target/linux/ramips/dts/ARGUS_ATP52B.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ARGUS_ATP52B", "ralink,rt3052-soc";
   7         model = "Argus ATP-52B";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "bootloader";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "config";
  35                         reg = <0x30000 0x10000>;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                 };
  42
  43                 partition@50000 {
  44                         label = "firmware";
  45                         reg = <0x50000 0x7a0000>;
  46                 };
  47         };
  48
  49         gpio-leds {
  50                 compatible = "gpio-leds";
  51                 run {
  52                         label = "argus-atp52b:green:run";
  53                         gpios = <&gpio0 9 1>;
  54                 };
  55                 net {
  56                         label = "argus-atp52b:amber:net";
  57                         gpios = <&gpio0 13 1>;
  58                 };
  59         };
  60
  61         gpio-keys-polled {
  62                 compatible = "gpio-keys-polled";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 poll-interval = <20>;
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio0 0 1>;
  69                         linux,code = <0x211>;
  70                 };
  71                 reset {
  72                         label = "reset";
  73                         gpios = <&gpio0 10 1>;
  74                         linux,code = <0x198>;
  75                 };
  76         };
  77
  78         esw@10110000 {
  79                 ralink,portmap = <0x3e>;
  80         };
  81
  82         otg@101c0000 {
  83                 status = "okay";
  84         };
  85 };