ramips/rt288x,rt3883: Name DTS files based on scheme
[openwrt/openwrt.git] / target / linux / ramips / dts / JHR-N926R.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "jcg,jhr-n926r", "ralink,rt3052-soc";
10 model = "JCG JHR-N926R";
11
12 aliases {
13 led-boot = &led_system;
14 led-failsafe = &led_system;
15 led-running = &led_system;
16 led-upgrade = &led_system;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x800000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 compatible = "denx,uimage";
50 label = "firmware";
51 reg = <0x50000 0x3b0000>;
52 };
53 };
54 };
55
56 leds {
57 compatible = "gpio-leds";
58
59 wlan1 {
60 label = "jhr-n926r:red:wlan";
61 gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
62 };
63
64 wlan2 {
65 label = "jhr-n926r:yellow:wlan";
66 gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
67 };
68
69 wlan3 {
70 label = "jhr-n926r:green:wlan";
71 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
72 };
73
74 led_system: system {
75 label = "jhr-n926r:blue:system";
76 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
77 };
78 };
79
80 gpio_export {
81 compatible = "gpio-export";
82 #size-cells = <0>;
83
84 display_data {
85 gpio-export,name = "display_data";
86 gpio-export,output = <1>;
87 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
88 };
89
90 display_clock {
91 gpio-export,name = "display_clock";
92 gpio-export,output = <1>;
93 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
94 };
95
96 display_blank {
97 gpio-export,name = "display_blank";
98 gpio-export,output = <1>;
99 gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
100 };
101 };
102
103 keys {
104 compatible = "gpio-keys-polled";
105 poll-interval = <20>;
106
107 reset_wps {
108 label = "reset_wps";
109 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
110 linux,code = <KEY_RESTART>;
111 };
112
113 wlan {
114 label = "wlan";
115 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
116 linux,code = <BTN_0>;
117 };
118 };
119 };
120
121 &pinctrl {
122 state_default: pinctrl0 {
123 gpio {
124 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
125 ralink,function = "gpio";
126 };
127 };
128 };
129
130 &ethernet {
131 mtd-mac-address = <&factory 0x2e>;
132 };
133
134 &esw {
135 mediatek,portmap = <0x3e>;
136 };
137
138 &wmac {
139 ralink,mtd-eeprom = <&factory 0>;
140 };