define Build/append-rutx-metadata
  50         echo \
  51                 '{ \
  52                         "device_code": [".*"], \
  53                         "hwver": [".*"], \
  54                         "batch": [".*"], \
  55                         "serial": [".*"], \
  56                         "supported_devices":["teltonika,rutx"] \
  57                 }' | fwtool -I - $@
  58 endef
  59
  60 define Build/mkmylofw_32m
  61         $(eval device_id=$(word 1,$(1)))
  62         $(eval revision=$(word 2,$(1)))
  63
  64         let \
  65                 size="$$(stat -c%s $@)" \
  66                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  67                 pad="(pad - (size % pad)) % pad" \
  68                 newsize='size + pad'; \
  69                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  70                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  71                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  72                 $@.new
  73         @mv $@.new $@
  74 endef
  75
  76 define Build/wac5xx-netgear-tar
  77         mkdir $@.tmp
  78         mv $@ $@.tmp/wac5xx-ubifs-root.img
  79         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  80         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  81         echo "WAC505_V9.9.9.9" > $@.tmp/version
  82         tar -C $@.tmp/ -cf $@ .
  83         rm -rf $@.tmp
  84 endef
  85
  86 define Build/qsdk-ipq-factory-nand-askey
  87         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  88                 askey_kernel $(IMAGE_KERNEL) \
  89                 askey_fs $(IMAGE_ROOTFS) \
  90                 ubifs $@
  91         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  92         @mv $@.new $@
  93 endef
  94
  95 define Build/qsdk-ipq-app-gpt
  96         cp $@ $@.tmp 2>/dev/null || true
  97         ptgen -g -o $@.tmp -a 1 -l 1024 \
  98                         -t 0x2e -N 0:HLOS -r -p 32M \
  99                         -t 0x83 -N rootfs -r -p 128M \
 100                                 -N rootfs_data -p 512M
 101         cat $@.tmp >> $@
 102         rm $@.tmp
 103 endef
 104
 105 define Build/SenaoFW
 106         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 107                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 108                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 109                 -e $@ \
 110                 -o $@.new
 111         @cp $@.new $@
 112 endef
 113
 114 define Build/wrgg-image
 115         mkwrggimg -i $@ \
 116         -o $@.new \
 117         -d "$(WRGG_DEVNAME)" \
 118         -s "$(WRGG_SIGNATURE)" \
 119         -v "" -m "" -B ""
 120         mv $@.new $@
 121 endef
 122
 123 define Device/8dev_habanero-dvk
 124         $(call Device/FitImageLzma)
 125         DEVICE_VENDOR := 8devices
 126         DEVICE_MODEL := Habanero DVK
 127         IMAGE_SIZE := 30976k
 128         SOC := qcom-ipq4019
 129         DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
 130         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 131 endef
 132 TARGET_DEVICES += 8dev_habanero-dvk
 133
 134 define Device/8dev_jalapeno-common
 135         $(call Device/FitImage)
 136         $(call Device/UbiFit)
 137         BLOCKSIZE := 128k
 138         PAGESIZE := 2048
 139         SOC := qcom-ipq4018
 140 endef
 141
 142 define Device/8dev_jalapeno
 143         $(call Device/8dev_jalapeno-common)
 144         DEVICE_VENDOR := 8devices
 145         DEVICE_MODEL := Jalapeno
 146 endef
 147 TARGET_DEVICES += 8dev_jalapeno
 148
 149 define Device/alfa-network_ap120c-ac
 150         $(call Device/FitImage)
 151         $(call Device/UbiFit)
 152         DEVICE_VENDOR := ALFA Network
 153         DEVICE_MODEL := AP120C-AC
 154         SOC := qcom-ipq4018
 155         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 156         BLOCKSIZE := 128k
 157         PAGESIZE := 2048
 158         IMAGE_SIZE := 65536k
 159         IMAGES := nand-factory.bin nand-sysupgrade.bin
 160         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 161 endef
 162 TARGET_DEVICES += alfa-network_ap120c-ac
 163
 164 define Device/aruba_glenmorangie
 165         $(call Device/FitImageLzma)
 166         DEVICE_VENDOR := Aruba
 167         SOC := qcom-ipq4029
 168         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 169 endef
 170
 171 define Device/aruba_ap-303
 172         $(call Device/aruba_glenmorangie)
 173         DEVICE_MODEL := AP-303
 174 endef
 175 TARGET_DEVICES += aruba_ap-303
 176
 177 define Device/aruba_ap-303h
 178         $(call Device/aruba_glenmorangie)
 179         DEVICE_MODEL := AP-303H
 180 endef
 181 TARGET_DEVICES += aruba_ap-303h
 182
 183 define Device/aruba_ap-365
 184         $(call Device/aruba_glenmorangie)
 185         DEVICE_MODEL := AP-365
 186         DEVICE_PACKAGES += kmod-hwmon-ad7418
 187 endef
 188 TARGET_DEVICES += aruba_ap-365
 189
 190 define Device/asus_map-ac2200
 191         $(call Device/FitImageLzma)
 192         DEVICE_VENDOR := ASUS
 193         DEVICE_MODEL := Lyra (MAP-AC2200)
 194         SOC := qcom-ipq4019
 195         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 196 endef
 197 TARGET_DEVICES += asus_map-ac2200
 198
 199 define Device/asus_rt-ac58u
 200         $(call Device/FitImageLzma)
 201         DEVICE_VENDOR := ASUS
 202         DEVICE_MODEL := RT-AC58U
 203         SOC := qcom-ipq4018
 204         BLOCKSIZE := 128k
 205         PAGESIZE := 2048
 206         DTB_SIZE := 65536
 207         IMAGE_SIZE := 20439364
 208         FILESYSTEMS := squashfs
 209 #       Someone - in their infinite wisdom - decided to put the firmware
 210 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 211 #       Since u-boot works with strings we either need another fixup step
 212 #       to add a version... or we are very careful not to add '\0' into that
 213 #       string and call it a day.... Yeah, we do the latter!
 214         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 215         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 216                 kmod-usb-ledtrig-usbport
 217 endef
 218 TARGET_DEVICES += asus_rt-ac58u
 219
 220 define Device/avm_fritzbox-4040
 221         $(call Device/FitImageLzma)
 222         DEVICE_VENDOR := AVM
 223         DEVICE_MODEL := FRITZ!Box 4040
 224         SOC := qcom-ipq4018
 225         BOARD_NAME := fritz4040
 226         IMAGE_SIZE := 29056k
 227         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 228         UBOOT_PARTITION_SIZE := 524288
 229         IMAGES += eva.bin
 230         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 231         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 232         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 233 endef
 234 TARGET_DEVICES += avm_fritzbox-4040
 235
 236 define Device/avm_fritzbox-7530
 237         $(call Device/FitImageLzma)
 238         DEVICE_VENDOR := AVM
 239         DEVICE_MODEL := FRITZ!Box 7530
 240         SOC := qcom-ipq4019
 241         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 242 endef
 243 TARGET_DEVICES += avm_fritzbox-7530
 244
 245 define Device/avm_fritzrepeater-1200
 246         $(call Device/FitImageLzma)
 247         DEVICE_VENDOR := AVM
 248         DEVICE_MODEL := FRITZ!Repeater 1200
 249         SOC := qcom-ipq4019
 250         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
 251 endef
 252 TARGET_DEVICES += avm_fritzrepeater-1200
 253
 254 define Device/avm_fritzrepeater-3000
 255         $(call Device/FitImageLzma)
 256         DEVICE_VENDOR := AVM
 257         DEVICE_MODEL := FRITZ!Repeater 3000
 258         SOC := qcom-ipq4019
 259         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 260 endef
 261 TARGET_DEVICES += avm_fritzrepeater-3000
 262
 263 define Device/buffalo_wtr-m2133hp
 264         $(call Device/FitImage)
 265         $(call Device/UbiFit)
 266         DEVICE_VENDOR := Buffalo
 267         DEVICE_MODEL := WTR-M2133HP
 268         SOC := qcom-ipq4019
 269         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
 270         BLOCKSIZE := 128k
 271         PAGESIZE := 2048
 272 endef
 273 TARGET_DEVICES += buffalo_wtr-m2133hp
 274
 275 define Device/cellc_rtl30vw
 276         KERNEL_SUFFIX := -fit-zImage.itb
 277         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
 278         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 279         KERNEL_NAME := zImage
 280         KERNEL_IN_UBI :=
 281         IMAGES := nand-factory.bin nand-sysupgrade.bin
 282         IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
 283         IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
 284         DEVICE_VENDOR := Cell C
 285         DEVICE_MODEL := RTL30VW
 286         SOC := qcom-ipq4019
 287         DEVICE_DTS_CONFIG := config@5
 288         KERNEL_INSTALL := 1
 289         KERNEL_SIZE := 4096k
 290         IMAGE_SIZE := 57344k
 291         BLOCKSIZE := 128k
 292         PAGESIZE := 2048
 293         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
 294 endef
 295 TARGET_DEVICES += cellc_rtl30vw
 296
 297 define Device/cilab_meshpoint-one
 298         $(call Device/8dev_jalapeno-common)
 299         DEVICE_VENDOR := Crisis Innovation Lab
 300         DEVICE_MODEL := MeshPoint.One
 301         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 302 endef
 303 TARGET_DEVICES += cilab_meshpoint-one
 304
 305 define Device/compex_wpj419
 306         $(call Device/FitImage)
 307         $(call Device/UbiFit)
 308         DEVICE_VENDOR := Compex
 309         DEVICE_MODEL := WPJ419
 310         SOC := qcom-ipq4019
 311         DEVICE_DTS_CONFIG := config@12
 312         KERNEL_INSTALL := 1
 313         BLOCKSIZE := 128k
 314         PAGESIZE := 2048
 315         FILESYSTEMS := squashfs
 316 endef
 317 TARGET_DEVICES += compex_wpj419
 318
 319 define Device/compex_wpj428
 320         $(call Device/FitImage)
 321         DEVICE_VENDOR := Compex
 322         DEVICE_MODEL := WPJ428
 323         SOC := qcom-ipq4028
 324         DEVICE_DTS_CONFIG := config@4
 325         BLOCKSIZE := 64k
 326         IMAGE_SIZE := 31232k
 327         KERNEL_SIZE := 4096k
 328         IMAGES += cpximg-6a04.bin
 329         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 330         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 331         DEVICE_PACKAGES := kmod-gpio-beeper
 332         DEFAULT := n
 333 endef
 334 TARGET_DEVICES += compex_wpj428
 335
 336 define Device/devolo_magic-2-wifi-next
 337         $(call Device/FitImage)
 338         DEVICE_VENDOR := devolo
 339         DEVICE_MODEL := Magic 2 WiFi next
 340         SOC := qcom-ipq4018
 341         KERNEL_SIZE := 4096k
 342
 343         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 344         # it will bootm it, just like we want for the initramfs.
 345         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
 346                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 347
 348         IMAGE_SIZE := 26624k
 349         IMAGES := sysupgrade.bin
 350         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 351         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 352         DEFAULT := n
 353 endef
 354 TARGET_DEVICES += devolo_magic-2-wifi-next
 355
 356 define Device/dlink_dap-2610
 357         $(call Device/FitImageLzma)
 358         DEVICE_VENDOR := D-Link
 359         DEVICE_MODEL := DAP-2610
 360         SOC := qcom-ipq4018
 361         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 362         BLOCKSIZE := 64k
 363         WRGG_DEVNAME := /dev/mtdblock/8
 364         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 365         IMAGE_SIZE := 14080k
 366         IMAGES += factory.bin
 367         # Bootloader expects a special 160 byte header which is added by
 368         # wrgg-image.
 369         # Factory image size must be larger than 6MB, and size in wrgg header must
 370         # match actual factory image size to be flashable from D-Link http server.
 371         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 372         # cannot be part of the wrgg image. This is solved in the factory image by
 373         # having the rootfs at the end of the image (without pad-rootfs). And in
 374         # the sysupgrade image only the kernel is included in the wrgg checksum,
 375         # but this is not flashable from the D-link http server.
 376         # append-rootfs must start on an erase block boundary.
 377         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 378         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 379         DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 380 endef
 381 TARGET_DEVICES += dlink_dap-2610
 382
 383 define Device/edgecore_ecw5211
 384         $(call Device/FitImage)
 385         $(call Device/UbiFit)
 386         DEVICE_VENDOR := Edgecore
 387         DEVICE_MODEL := ECW5211
 388         SOC := qcom-ipq4018
 389         BLOCKSIZE := 128k
 390         PAGESIZE := 2048
 391         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 392         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 393 endef
 394 TARGET_DEVICES += edgecore_ecw5211
 395
 396 define Device/edgecore_oap100
 397         $(call Device/FitImage)
 398         $(call Device/UbiFit)
 399         DEVICE_VENDOR := Edgecore
 400         DEVICE_MODEL := OAP100
 401         SOC := qcom-ipq4019
 402         BLOCKSIZE := 128k
 403         PAGESIZE := 2048
 404         IMAGES := nand-sysupgrade.bin
 405         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 406         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 407 endef
 408 TARGET_DEVICES += edgecore_oap100
 409
 410 define Device/engenius_eap1300
 411         $(call Device/FitImage)
 412         DEVICE_VENDOR := EnGenius
 413         DEVICE_MODEL := EAP1300
 414         DEVICE_DTS_CONFIG := config@4
 415         BOARD_NAME := eap1300
 416         SOC := qcom-ipq4018
 417         KERNEL_SIZE := 5120k
 418         IMAGE_SIZE := 25344k
 419         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 420 endef
 421 TARGET_DEVICES += engenius_eap1300
 422
 423 define Device/engenius_eap2200
 424         $(call Device/FitImage)
 425         $(call Device/UbiFit)
 426         DEVICE_VENDOR := EnGenius
 427         DEVICE_MODEL := EAP2200
 428         SOC := qcom-ipq4019
 429         BLOCKSIZE := 128k
 430         PAGESIZE := 2048
 431         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 432 endef
 433 TARGET_DEVICES += engenius_eap2200
 434
 435 define Device/engenius_emd1
 436         $(call Device/FitImage)
 437         DEVICE_VENDOR := EnGenius
 438         DEVICE_MODEL := EMD1
 439         DEVICE_DTS_CONFIG := config@4
 440         SOC := qcom-ipq4018
 441         IMAGE_SIZE := 30720k
 442         IMAGES += factory.bin
 443         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 444         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 445         DEVICE_PACKAGES := ipq-wifi-engenius_emd1
 446 endef
 447 TARGET_DEVICES += engenius_emd1
 448
 449 define Device/engenius_emr3500
 450         $(call Device/FitImage)
 451         DEVICE_VENDOR := EnGenius
 452         DEVICE_MODEL := EMR3500
 453         DEVICE_DTS_CONFIG := config@4
 454         SOC := qcom-ipq4018
 455         KERNEL_SIZE := 4096k
 456         IMAGE_SIZE := 30720k
 457         IMAGES += factory.bin
 458         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 459         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 460         DEVICE_PACKAGES := ipq-wifi-engenius_emr3500
 461         DEFAULT := n
 462 endef
 463 TARGET_DEVICES += engenius_emr3500
 464
 465 define Device/engenius_ens620ext
 466         $(call Device/FitImage)
 467         DEVICE_VENDOR := EnGenius
 468         DEVICE_MODEL := ENS620EXT
 469         SOC := qcom-ipq4018
 470         DEVICE_DTS_CONFIG := config@4
 471         BLOCKSIZE := 64k
 472         PAGESIZE := 256
 473         BOARD_NAME := ENS620EXT
 474         VENDOR_ID := 0x0101
 475         PRODUCT_ID := 0x79
 476         PRODUCT_ID_NEW := 0xA4
 477         DATECODE := 190507
 478         FW_VER := 3.1.2
 479         FW_VER_NEW := 3.5.6
 480         CW_VER := 1.8.99
 481         IMAGE_SIZE := 21312k
 482         KERNEL_SIZE := 5120k
 483         FILESYSTEMS := squashfs
 484         IMAGES += factory_30.bin factory_35.bin
 485         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 486         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 487         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 488 endef
 489 TARGET_DEVICES += engenius_ens620ext
 490
 491 define Device/ezviz_cs-w3-wd1200g-eup
 492         $(call Device/FitImage)
 493         DEVICE_VENDOR := EZVIZ
 494         DEVICE_MODEL := CS-W3-WD1200G
 495         DEVICE_VARIANT := EUP
 496         IMAGE_SIZE := 14848k
 497         KERNEL_SIZE = 6m
 498         SOC := qcom-ipq4018
 499         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 500                 append-metadata
 501         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 502                 ipq-wifi-ezviz_cs-w3-wd1200g-eup
 503         DEVICE_COMPAT_VERSION := 2.0
 504         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 505                 Upgrade via sysupgrade mechanism is not possible.
 506 endef
 507 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 508
 509 define Device/glinet_gl-ap1300
 510         $(call Device/FitImage)
 511         $(call Device/UbiFit)
 512         DEVICE_VENDOR := GL.iNet
 513         DEVICE_MODEL := GL-AP1300
 514         SOC := qcom-ipq4018
 515         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 516         BLOCKSIZE := 128k
 517         PAGESIZE := 2048
 518         IMAGE_SIZE := 131072k
 519         KERNEL_INSTALL := 1
 520         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
 521 endef
 522 TARGET_DEVICES += glinet_gl-ap1300
 523
 524 define Device/glinet_gl-b1300
 525         $(call Device/FitzImage)
 526         DEVICE_VENDOR := GL.iNet
 527         DEVICE_MODEL := GL-B1300
 528         BOARD_NAME := gl-b1300
 529         SOC := qcom-ipq4029
 530         KERNEL_SIZE := 4096k
 531         IMAGE_SIZE := 26624k
 532         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 533 endef
 534 TARGET_DEVICES += glinet_gl-b1300
 535
 536 define Device/glinet_gl-b2200
 537         $(call Device/FitzImage)
 538         DEVICE_VENDOR := GL.iNet
 539         DEVICE_MODEL := GL-B2200
 540         SOC := qcom-ipq4019
 541         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 542         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 543         IMAGES := emmc.img.gz sysupgrade.bin
 544         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 545                 pad-to 1024k | append-kernel |\
 546                 pad-to 33792k | append-rootfs |\
 547                 append-metadata | gzip
 548         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 549         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-glinet_gl-b2200 \
 550                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 551 endef
 552 TARGET_DEVICES += glinet_gl-b2200
 553
 554 define Device/glinet_gl-s1300
 555         $(call Device/FitzImage)
 556         DEVICE_VENDOR := GL.iNet
 557         DEVICE_MODEL := GL-S1300
 558         SOC := qcom-ipq4029
 559         KERNEL_SIZE := 4096k
 560         IMAGE_SIZE := 26624k
 561         IMAGES := sysupgrade.bin
 562         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 563         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 564 endef
 565 TARGET_DEVICES += glinet_gl-s1300
 566
 567 define Device/linksys_ea6350v3
 568         # The Linksys EA6350v3 has a uboot bootloader that does not
 569         # support either booting lzma kernel images nor booting UBI
 570         # partitions. This uboot, however, supports raw kernel images and
 571         # gzipped images.
 572         #
 573         # As for the time of writing this, the device will boot the kernel
 574         # from a fixed address with a fixed length of 3MiB. Also, the
 575         # device has a hard-coded kernel command line that requieres the
 576         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 577         # Oh... and the kernel partition overlaps with the rootfs
 578         # partition (the same for alt_kernel and alt_rootfs).
 579         #
 580         # If you are planing re-partitioning the device, you may want to
 581         # keep those details in mind:
 582         # 1. The kernel adresses you should honor are 0x00000000 and
 583         #    0x02800000 respectively.
 584         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 585         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 586         # 4. The kernel command line from uboot is harcoded to boot with
 587         #    rootfs either in mtd11 or mtd13.
 588         $(call Device/FitzImage)
 589         DEVICE_VENDOR := Linksys
 590         DEVICE_MODEL := EA6350
 591         DEVICE_VARIANT := v3
 592         SOC := qcom-ipq4018
 593         BLOCKSIZE := 128k
 594         PAGESIZE := 2048
 595         KERNEL_SIZE := 3072k
 596         IMAGE_SIZE := 37888k
 597         UBINIZE_OPTS := -E 5
 598         IMAGES += factory.bin
 599         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 600 endef
 601 TARGET_DEVICES += linksys_ea6350v3
 602
 603 define Device/linksys_ea8300
 604         $(call Device/FitzImage)
 605         DEVICE_VENDOR := Linksys
 606         DEVICE_MODEL := EA8300
 607         SOC := qcom-ipq4019
 608         KERNEL_SIZE := 3072k
 609         IMAGE_SIZE := 87040k
 610         BLOCKSIZE := 128k
 611         PAGESIZE := 2048
 612         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 613         IMAGES += factory.bin
 614         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 615         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 616 endef
 617 TARGET_DEVICES += linksys_ea8300
 618
 619 define Device/linksys_mr8300
 620         $(call Device/FitzImage)
 621         DEVICE_VENDOR := Linksys
 622         DEVICE_MODEL := MR8300
 623         SOC := qcom-ipq4019
 624         KERNEL_SIZE := 3072k
 625         IMAGE_SIZE := 87040k
 626         BLOCKSIZE := 128k
 627         PAGESIZE := 2048
 628         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 629         IMAGES += factory.bin
 630         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 631         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
 632 endef
 633 TARGET_DEVICES += linksys_mr8300
 634
 635 define Device/luma_wrtq-329acn
 636         $(call Device/FitImage)
 637         DEVICE_VENDOR := Luma Home
 638         DEVICE_MODEL := WRTQ-329ACN
 639         SOC := qcom-ipq4018
 640         DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 641         IMAGE_SIZE := 76632k
 642         BLOCKSIZE := 128k
 643         PAGESIZE := 2048
 644 endef
 645 TARGET_DEVICES += luma_wrtq-329acn
 646
 647 define Device/meraki_mr33
 648         $(call Device/FitImage)
 649         DEVICE_VENDOR := Cisco Meraki
 650         DEVICE_MODEL := MR33
 651         SOC := qcom-ipq4029
 652         BLOCKSIZE := 128k
 653         PAGESIZE := 2048
 654         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 655 endef
 656 TARGET_DEVICES += meraki_mr33
 657
 658 define Device/mobipromo_cm520-79f
 659         $(call Device/FitzImage)
 660         $(call Device/UbiFit)
 661         DEVICE_VENDOR := MobiPromo
 662         DEVICE_MODEL := CM520-79F
 663         SOC := qcom-ipq4019
 664         BLOCKSIZE := 128k
 665         PAGESIZE := 2048
 666         DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
 667 endef
 668 TARGET_DEVICES += mobipromo_cm520-79f
 669
 670 define Device/netgear_ex61x0v2
 671         $(call Device/DniImage)
 672         DEVICE_VENDOR := NETGEAR
 673         DEVICE_DTS_CONFIG := config@4
 674         NETGEAR_BOARD_ID := EX6150v2series
 675         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 676         IMAGE_SIZE := 14400k
 677         SOC := qcom-ipq4018
 678 endef
 679
 680 define Device/netgear_ex6100v2
 681         $(call Device/netgear_ex61x0v2)
 682         DEVICE_MODEL := EX6100
 683         DEVICE_VARIANT := v2
 684 endef
 685 TARGET_DEVICES += netgear_ex6100v2
 686
 687 define Device/netgear_ex6150v2
 688         $(call Device/netgear_ex61x0v2)
 689         DEVICE_MODEL := EX6150
 690         DEVICE_VARIANT := v2
 691 endef
 692 TARGET_DEVICES += netgear_ex6150v2
 693
 694 define Device/netgear_orbi
 695         $(call Device/DniImage)
 696         SOC := qcom-ipq4019
 697         DEVICE_VENDOR := NETGEAR
 698         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 699                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 700                 append-rootfs | pad-rootfs | netgear-dni
 701         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 702                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 703         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 704 endef
 705
 706 define Device/netgear_rbx50
 707         $(call Device/netgear_orbi)
 708         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 709         KERNEL_SIZE := 3932160
 710         ROOTFS_SIZE := 32243712
 711         IMAGE_SIZE := 36175872
 712 endef
 713
 714 define Device/netgear_rbr50
 715         $(call Device/netgear_rbx50)
 716         DEVICE_MODEL := RBR50
 717         DEVICE_VARIANT := v1
 718         NETGEAR_BOARD_ID := RBR50
 719 endef
 720 TARGET_DEVICES += netgear_rbr50
 721
 722 define Device/netgear_rbs50
 723         $(call Device/netgear_rbx50)
 724         DEVICE_MODEL := RBS50
 725         DEVICE_VARIANT := v1
 726         NETGEAR_BOARD_ID := RBS50
 727 endef
 728 TARGET_DEVICES += netgear_rbs50
 729
 730 define Device/netgear_srx60
 731         $(call Device/netgear_orbi)
 732         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 733         KERNEL_SIZE := 3932160
 734         ROOTFS_SIZE := 32243712
 735         IMAGE_SIZE := 36175872
 736 endef
 737
 738 define Device/netgear_srr60
 739         $(call Device/netgear_srx60)
 740         DEVICE_MODEL := SRR60
 741         NETGEAR_BOARD_ID := SRR60
 742 endef
 743 TARGET_DEVICES += netgear_srr60
 744
 745 define Device/netgear_srs60
 746         $(call Device/netgear_srx60)
 747         DEVICE_MODEL := SRS60
 748         NETGEAR_BOARD_ID := SRS60
 749 endef
 750 TARGET_DEVICES += netgear_srs60
 751
 752 define Device/netgear_wac510
 753         $(call Device/FitImage)
 754         $(call Device/UbiFit)
 755         DEVICE_VENDOR := Netgear
 756         DEVICE_MODEL := WAC510
 757         SOC := qcom-ipq4018
 758         DEVICE_DTS_CONFIG := config@5
 759         BLOCKSIZE := 128k
 760         PAGESIZE := 2048
 761         IMAGES += nand-factory.tar
 762         IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
 763         DEVICE_PACKAGES := uboot-envtools
 764 endef
 765 TARGET_DEVICES += netgear_wac510
 766
 767 define Device/openmesh_a42
 768         $(call Device/FitImageLzma)
 769         DEVICE_VENDOR := OpenMesh
 770         DEVICE_MODEL := A42
 771         SOC := qcom-ipq4018
 772         DEVICE_DTS_CONFIG := config@om.a42
 773         BLOCKSIZE := 64k
 774         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 775         IMAGE_SIZE := 15616k
 776         IMAGES += factory.bin
 777         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 778         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 779 endef
 780 TARGET_DEVICES += openmesh_a42
 781
 782 define Device/openmesh_a62
 783         $(call Device/FitImageLzma)
 784         DEVICE_VENDOR := OpenMesh
 785         DEVICE_MODEL := A62
 786         SOC := qcom-ipq4019
 787         DEVICE_DTS_CONFIG := config@om.a62
 788         BLOCKSIZE := 64k
 789         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 790         IMAGE_SIZE := 15552k
 791         IMAGES += factory.bin
 792         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 793         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 794         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 795 endef
 796 TARGET_DEVICES += openmesh_a62
 797
 798 define Device/p2w_r619ac
 799         $(call Device/FitzImage)
 800         $(call Device/UbiFit)
 801         DEVICE_VENDOR := P&W
 802         DEVICE_MODEL := R619AC
 803         SOC := qcom-ipq4019
 804         DEVICE_DTS_CONFIG := config@10
 805         BLOCKSIZE := 128k
 806         PAGESIZE := 2048
 807         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 808 endef
 809
 810 define Device/p2w_r619ac-64m
 811         $(call Device/p2w_r619ac)
 812         DEVICE_VARIANT := 64M NAND
 813         IMAGES += nand-factory.bin
 814         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 815 endef
 816 TARGET_DEVICES += p2w_r619ac-64m
 817
 818 define Device/p2w_r619ac-128m
 819         $(call Device/p2w_r619ac)
 820         DEVICE_VARIANT := 128M NAND
 821 endef
 822 TARGET_DEVICES += p2w_r619ac-128m
 823
 824 define Device/plasmacloud_pa1200
 825         $(call Device/FitImageLzma)
 826         DEVICE_VENDOR := Plasma Cloud
 827         DEVICE_MODEL := PA1200
 828         SOC := qcom-ipq4018
 829         DEVICE_DTS_CONFIG := config@pc.pa1200
 830         BLOCKSIZE := 64k
 831         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 832         IMAGE_SIZE := 15616k
 833         IMAGES += factory.bin
 834         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 835         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 836         DEVICE_PACKAGES := ipq-wifi-plasmacloud_pa1200
 837 endef
 838 TARGET_DEVICES += plasmacloud_pa1200
 839
 840 define Device/plasmacloud_pa2200
 841         $(call Device/FitImageLzma)
 842         DEVICE_VENDOR := Plasma Cloud
 843         DEVICE_MODEL := PA2200
 844         SOC := qcom-ipq4019
 845         DEVICE_DTS_CONFIG := config@pc.pa2200
 846         BLOCKSIZE := 64k
 847         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 848         IMAGE_SIZE := 15552k
 849         IMAGES += factory.bin
 850         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 851         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 852         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud_pa2200
 853 endef
 854 TARGET_DEVICES += plasmacloud_pa2200
 855
 856 define Device/qcom_ap-dk01.1-c1
 857         DEVICE_VENDOR := Qualcomm Atheros
 858         DEVICE_MODEL := AP-DK01.1
 859         DEVICE_VARIANT := C1
 860         BOARD_NAME := ap-dk01.1-c1
 861         SOC := qcom-ipq4019
 862         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 863         KERNEL_INSTALL := 1
 864         KERNEL_SIZE := 4096k
 865         IMAGE_SIZE := 26624k
 866         $(call Device/FitImage)
 867         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 868         DEFAULT := n
 869 endef
 870 TARGET_DEVICES += qcom_ap-dk01.1-c1
 871
 872 define Device/qcom_ap-dk04.1-c1
 873         $(call Device/FitImage)
 874         $(call Device/UbiFit)
 875         DEVICE_VENDOR := Qualcomm Atheros
 876         DEVICE_MODEL := AP-DK04.1
 877         DEVICE_VARIANT := C1
 878         SOC := qcom-ipq4019
 879         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 880         KERNEL_INSTALL := 1
 881         KERNEL_SIZE := 4048k
 882         BLOCKSIZE := 128k
 883         PAGESIZE := 2048
 884         BOARD_NAME := ap-dk04.1-c1
 885         DEFAULT := n
 886 endef
 887 TARGET_DEVICES += qcom_ap-dk04.1-c1
 888
 889 define Device/qxwlan_e2600ac-c1
 890         $(call Device/FitImage)
 891         DEVICE_VENDOR := Qxwlan
 892         DEVICE_MODEL := E2600AC
 893         DEVICE_VARIANT := C1
 894         BOARD_NAME := e2600ac-c1
 895         SOC := qcom-ipq4019
 896         KERNEL_SIZE := 4096k
 897         IMAGE_SIZE := 31232k
 898         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 899         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 900         DEFAULT := n
 901 endef
 902 TARGET_DEVICES += qxwlan_e2600ac-c1
 903
 904 define Device/qxwlan_e2600ac-c2
 905         $(call Device/FitImage)
 906         $(call Device/UbiFit)
 907         DEVICE_VENDOR := Qxwlan
 908         DEVICE_MODEL := E2600AC
 909         DEVICE_VARIANT := C2
 910         SOC := qcom-ipq4019
 911         KERNEL_INSTALL := 1
 912         BLOCKSIZE := 128k
 913         PAGESIZE := 2048
 914         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 915 endef
 916 TARGET_DEVICES += qxwlan_e2600ac-c2
 917
 918 define Device/teltonika_rutx10
 919         $(call Device/FitImage)
 920         $(call Device/UbiFit)
 921         DEVICE_VENDOR := Teltonika
 922         DEVICE_MODEL := RUTX10
 923         SOC := qcom-ipq4018
 924         DEVICE_DTS_CONFIG := config@5
 925         KERNEL_INSTALL := 1
 926         BLOCKSIZE := 128k
 927         PAGESIZE := 2048
 928         FILESYSTEMS := squashfs
 929         IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
 930         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
 931 endef
 932 TARGET_DEVICES += teltonika_rutx10
 933
 934 define Device/unielec_u4019-32m
 935         $(call Device/FitImage)
 936         DEVICE_VENDOR := Unielec
 937         DEVICE_MODEL := U4019
 938         DEVICE_VARIANT := 32M
 939         BOARD_NAME := u4019-32m
 940         SOC := qcom-ipq4019
 941         KERNEL_SIZE := 4096k
 942         IMAGE_SIZE := 31232k
 943         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 944         DEFAULT := n
 945 endef
 946 TARGET_DEVICES += unielec_u4019-32m
 947
 948 define Device/zyxel_nbg6617
 949         $(call Device/FitImageLzma)
 950         DEVICE_VENDOR := ZyXEL
 951         DEVICE_MODEL := NBG6617
 952         SOC := qcom-ipq4018
 953         KERNEL_SIZE := 4096k
 954         ROOTFS_SIZE := 24960k
 955         RAS_BOARD := NBG6617
 956         RAS_ROOTFS_SIZE := 19840k
 957         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 958         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 959         IMAGES += factory.bin
 960 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 961 #       at least as large as the one of the initial firmware image (not the current
 962 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
 963 #       this minimum-size. However, the larger image can be flashed both ways.
 964         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 965         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 966         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 967 endef
 968 TARGET_DEVICES += zyxel_nbg6617
 969
 970 define Device/zyxel_wre6606
 971         $(call Device/FitImage)
 972         DEVICE_VENDOR := ZyXEL
 973         DEVICE_MODEL := WRE6606
 974         DEVICE_DTS_CONFIG := config@4
 975         SOC := qcom-ipq4018
 976         IMAGE_SIZE := 13184k
 977         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 978         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 979 endef
 980 TARGET_DEVICES += zyxel_wre6606