target/linux/ramips/dts/mt7621_linksys_re6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "linksys,re6500", "mediatek,mt7621-soc";
  10         model = "Linksys RE6500";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 wifi {
  27                         label = "re6500:orange:wifi";
  28                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 led_power: power {
  32                         label = "re6500:white:power";
  33                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  34                 };
  35         };
  36
  37         keys {
  38                 compatible = "gpio-keys";
  39
  40                 wps {
  41                         label = "wps";
  42                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                 };
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &spi0 {
  55         status = "okay";
  56
  57         m25p80@0 {
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <10000000>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x0 0x30000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@30000 {
  74                                 label = "u-boot-env";
  75                                 reg = <0x30000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         factory: partition@40000 {
  80                                 label = "factory";
  81                                 reg = <0x40000 0x10000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@50000 {
  86                                 compatible = "denx,uimage";
  87                                 label = "firmware";
  88                                 reg = <0x50000 0x7b0000>;
  89                         };
  90                 };
  91         };
  92 };
  93
  94 &pinctrl {
  95         state_default: pinctrl0 {
  96                 gpio {
  97                         ralink,group = "i2c", "uart2", "uart3", "rgmii2";
  98                         ralink,function = "gpio";
  99                 };
 100         };
 101 };
 102
 103 &pcie {
 104         status = "okay";
 105 };
 106
 107 &pcie0 {
 108         mt76@0,0 {
 109                 reg = <0x0000 0 0 0 0>;
 110                 mediatek,mtd-eeprom = <&factory 0x0000>;
 111                 ieee80211-freq-limit = <5000000 6000000>;
 112         };
 113 };
 114
 115 &pcie1 {
 116         mt76@0,0 {
 117                 reg = <0x0000 0 0 0 0>;
 118                 mediatek,mtd-eeprom = <&factory 0x8000>;
 119                 ieee80211-freq-limit = <2400000 2500000>;
 120         };
 121 };
 122
 123 &ethernet {
 124         mtd-mac-address = <&factory 0x2e>;
 125 };
 126
 127 &xhci {
 128         status = "disabled";
 129 };