target/linux/mpc85xx/image/p1020.mk

   1 define Build/MultiImage
   2         rm -rf $@.fakerd $@.new
   3
   4         dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
   5
   6         -$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1)  \
   7                 -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
   8                 -d $@:$@.fakerd:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.new
   9         mv $@.new $@
  10         rm -rf $@.fakerd
  11 endef
  12
  13 define Device/aerohive_hiveap-330
  14   DEVICE_VENDOR := Aerohive
  15   DEVICE_MODEL := HiveAP-330
  16   DEVICE_ALT0_VENDOR := Aerohive
  17   DEVICE_ALT0_MODEL := HiveAP-350
  18   DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70
  19   BLOCKSIZE := 128k
  20   KERNEL := kernel-bin | uImage none
  21   KERNEL_INITRAMFS := kernel-bin | MultiImage none
  22   KERNEL_SIZE := 16m
  23   IMAGES := sysupgrade.bin
  24   IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
  25         append-rootfs | pad-rootfs | check-size | append-metadata
  26   IMAGE_SIZE = 63m
  27   DEVICE_COMPAT_VERSION := 2.0
  28   DEVICE_COMPAT_MESSAGE := \n$\
  29     !The partitioning of the HiveAP 330 has changed! \n$\
  30     To upgrade, please take a look at the install instructions over \
  31     at the device's wiki: <https://openwrt.org/toh/aerohive/hiveap-330> \n$\
  32     An abridged version for the console is provided here for comfort. \n$\
  33     Run the following script into a shell on the device and retry this \
  34     sysupgrade again: \n$\
  35     cat <<- "EOF" > /tmp/uboot-fix.sh; sh /tmp/uboot-fix.sh \n$\
  36     . /lib/functions.sh \n$\
  37     . /lib/functions/system.sh \n$\
  38     opkg update && opkg install uboot-envtools kmod-mtd-rw || exit 2 \n$\
  39     insmod mtd-rw i_want_a_brick=y || exit 3 \n$\
  40     echo "/dev/mtd$$$$(find_mtd_index u-boot-env) 0x0 0x20000 0x10000" > "/etc/fw_env.config" \n$\
  41     fw_setenv owrt_boot 'setenv bootargs console=ttyS0,9600;bootm 0xEC040000 - 0xEC000000' \n$\
  42     cp "/dev/mtd$$$$(find_mtd_index 'u-boot')" /tmp/uboot \n$\
  43     cp /tmp/uboot /tmp/uboot_patched \n$\
  44     strings -td < /tmp/uboot | grep '^ *[0-9]* *\\(run owrt_boot\\|setenv bootargs\\).*cp\\.l' | \n$\
  45        awk '{print $$$$1}' | \n$\
  46        while read offset; do \n$\
  47          echo -n "run owrt_boot;            " | dd of=/tmp/uboot_patched bs=1 seek=$$$${offset} conv=notrunc \n$\
  48        done \n$\
  49        mtd write /tmp/uboot_patched u-boot \n$\
  50        uci set system.@system[0].compat_version=2.0; uci commit; \n$\
  51     EOF \n$\
  52     \n$\
  53     Note that if this fails, you will need to use the serial console \n$\
  54     to re-install OpenWrt. \n$\
  55     Note that after this sysupgrade, the AP will be unavailable for 7 \n$\
  56     minutes to reformat flash."
  57
  58 endef
  59 TARGET_DEVICES += aerohive_hiveap-330
  60
  61 define Device/enterasys_ws-ap3710i
  62   DEVICE_VENDOR := Enterasys
  63   DEVICE_MODEL := WS-AP3710i
  64   BLOCKSIZE := 128k
  65   KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
  66   IMAGES := sysupgrade.bin
  67   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  68 endef
  69 TARGET_DEVICES += enterasys_ws-ap3710i
  70
  71 define Device/extreme-networks_ws-ap3825i
  72   DEVICE_VENDOR := Extreme Networks
  73   DEVICE_MODEL := WS-AP3825i
  74   DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
  75   BLOCKSIZE := 128k
  76   KERNEL_NAME := simpleImage.ws-ap3825i
  77   KERNEL_ENTRY := 0x1000000
  78   KERNEL_LOADADDR := 0x1000000
  79   KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
  80   IMAGES := sysupgrade.bin
  81   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
  82 endef
  83 TARGET_DEVICES += extreme-networks_ws-ap3825i
  84
  85 define Device/ocedo_panda
  86   DEVICE_VENDOR := OCEDO
  87   DEVICE_MODEL := Panda
  88   DEVICE_PACKAGES := kmod-rtc-ds1307
  89   KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
  90   PAGESIZE := 2048
  91   SUBPAGESIZE := 512
  92   BLOCKSIZE := 128k
  93   IMAGES := fdt.bin sysupgrade.bin
  94   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  95   IMAGE/fdt.bin := append-dtb
  96 endef
  97 TARGET_DEVICES += ocedo_panda
  98