ramips: mt7621: convert to nvmem-layout
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7621_renkforce_ws-wn530hp3-a.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "renkforce,ws-wn530hp3-a", "mediatek,mt7621-soc";
10 model = "Renkforce WS-WN530HP3-A";
11
12 aliases {
13 label-mac-device = &gmac0;
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 };
19
20 keys {
21 compatible = "gpio-keys";
22
23 reset {
24 label = "reset";
25 gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
26 linux,code = <KEY_RESTART>;
27 };
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 led_power: led_1 {
34 label = "red:led1";
35 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
36 };
37
38 led_2 {
39 label = "blue:led2";
40 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
41 };
42 };
43 };
44
45 &spi0 {
46 status = "okay";
47
48 flash@0 {
49 compatible = "jedec,spi-nor";
50 reg = <0>;
51 spi-max-frequency = <40000000>;
52
53 partitions {
54 compatible = "fixed-partitions";
55 #address-cells = <1>;
56 #size-cells = <1>;
57
58 partition@0 {
59 label = "u-boot";
60 reg = <0x0 0x30000>;
61 read-only;
62 };
63
64 partition@30000 {
65 label = "u-boot-env";
66 reg = <0x30000 0x10000>;
67 read-only;
68 };
69
70 factory: partition@40000 {
71 label = "factory";
72 reg = <0x40000 0x10000>;
73 read-only;
74
75 nvmem-layout {
76 compatible = "fixed-layout";
77 #address-cells = <1>;
78 #size-cells = <1>;
79
80 eeprom_factory_0: eeprom@0 {
81 reg = <0x0 0x400>;
82 };
83
84 eeprom_factory_8000: eeprom@8000 {
85 reg = <0x8000 0x4da8>;
86 };
87
88 macaddr_factory_4: macaddr@4 {
89 reg = <0x4 0x6>;
90 };
91 };
92 };
93
94 partition@50000 {
95 compatible = "denx,uimage";
96 label = "firmware";
97 reg = <0x50000 0xf30000>;
98 };
99 };
100 };
101 };
102
103 &pcie {
104 status = "okay";
105 };
106
107 &pcie0 {
108 wifi0: wifi@0,0 {
109 compatible = "mediatek,mt76";
110 reg = <0x0000 0 0 0 0>;
111 nvmem-cells = <&eeprom_factory_0>;
112 nvmem-cell-names = "eeprom";
113 ieee80211-freq-limit = <2400000 2500000>;
114 };
115 };
116
117 &pcie1 {
118 wifi1: wifi@0,0 {
119 compatible = "mediatek,mt76";
120 reg = <0x0000 0 0 0 0>;
121 ieee80211-freq-limit = <5000000 6000000>;
122 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_4>;
123 nvmem-cell-names = "eeprom", "mac-address";
124 mac-address-increment = <1>;
125 };
126 };
127
128 &gmac0 {
129 nvmem-cells = <&macaddr_factory_4>;
130 nvmem-cell-names = "mac-address";
131 mac-address-increment = <(-2)>;
132 };
133
134 &gmac1 {
135 status = "okay";
136 label = "wan";
137 phy-handle = <&ethphy4>;
138
139 nvmem-cells = <&macaddr_factory_4>;
140 nvmem-cell-names = "mac-address";
141 mac-address-increment = <(-1)>;
142 };
143
144 &mdio {
145 ethphy4: ethernet-phy@4 {
146 reg = <4>;
147 };
148 };
149
150 &switch0 {
151 ports {
152 port@0 {
153 status = "okay";
154 label = "lan2";
155 };
156
157 port@1 {
158 status = "okay";
159 label = "lan1";
160 };
161 };
162 };
163
164 &state_default {
165 gpio {
166 groups = "uart2", "jtag", "wdt";
167 function = "gpio";
168 };
169 };
170
171 &xhci {
172 status = "disabled";
173 };