target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "FONERA20N", "ralink,rt3052-soc";
   7         model = "La Fonera 2.0N";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,7872k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27
  28         };
  29
  30         cfi@1f000000 {
  31                 compatible = "cfi-flash";
  32                 reg = <0x1f000000 0x800000>;
  33
  34                 bank-width = <2>;
  35                 device-width = <2>;
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42                 wifi {
  43                         label = "fonera20n:orange:wifi";
  44                         gpios = <&gpio0 7 1>;
  45                 };
  46                 power {
  47                         label = "fonera20n:green:power";
  48                         gpios = <&gpio0 9 1>;
  49                 };
  50                 usb {
  51                         label = "fonera20n:orange:usb";
  52                         gpios = <&gpio0 14 1>;
  53                 };
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <20>;
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 12 1>;
  64                         linux,code = <0x198>;
  65                 };
  66                 switch {
  67                         label = "switch";
  68                         gpios = <&gpio0 13 1>;
  69                         linux,code = <0x101>;
  70                 };
  71         };
  72
  73         ethernet@10100000 {
  74                 status = "okay";
  75         };
  76
  77         esw@10110000 {
  78                 status = "okay";
  79                 ralink,portmap = <0x2f>;
  80
  81                 port@0 {
  82                         conpatible = "swconfig,port";
  83                         swconfig,segment = "lan";
  84                         swconfig,portmap = <0 4>;
  85                 };
  86                 port@1 {
  87                         conpatible = "swconfig,port";
  88                         swconfig,segment = "lan";
  89                         swconfig,portmap = <1 3>;
  90                 };
  91                 port@2 {
  92                         conpatible = "swconfig,port";
  93                         swconfig,segment = "lan";
  94                         swconfig,portmap = <2 2>;
  95                 };
  96                 port@3 {
  97                         conpatible = "swconfig,port";
  98                         swconfig,segment = "lan";
  99                         swconfig,portmap = <3 1>;
 100                 };
 101                 port@4 {
 102                         conpatible = "swconfig,port";
 103                         swconfig,segment = "lan";
 104                         swconfig,portmap = <4 0>;
 105                 };
 106         };
 107
 108         wmac@10180000 {
 109                 status = "okay";
 110         };
 111
 112         otg@101c0000 {
 113                 status = "okay";
 114         };
 115 };