target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "avm,fritz7430", "lantiq,xway", "lantiq,vr9";
  10         model = "AVM FRITZ!Box 7430";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &led_power;
  18                 led-failsafe = &led_info_red;
  19                 led-running = &led_power;
  20                 led-upgrade = &led_info_green;
  21
  22                 led-dsl = &led_info_green;
  23                 led-wifi = &led_wifi;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x8000000>;
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 dect {
  36                         label = "dect";
  37                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_PHONE>;
  39                 };
  40
  41                 wifi {
  42                         label = "wifi";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RFKILL>;
  45                 };
  46         };
  47
  48         leds {
  49                 compatible = "gpio-leds";
  50
  51                 led_power: power {
  52                         label = "green:power";
  53                         gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
  54                         default-state = "keep";
  55                 };
  56
  57                 led_info_green: info_green {
  58                         label = "green:info";
  59                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 led_info_red: info_red {
  63                         label = "red:info";
  64                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 led_wifi: wifi {
  68                         label = "green:wifi";
  69                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 dect {
  73                         label = "green:dect";
  74                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 fon {
  78                         label = "green:fon";
  79                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  80                 };
  81         };
  82
  83         usb0_vbus: regulator-usb0-vbus {
  84                 compatible = "regulator-fixed";
  85
  86                 regulator-name = "USB0_VBUS";
  87
  88                 regulator-min-microvolt = <5000000>;
  89                 regulator-max-microvolt = <5000000>;
  90
  91                 gpio = <&gpio 5 GPIO_ACTIVE_HIGH>;
  92                 enable-active-high;
  93         };
  94 };
  95
  96 &localbus {
  97         flash@0 {
  98                 compatible = "lantiq,nand-xway";
  99                 bank-width = <2>;
 100                 reg = <0 0x0 0x8000000>;
 101                 lantiq,cs = <1>;
 102
 103                 pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>;
 104                 pinctrl-names = "default";
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         partition@0 {
 112                                 label = "urlader";
 113                                 reg = <0x0 0x40000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@40000 {
 118                                 label = "nand-tffs";
 119                                 reg = <0x40000 0x400000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@440000 {
 124                                 label = "kernel";
 125                                 reg = <0x440000 0x400000>;
 126                         };
 127
 128                         partition@840000 {
 129                                 label = "ubi";
 130                                 reg = <0x840000 0x3000000>;
 131                         };
 132
 133                         partition@3840000 {
 134                                 label = "reserved-kernel";
 135                                 reg = <0x3840000 0x400000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@3c40000 {
 140                                 label = "reserved-filesystem";
 141                                 reg = <0x3c40000 0x3000000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@6c40000 {
 146                                 label = "config";
 147                                 reg = <0x6c40000 0x200000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@6e40000 {
 152                                 label = "nand-filesystem";
 153                                 reg = <0x6e40000 0x11c0000>;
 154                                 read-only;
 155                         };
 156                 };
 157         };
 158 };
 159
 160 &pcie0 {
 161         status = "okay";
 162
 163         gpio-reset = <&gpio 11 GPIO_ACTIVE_LOW>;
 164
 165         pcie@0 {
 166                 reg = <0 0 0 0 0>;
 167                 #interrupt-cells = <1>;
 168                 #size-cells = <2>;
 169                 #address-cells = <3>;
 170                 device_type = "pci";
 171
 172                 wifi@168c,abcd {
 173                         compatible = "pci168c,abcd";
 174                         reg = <0 0 0 0 0>;
 175                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 176                 };
 177         };
 178 };
 179
 180 &gphy0 {
 181         lantiq,gphy-mode = <GPHY_MODE_FE>;
 182 };
 183
 184 &gphy1 {
 185         lantiq,gphy-mode = <GPHY_MODE_FE>;
 186 };
 187
 188 &eth0 {
 189         interface@0 {
 190                 compatible = "lantiq,xrx200-pdi";
 191                 #address-cells = <1>;
 192                 #size-cells = <0>;
 193                 reg = <0>;
 194                 lantiq,switch;
 195
 196                 ethernet@2 {
 197                         compatible = "lantiq,xrx200-pdi-port";
 198                         reg = <2>;
 199                         phy-mode = "mii";
 200                         phy-handle = <&phy11>;
 201                 };
 202
 203                 ethernet@3 {
 204                         compatible = "lantiq,xrx200-pdi-port";
 205                         reg = <3>;
 206                         phy-mode = "mii";
 207                         phy-handle = <&phy12>;
 208                 };
 209
 210                 ethernet@4 {
 211                         compatible = "lantiq,xrx200-pdi-port";
 212                         reg = <4>;
 213                         phy-mode = "mii";
 214                         phy-handle = <&phy13>;
 215                 };
 216
 217                 ethernet@5 {
 218                         compatible = "lantiq,xrx200-pdi-port";
 219                         reg = <5>;
 220                         phy-mode = "mii";
 221                         phy-handle = <&phy14>;
 222                 };
 223         };
 224
 225         mdio {
 226                 #address-cells = <1>;
 227                 #size-cells = <0>;
 228                 compatible = "lantiq,xrx200-mdio";
 229
 230                 phy11: ethernet-phy@11 {
 231                         reg = <0x11>;
 232                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 233                 };
 234
 235                 phy12: ethernet-phy@12 {
 236                         reg = <0x12>;
 237                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 238                 };
 239
 240                 phy13: ethernet-phy@13 {
 241                         reg = <0x13>;
 242                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 243                 };
 244
 245                 phy14: ethernet-phy@14 {
 246                         reg = <0x14>;
 247                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 248                 };
 249         };
 250 };
 251
 252 &gpio {
 253         pinctrl-names = "default";
 254         pinctrl-0 = <&state_default>;
 255
 256         state_default: pinmux {
 257                 pcie-rst {
 258                         lantiq,pins = "io11";
 259                         lantiq,open-drain = <1>;
 260                         lantiq,output = <1>;
 261                 };
 262         };
 263 };
 264
 265 &usb_phy0 {
 266         status = "okay";
 267 };
 268
 269 &usb0 {
 270         status = "okay";
 271
 272         vbus-supply = <&usb0_vbus>;
 273 };