3 #include <dt-bindings/input/input.h>
4 #include <dt-bindings/leds/common.h>
7 compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube";
11 bootargs = "console=ttyLTQ0,115200";
15 led-boot = &power_blue;
16 led-failsafe = &power_red;
17 led-running = &power_blue;
18 led-upgrade = &power_blue;
26 device_type = "memory";
27 reg = <0x0 0x2000000>;
31 compatible = "ath5k,eeprom";
32 ath,eep-flash = <&boardconfig 0x400>;
33 ath,mac-offset = <0x0>;
38 compatible = "gpio-keys-polled";
39 poll-interval = <100>;
43 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RFKILL>;
48 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_WPS_BUTTON>;
53 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
54 linux,code = <KEY_RESTART>;
59 compatible = "gpio-leds";
61 function = LED_FUNCTION_POWER;
62 color = <LED_COLOR_ID_BLUE>;
63 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
64 default-state = "keep";
68 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
72 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
75 function = LED_FUNCTION_POWER;
76 color = <LED_COLOR_ID_RED>;
77 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
80 function = LED_FUNCTION_WPS;
81 color = <LED_COLOR_ID_BLUE>;
82 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
85 function = LED_FUNCTION_WPS;
86 color = <LED_COLOR_ID_YELLOW>;
87 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
90 label = "blue:telefon1";
91 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
94 label = "blue:telefon2";
95 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
98 function = LED_FUNCTION_WPS;
99 color = <LED_COLOR_ID_RED>;
100 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
104 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
107 label = "blue:sprache";
108 gpios = <&gpiomm 4 1>;
111 function = LED_FUNCTION_USB;
112 color = <LED_COLOR_ID_BLUE>;
113 gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
116 function = LED_FUNCTION_WLAN;
117 color = <LED_COLOR_ID_BLUE>;
118 gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
121 internet blue and internet red are missing
122 dsl2 and dsl3 are not referenced in manual
125 label = "yellow:dsl";
126 gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
130 gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
134 usb_vbus: regulator-usb-vbus {
135 compatible = "regulator-fixed";
137 regulator-name = "USB_VBUS";
139 regulator-min-microvolt = <5000000>;
140 regulator-max-microvolt = <5000000>;
142 gpio = <&gpio 28 GPIO_ACTIVE_HIGH>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&state_default>;
151 state_default: pinmux {
153 lantiq,groups = "ebu cs1";
154 lantiq,function = "ebu";
157 lantiq,pins = "io21";
162 lantiq,pins = "io3", "io5", "io6", "io7", "io9";
169 #define ARV452CPW_SWITCH_RESET 110
173 nvmem-cells = <&macaddr_boardconfig_16>;
174 nvmem-cell-names = "mac-address";
179 compatible = "lantiq,nor";
181 reg = <0 0x0 0x400000>;
184 compatible = "fixed-partitions";
185 #address-cells = <1>;
190 reg = <0x00000 0x10000>;
195 label = "u-boot-env";
196 reg = <0x10000 0x10000>;
202 reg = <0x20000 0x3d0000>;
205 boardconfig: partition@3f0000 {
206 label = "boardconfig";
207 reg = <0x3f0000 0x10000>;
211 compatible = "fixed-layout";
212 #address-cells = <1>;
215 macaddr_boardconfig_16: macaddr@16 {
224 compatible = "lantiq,gpio-mm";
226 #address-cells = <1>;
230 lantiq,shadow = <0x77f>;
237 pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
238 pinctrl-names = "default";
240 lantiq,external-clock;
241 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
250 vbus-supply = <&usb_vbus>;
255 gpios = <&gpio 31 GPIO_ACTIVE_HIGH
256 &gpiomm 7 GPIO_ACTIVE_HIGH>;