ramips: soc wmac eeprom cleanup
[openwrt/openwrt.git] / target / linux / ramips / dts / UR-326N4G.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6 compatible = "UR-326N4G", "ralink,rt3052-soc";
7 model = "UR-326N4G Wireless N router";
8
9 pinctrl {
10 state_default: pinctrl0 {
11 gpio {
12 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
13 ralink,function = "gpio";
14 };
15 };
16 };
17
18 cfi@1f000000 {
19 compatible = "cfi-flash";
20 reg = <0x1f000000 0x800000>;
21
22 bank-width = <2>;
23 device-width = <2>;
24 #address-cells = <1>;
25 #size-cells = <1>;
26
27 partition@0 {
28 label = "u-boot";
29 reg = <0x0 0x30000>;
30 read-only;
31 };
32
33 partition@30000 {
34 label = "u-boot-env";
35 reg = <0x30000 0x10000>;
36 read-only;
37 };
38
39 factory: partition@40000 {
40 label = "factory";
41 reg = <0x40000 0x10000>;
42 read-only;
43 };
44
45 partition@50000 {
46 label = "firmware";
47 reg = <0x50000 0x3b0000>;
48 };
49 };
50
51 ethernet@10100000 {
52 mtd-mac-address = <&factory 0x4004>;
53 };
54
55 esw@10110000 {
56 ralink,portmap = <0x2f>;
57 };
58
59 wmac@10180000 {
60 ralink,mtd-eeprom = <&factory 0>;
61 };
62
63 gpio-leds {
64 compatible = "gpio-leds";
65 3g {
66 label = "ur326:green:3g";
67 gpios = <&gpio0 9 1>;
68 };
69 gateway {
70 label = "ur326:green:gateway";
71 gpios = <&gpio0 11 1>;
72 };
73 ap {
74 label = "ur326:green:ap";
75 gpios = <&gpio0 12 1>;
76 };
77 wps {
78 label = "ur326:green:wps";
79 gpios = <&gpio0 14 1>;
80 };
81 station {
82 label = "ur326:green:station";
83 gpios = <&gpio0 13 1>;
84 };
85 };
86
87 gpio-keys-polled {
88 compatible = "gpio-keys-polled";
89 #address-cells = <1>;
90 #size-cells = <0>;
91 poll-interval = <20>;
92 reset_wps {
93 label = "reset_wps";
94 gpios = <&gpio0 10 1>;
95 linux,code = <0x198>;
96 };
97 mode {
98 label = "mode";
99 gpios = <&gpio0 7 1>;
100 linux,code = <0x32>;
101 };
102 };
103
104 otg@101c0000 {
105 status = "okay";
106 };
107 };