target/linux/ramips/dts/mt7620n_comfast_cf-wr800n.dts

   1 #include "mt7620n.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "comfast,cf-wr800n", "ralink,mt7620n-soc";
   8         model = "Comfast CF-WR800N";
   9
  10         aliases {
  11                 led-boot = &led_wps;
  12                 led-failsafe = &led_wps;
  13                 led-running = &led_wps;
  14                 led-upgrade = &led_wps;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 ethernet {
  25                         label = "white:ethernet";
  26                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 wifi {
  30                         label = "white:wifi";
  31                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 led_wps: wps {
  35                         label = "white:wps";
  36                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         keys {
  41                 compatible = "gpio-keys";
  42
  43                 reset {
  44                         label = "reset";
  45                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_RESTART>;
  47                 };
  48         };
  49 };
  50
  51 &gpio0 {
  52         status = "okay";
  53 };
  54
  55 &gpio1 {
  56         status = "okay";
  57 };
  58
  59 &gpio2 {
  60         status = "okay";
  61 };
  62
  63 &gpio3 {
  64         status = "okay";
  65 };
  66
  67 &spi0 {
  68         status = "okay";
  69
  70         flash@0 {
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 spi-max-frequency = <10000000>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 label = "u-boot";
  82                                 reg = <0x0 0x30000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@30000 {
  87                                 label = "u-boot-env";
  88                                 reg = <0x30000 0x10000>;
  89                                 read-only;
  90                         };
  91
  92                         factory: partition@40000 {
  93                                 label = "factory";
  94                                 reg = <0x40000 0x10000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@50000 {
  99                                 compatible = "denx,uimage";
 100                                 label = "firmware";
 101                                 reg = <0x50000 0x7b0000>;
 102                         };
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         mtd-mac-address = <&factory 0x4>;
 109 };
 110
 111 &wmac {
 112         ralink,mtd-eeprom = <&factory 0x0>;
 113 };
 114
 115 &state_default {
 116         default {
 117                 groups = "ephy", "wled", "spi refclk", "i2c";
 118                 function = "gpio";
 119         };
 120 };