target/linux/ramips/dts/PSR-680W.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "PSR-680W", "ralink,rt3052-soc";
   7         model = "Petatel PSR-680W Wireless 3G Router";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "uartlite", "sdram";
  16                         ralink,gpiomux = "spi", "jtag", "mdio", "rgmii";
  17                         ralink,uartmux = "i2s uartf";
  18                         ralink,wdtmux = <1>;
  19                 };
  20
  21                 gpio0: gpio@600 {
  22                         status = "okay";
  23                 };
  24         };
  25
  26         cfi@1f000000 {
  27                 compatible = "cfi-flash";
  28                 reg = <0x1f000000 0x800000>;
  29
  30                 bank-width = <2>;
  31                 device-width = <2>;
  32                 #address-cells = <1>;
  33                 #size-cells = <1>;
  34
  35                 partition@0 {
  36                         label = "u-boot";
  37                         reg = <0x0 0x30000>;
  38                         read-only;
  39                 };
  40
  41                 partition@30000 {
  42                         label = "u-boot-env";
  43                         reg = <0x30000 0x10000>;
  44                         read-only;
  45                 };
  46
  47                 factory: partition@40000 {
  48                         label = "factory";
  49                         reg = <0x40000 0x10000>;
  50                         read-only;
  51                 };
  52
  53                 partition@50000 {
  54                         label = "firmware";
  55                         reg = <0x50000 0x3b0000>;
  56                 };
  57         };
  58
  59         ethernet@10100000 {
  60                 status = "okay";
  61         };
  62
  63         esw@10110000 {
  64                 status = "okay";
  65                 ralink,portmap = <0x3e>;
  66         };
  67
  68         gpio-leds {
  69                 compatible = "gpio-leds";
  70                 wan {
  71                         label = "psr-680w:red:wan";
  72                         gpios = <&gpio0 19 1>;
  73                 };
  74         };
  75
  76         gpio-keys-polled {
  77                 compatible = "gpio-keys-polled";
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80                 poll-interval = <20>;
  81                 reset {
  82                         label = "reset";
  83                         gpios = <&gpio0 0 1>;
  84                         linux,code = <0x198>;
  85                 };
  86         };
  87
  88         wmac@10180000 {
  89                 status = "okay";
  90         };
  91
  92         otg@101c0000 {
  93                 status = "okay";
  94         };
  95 };