projects / openwrt / staging / chunkeey.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
ipq40xx: remove support for kernel 4.19
[openwrt/staging/chunkeey.git] / target / linux / ipq806x / files-4.19 / arch / arm / boot / dts / qcom-ipq8065-r7800.dts
1 #include "qcom-ipq8065.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 model = "Netgear Nighthawk X4S R7800";
7 compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
8
9 memory@0 {
10 reg = <0x42000000 0x1e000000>;
11 device_type = "memory";
12 };
13
14 reserved-memory {
15 #address-cells = <1>;
16 #size-cells = <1>;
17 ranges;
18 rsvd@41200000 {
19 reg = <0x41200000 0x300000>;
20 no-map;
21 };
22
23 rsvd@5fe00000 {
24 reg = <0x5fe00000 0x200000>;
25 reusable;
26 };
27 };
28
29 aliases {
30 serial0 = &gsbi4_serial;
31 mdio-gpio0 = &mdio0;
32
33 led-boot = &power_white;
34 led-failsafe = &power_amber;
35 led-running = &power_white;
36 led-upgrade = &power_amber;
37 label-mac-device = &gmac2;
38 };
39
40 chosen {
41 stdout-path = "serial0:115200n8";
42 };
43
44 soc {
45 pinmux@800000 {
46 button_pins: button_pins {
47 mux {
48 pins = "gpio6", "gpio54", "gpio65";
49 function = "gpio";
50 drive-strength = <2>;
51 bias-pull-up;
52 };
53 };
54
55 i2c4_pins: i2c4_pinmux {
56 mux {
57 pins = "gpio12", "gpio13";
58 function = "gsbi4";
59 drive-strength = <12>;
60 bias-disable;
61 };
62 };
63
64 led_pins: led_pins {
65 pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
66 "gpio24","gpio26", "gpio53", "gpio64";
67 function = "gpio";
68 drive-strength = <2>;
69 bias-pull-down;
70 };
71
72 nand_pins: nand_pins {
73 disable {
74 pins = "gpio34", "gpio35", "gpio36",
75 "gpio37", "gpio38";
76 function = "nand";
77 drive-strength = <10>;
78 bias-disable;
79 };
80
81 pullups {
82 pins = "gpio39";
83 function = "nand";
84 drive-strength = <10>;
85 bias-pull-up;
86 };
87
88 hold {
89 pins = "gpio40", "gpio41", "gpio42",
90 "gpio43", "gpio44", "gpio45",
91 "gpio46", "gpio47";
92 function = "nand";
93 drive-strength = <10>;
94 bias-bus-hold;
95 };
96 };
97
98 mdio0_pins: mdio0_pins {
99 mux {
100 pins = "gpio0", "gpio1";
101 function = "gpio";
102 drive-strength = <8>;
103 bias-disable;
104 };
105
106 clk {
107 pins = "gpio1";
108 input-disable;
109 };
110 };
111
112 rgmii2_pins: rgmii2_pins {
113 mux {
114 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
115 "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
116 function = "rgmii2";
117 drive-strength = <8>;
118 bias-disable;
119 };
120
121 tx {
122 pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
123 input-disable;
124 };
125 };
126
127 spi_pins: spi_pins {
128 mux {
129 pins = "gpio18", "gpio19", "gpio21";
130 function = "gsbi5";
131 bias-pull-down;
132 };
133
134 data {
135 pins = "gpio18", "gpio19";
136 drive-strength = <10>;
137 };
138
139 cs {
140 pins = "gpio20";
141 drive-strength = <10>;
142 bias-pull-up;
143 };
144
145 clk {
146 pins = "gpio21";
147 drive-strength = <12>;
148 };
149 };
150
151 spi6_pins: spi6_pins {
152 mux {
153 pins = "gpio55", "gpio56", "gpio58";
154 function = "gsbi6";
155 bias-pull-down;
156 };
157
158 mosi {
159 pins = "gpio55";
160 drive-strength = <12>;
161 };
162
163 miso {
164 pins = "gpio56";
165 drive-strength = <14>;
166 };
167
168 cs {
169 pins = "gpio57";
170 drive-strength = <12>;
171 bias-pull-up;
172 };
173
174 clk {
175 pins = "gpio58";
176 drive-strength = <12>;
177 };
178
179 reset {
180 pins = "gpio33";
181 drive-strength = <10>;
182 bias-pull-down;
183 output-high;
184 };
185 };
186
187 usb0_pwr_en_pins: usb0_pwr_en_pins {
188 mux {
189 pins = "gpio15";
190 function = "gpio";
191 drive-strength = <12>;
192 bias-pull-down;
193 output-high;
194 };
195 };
196
197 usb1_pwr_en_pins: usb1_pwr_en_pins {
198 mux {
199 pins = "gpio16", "gpio68";
200 function = "gpio";
201 drive-strength = <12>;
202 bias-pull-down;
203 output-high;
204 };
205 };
206 };
207
208 gsbi@16300000 {
209 qcom,mode = <GSBI_PROT_I2C_UART>;
210 status = "okay";
211 serial@16340000 {
212 status = "okay";
213 };
214 /*
215 * The i2c device on gsbi4 should not be enabled.
216 * On ipq806x designs gsbi4 i2c is meant for exclusive
217 * RPM usage. Turning this on in kernel manifests as
218 * i2c failure for the RPM.
219 */
220 };
221
222 sata-phy@1b400000 {
223 status = "okay";
224 };
225
226 sata@29000000 {
227 ports-implemented = <0x1>;
228 status = "okay";
229 };
230
231 usb3_0: usb3@110f8800 {
232 status = "okay";
233
234 pinctrl-0 = <&usb0_pwr_en_pins>;
235 pinctrl-names = "default";
236 };
237
238 usb3_1: usb3@100f8800 {
239 status = "okay";
240
241 pinctrl-0 = <&usb1_pwr_en_pins>;
242 pinctrl-names = "default";
243 };
244
245 pcie0: pci@1b500000 {
246 status = "okay";
247
248 bridge@0,0 {
249 reg = <0x00000000 0 0 0 0>;
250 #address-cells = <3>;
251 #size-cells = <2>;
252 ranges;
253
254 wifi@1,0 {
255 compatible = "pci168c,0046";
256 reg = <0x00010000 0 0 0 0>;
257
258 mtd-mac-address = <&art 6>;
259 mtd-mac-address-increment = <(1)>;
260 };
261 };
262 };
263
264 pcie1: pci@1b700000 {
265 status = "okay";
266 force_gen1 = <1>;
267
268 bridge@0,0 {
269 reg = <0x00000000 0 0 0 0>;
270 #address-cells = <3>;
271 #size-cells = <2>;
272 ranges;
273
274 wifi@1,0 {
275 compatible = "pci168c,0046";
276 reg = <0x00010000 0 0 0 0>;
277
278 mtd-mac-address = <&art 6>;
279 mtd-mac-address-increment = <(2)>;
280 };
281 };
282 };
283
284 nand@1ac00000 {
285 status = "okay";
286
287 pinctrl-0 = <&nand_pins>;
288 pinctrl-names = "default";
289
290 cs0 {
291 reg = <0>;
292 compatible = "qcom,nandcs";
293
294 nand-ecc-strength = <4>;
295 nand-bus-width = <8>;
296 nand-ecc-step-size = <512>;
297
298 partitions {
299 compatible = "fixed-partitions";
300 #address-cells = <1>;
301 #size-cells = <1>;
302
303 qcadata@0 {
304 label = "qcadata";
305 reg = <0x0000000 0x0c80000>;
306 read-only;
307 };
308
309 APPSBL@c80000 {
310 label = "APPSBL";
311 reg = <0x0c80000 0x0500000>;
312 read-only;
313 };
314
315 APPSBLENV@1180000 {
316 label = "APPSBLENV";
317 reg = <0x1180000 0x0080000>;
318 read-only;
319 };
320
321 art: art@1200000 {
322 label = "art";
323 reg = <0x1200000 0x0140000>;
324 read-only;
325 };
326
327 artbak: art@1340000 {
328 label = "artbak";
329 reg = <0x1340000 0x0140000>;
330 read-only;
331 };
332
333 kernel@1480000 {
334 label = "kernel";
335 reg = <0x1480000 0x0400000>;
336 };
337
338 ubi@1880000 {
339 label = "ubi";
340 reg = <0x1880000 0x6080000>;
341 };
342
343 reserve@7900000 {
344 label = "reserve";
345 reg = <0x7900000 0x0700000>;
346 read-only;
347 };
348 };
349 };
350 };
351
352 mdio0: mdio {
353 compatible = "virtual,mdio-gpio";
354 #address-cells = <1>;
355 #size-cells = <0>;
356 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
357 <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
358 pinctrl-0 = <&mdio0_pins>;
359 pinctrl-names = "default";
360
361
362 phy0: ethernet-phy@0 {
363 reg = <0>;
364 qca,ar8327-initvals = <
365 0x00004 0x7600000 /* PAD0_MODE */
366 0x00008 0x1000000 /* PAD5_MODE */
367 0x0000c 0x80 /* PAD6_MODE */
368 0x000e4 0xaa545 /* MAC_POWER_SEL */
369 0x000e0 0xc74164de /* SGMII_CTRL */
370 0x0007c 0x4e /* PORT0_STATUS */
371 0x00094 0x4e /* PORT6_STATUS */
372 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
373 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
374 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
375 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
376 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
377 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
378 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
379 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
380 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
381 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
382 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
383 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
384 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
385 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
386 >;
387 qca,ar8327-vlans = <
388 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
389 0x2 0x21 /* VLAN2 Ports 0/5 */
390 >;
391 };
392
393 phy4: ethernet-phy@4 {
394 reg = <4>;
395 qca,ar8327-initvals = <
396 0x000e4 0x6a545 /* MAC_POWER_SEL */
397 0x0000c 0x80 /* PAD6_MODE */
398 >;
399 };
400 };
401
402 gmac1: ethernet@37200000 {
403 status = "okay";
404 phy-mode = "rgmii";
405 qcom,id = <1>;
406 qcom,phy_mdio_addr = <4>;
407 qcom,poll_required = <0>;
408 qcom,rgmii_delay = <1>;
409 qcom,phy_mii_type = <0>;
410 qcom,emulation = <0>;
411 qcom,irq = <255>;
412 mdiobus = <&mdio0>;
413
414 pinctrl-0 = <&rgmii2_pins>;
415 pinctrl-names = "default";
416
417 mtd-mac-address = <&art 6>;
418
419 fixed-link {
420 speed = <1000>;
421 full-duplex;
422 };
423 };
424
425 gmac2: ethernet@37400000 {
426 status = "okay";
427 phy-mode = "sgmii";
428 qcom,id = <2>;
429 qcom,phy_mdio_addr = <0>; /* none */
430 qcom,poll_required = <0>; /* no polling */
431 qcom,rgmii_delay = <0>;
432 qcom,phy_mii_type = <1>;
433 qcom,emulation = <0>;
434 qcom,irq = <258>;
435 mdiobus = <&mdio0>;
436
437 mtd-mac-address = <&art 0>;
438
439 fixed-link {
440 speed = <1000>;
441 full-duplex;
442 };
443 };
444 };
445
446 keys {
447 compatible = "gpio-keys";
448 pinctrl-0 = <&button_pins>;
449 pinctrl-names = "default";
450
451 wifi {
452 label = "wifi";
453 gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
454 linux,code = <KEY_RFKILL>;
455 debounce-interval = <60>;
456 wakeup-source;
457 };
458
459 reset {
460 label = "reset";
461 gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
462 linux,code = <KEY_RESTART>;
463 debounce-interval = <60>;
464 wakeup-source;
465 };
466
467 wps {
468 label = "wps";
469 gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
470 linux,code = <KEY_WPS_BUTTON>;
471 debounce-interval = <60>;
472 wakeup-source;
473 };
474 };
475
476 leds {
477 compatible = "gpio-leds";
478 pinctrl-0 = <&led_pins>;
479 pinctrl-names = "default";
480
481 power_white: power_white {
482 label = "white:power";
483 gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
484 default-state = "keep";
485 };
486
487 power_amber: power_amber {
488 label = "amber:power";
489 gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
490 };
491
492 wan_white {
493 label = "white:wan";
494 gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
495 };
496
497 wan_amber {
498 label = "amber:wan";
499 gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
500 };
501
502 usb1 {
503 label = "white:usb1";
504 gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
505 };
506
507 usb2 {
508 label = "white:usb2";
509 gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
510 };
511
512 esata {
513 label = "white:esata";
514 gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
515 };
516
517 wifi {
518 label = "white:wifi";
519 gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
520 };
521
522 wps {
523 label = "white:wps";
524 gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
525 };
526 };
527 };
528
529 &adm_dma {
530 status = "okay";
531 };
Staging tree of Christian Lamparter