target/linux/ramips/dts/VAR11N-300.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
  10         model = "Vonets VAR11N-300";
  11
  12         aliases {
  13                 led-status = &led_system;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_system: system {
  20                         label = "var11n-300:blue:system";
  21                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36         };
  37 };
  38
  39 &gpio0 {
  40         status = "okay";
  41 };
  42
  43 &spi0 {
  44         status = "okay";
  45
  46         m25p80@0 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "jedec,spi-nor";
  50                 reg = <0>;
  51                 spi-max-frequency = <10000000>;
  52
  53                 partition@0 {
  54                         label = "u-boot";
  55                         reg = <0x0 0x30000>;
  56                         read-only;
  57                 };
  58
  59                 partition@30000 {
  60                         label = "u-boot-env";
  61                         reg = <0x30000 0x10000>;
  62                         read-only;
  63                 };
  64
  65                 factory: partition@40000 {
  66                         label = "factory";
  67                         reg = <0x40000 0x10000>;
  68                         read-only;
  69                 };
  70
  71                 partition@50000 {
  72                         label = "firmware";
  73                         reg = <0x50000 0x3b0000>;
  74                 };
  75         };
  76 };
  77
  78 &ethernet {
  79         mtd-mac-address = <&factory 0x4>;
  80         mediatek,portmap = "llllw";
  81 };
  82
  83 &wmac {
  84         ralink,mtd-eeprom = <&factory 0>;
  85 };
  86
  87 &pinctrl {
  88         state_default: pinctrl0 {
  89                 default {
  90                         ralink,group = "i2c";
  91                         ralink,function = "gpio";
  92                 };
  93         };
  94 };