target/linux/ramips/dts/mt7620a_netis_wf2770.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netis,wf2770", "ralink,mt7620a-soc";
  10         model = "NETIS WF2770";
  11
  12         leds {
  13                 compatible = "gpio-leds";
  14
  15                 wlan {
  16                         label = "blue:wlan";
  17                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  18                         linux,default-trigger = "phy0tpt";
  19                 };
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 reset {
  26                         label = "reset";
  27                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30
  31                 wps {
  32                         label = "wps";
  33                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                 };
  36
  37                 rfkill {
  38                         label = "rfkill";
  39                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  40                         linux,code = <KEY_RFKILL>;
  41                 };
  42
  43                 led-toggle {
  44                         label = "led-toggle";
  45                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_LIGHTS_TOGGLE>;
  47                 };
  48         };
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         flash@0 {
  55                 compatible = "jedec,spi-nor";
  56                 reg = <0>;
  57                 spi-max-frequency = <50000000>;
  58
  59                 partitions {
  60                         compatible = "fixed-partitions";
  61                         #address-cells = <1>;
  62                         #size-cells = <1>;
  63
  64                         partition@0 {
  65                                 label = "u-boot";
  66                                 reg = <0x0 0x30000>;
  67                                 read-only;
  68                         };
  69
  70                         partition@30000 {
  71                                 label = "config";
  72                                 reg = <0x30000 0x10000>;
  73                                 read-only;
  74                         };
  75
  76                         factory: partition@40000 {
  77                                 compatible = "nvmem-cells";
  78                                 label = "factory";
  79                                 reg = <0x40000 0x10000>;
  80                                 #address-cells = <1>;
  81                                 #size-cells = <1>;
  82                                 read-only;
  83
  84                                 eeprom_factory_0: eeprom@0 {
  85                                         reg = <0x0 0x200>;
  86                                 };
  87
  88                                 macaddr_factory_4: macaddr@4 {
  89                                         reg = <0x4 0x6>;
  90                                 };
  91                         };
  92
  93                         partition@50000 {
  94                                 compatible = "denx,uimage";
  95                                 label = "firmware";
  96                                 reg = <0x50000 0xfb0000>;
  97                         };
  98                 };
  99         };
 100 };
 101
 102 &state_default {
 103         gpio {
 104                 groups = "i2c", "uartf";
 105                 function = "gpio";
 106         };
 107 };
 108
 109 &ethernet {
 110         pinctrl-names = "default";
 111         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 112
 113         nvmem-cells = <&macaddr_factory_4>;
 114         nvmem-cell-names = "mac-address";
 115
 116         port@5 {
 117                 status = "okay";
 118                 mediatek,fixed-link = <1000 1 1 1>;
 119                 phy-mode = "rgmii";
 120         };
 121
 122         mdio-bus {
 123                 status = "okay";
 124
 125                 ethernet-phy@0 {
 126                         reg = <0>;
 127                         phy-mode = "rgmii";
 128                 };
 129
 130                 ethernet-phy@1 {
 131                         reg = <1>;
 132                         phy-mode = "rgmii";
 133                 };
 134
 135                 ethernet-phy@2 {
 136                         reg = <2>;
 137                         phy-mode = "rgmii";
 138                 };
 139
 140                 ethernet-phy@3 {
 141                         reg = <3>;
 142                         phy-mode = "rgmii";
 143                 };
 144
 145                 ethernet-phy@4 {
 146                         reg = <4>;
 147                         phy-mode = "rgmii";
 148                 };
 149
 150                 ethernet-phy@1f {
 151                         reg = <0x1f>;
 152                         phy-mode = "rgmii";
 153                 };
 154         };
 155 };
 156
 157 &gsw {
 158         mediatek,ephy-base = /bits/ 8 <12>;
 159 };
 160
 161 &pcie {
 162         status = "okay";
 163 };
 164
 165 &pcie0 {
 166         wifi@0,0 {
 167                 compatible = "mediatek,mt76";
 168                 reg = <0x0000 0 0 0 0>;
 169                 mediatek,mtd-eeprom = <&factory 0x8000>;
 170                 ieee80211-freq-limit = <5000000 6000000>;
 171         };
 172 };
 173
 174 &wmac {
 175         nvmem-cells = <&eeprom_factory_0>;
 176         nvmem-cell-names = "eeprom";
 177 };