target/linux/ramips/dts/mt7621_netgear_r6260_r6350_r6850.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "mediatek,mt7621-soc";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 led_usb: usb {
  31                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  32                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  33                         linux,default-trigger = "usbport";
  34                 };
  35
  36                 led_internet: internet {
  37                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_wifi: wifi {
  41                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44         };
  45
  46         keys {
  47                 compatible = "gpio-keys";
  48
  49                 wps {
  50                         label = "wps";
  51                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_WPS_BUTTON>;
  53                 };
  54
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60         };
  61
  62         reg_usb_vbus: regulator {
  63                 compatible = "regulator-fixed";
  64                 regulator-name = "usb_vbus";
  65                 regulator-min-microvolt = <5000000>;
  66                 regulator-max-microvolt = <5000000>;
  67                 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
  68                 enable-active-high;
  69         };
  70 };
  71
  72 &nand {
  73         status = "okay";
  74
  75         partitions {
  76                 compatible = "fixed-partitions";
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79
  80                 partition@0 {
  81                         label = "u-boot";
  82                         reg = <0x0 0x100000>;
  83                         read-only;
  84                 };
  85
  86                 partition@100000 {
  87                         label = "SC PART_MAP";
  88                         reg = <0x100000 0x100000>;
  89                         read-only;
  90                 };
  91
  92                 partition@200000 {
  93                         label = "kernel";
  94                         reg = <0x200000 0x400000>;
  95                 };
  96
  97                 partition@600000 {
  98                         label = "ubi";
  99                         reg = <0x600000 0x2800000>;
 100                 };
 101
 102                 partition@2e00000 {
 103                         label = "reserved0";
 104                         reg = <0x2e00000 0x1800000>;
 105                         read-only;
 106                 };
 107
 108                 factory: partition@4600000 {
 109                         label = "factory";
 110                         reg = <0x4600000 0x200000>;
 111                         read-only;
 112                 };
 113
 114                 partition@4800000 {
 115                         label = "reserved1";
 116                         reg = <0x4800000 0x3800000>;
 117                         read-only;
 118                 };
 119         };
 120 };
 121
 122 &xhci {
 123         vbus-supply = <&reg_usb_vbus>;
 124 };
 125
 126 &pcie {
 127         status = "okay";
 128 };
 129
 130 &pcie0 {
 131         wifi@0,0 {
 132                 compatible = "mediatek,mt76";
 133                 reg = <0x0 0 0 0 0>;
 134                 mediatek,mtd-eeprom = <&factory 0x8000>;
 135                 ieee80211-freq-limit = <5000000 6000000>;
 136         };
 137 };
 138
 139 &pcie1 {
 140         wifi@0,0 {
 141                 compatible = "mediatek,mt76";
 142                 reg = <0x0 0 0 0 0>;
 143                 mediatek,mtd-eeprom = <&factory 0x0>;
 144                 ieee80211-freq-limit = <2400000 2500000>;
 145         };
 146 };
 147
 148 &ethernet {
 149         mtd-mac-address = <&factory 0x4>;
 150 };
 151
 152 &pinctrl {
 153         state_default: pinctrl0 {
 154                 gpio {
 155                         ralink,group = "uart3", "uart2", "jtag", "wdt";
 156                         ralink,function = "gpio";
 157                 };
 158         };
 159 };