target/linux/ramips/dts/DCS-930L-B1.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "dlink,dcs-930l-b1", "ralink,rt5350-soc";
  10         model = "D-Link DCS-930L B1";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "dcs-930l-b1:red:power";
  21                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wps {
  25                         label = "dcs-930l-b1:blue:wps";
  26                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <20>;
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41
  42                 wps {
  43                         label = "wps";
  44                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_WPS_BUTTON>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 spi-max-frequency = <10000000>;
  59
  60                 partition@0 {
  61                         label = "u-boot";
  62                         reg = <0x0 0x30000>;
  63                         read-only;
  64                 };
  65
  66                 partition@30000 {
  67                         label = "u-boot-env";
  68                         reg = <0x30000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 factory: partition@40000 {
  73                         label = "factory";
  74                         reg = <0x40000 0x10000>;
  75                         read-only;
  76                 };
  77
  78                 partition@50000 {
  79                         label = "firmware";
  80                         reg = <0x50000 0x3b0000>;
  81                 };
  82         };
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 gpio {
  88                         ralink,group = "i2c", "jtag", "uartf", "led";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };
  93
  94 &ethernet {
  95         mtd-mac-address = <&factory 0x4>;
  96 };
  97
  98 &esw {
  99         mediatek,portmap = <0x2f>;
 100 };
 101
 102 &wmac {
 103         ralink,mtd-eeprom = <&factory 0>;
 104 };
 105
 106 &ehci {
 107         status = "okay";
 108 };
 109
 110 &ohci {
 111         status = "okay";
 112 };