ramips: add support for TP-Link RE650 v1
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_tplink_re650-v1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7621.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "tplink,re650-v1", "mediatek,mt7621-soc";
11 model = "TP-Link RE650 v1";
12
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 };
19
20 chosen {
21 bootargs = "console=ttyS0,57600";
22 };
23
24 leds {
25 compatible = "gpio-leds";
26
27 led_power: power {
28 label = "re650-v1:blue:power";
29 gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
30 };
31
32 wifi2g {
33 label = "re650-v1:blue:wifi2G";
34 gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
35 };
36
37 wifi5g {
38 label = "re650-v1:blue:wifi5G";
39 gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
40 };
41
42 wps_red {
43 label = "re650-v1:red:wps";
44 gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
45 };
46
47 wps_blue {
48 label = "re650-v1:blue:wps";
49 gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
50 };
51
52 eth_act {
53 label = "re650-v1:green:eth_act";
54 gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
55 };
56
57 eth_link {
58 label = "re650-v1:green:eth_link";
59 gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
60 };
61 };
62
63 keys {
64 compatible = "gpio-keys";
65
66 wps {
67 label = "wps";
68 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
69 debounce-interval = <60>;
70 linux,code = <KEY_WPS_BUTTON>;
71 };
72
73 power {
74 label = "power";
75 gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
76 debounce-interval = <60>;
77 linux,code = <KEY_POWER>;
78 };
79
80 led {
81 label = "led";
82 gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
83 debounce-interval = <60>;
84 linux,code = <KEY_LIGHTS_TOGGLE>;
85 };
86
87 reset {
88 label = "reset";
89 gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
90 debounce-interval = <60>;
91 linux,code = <KEY_RESTART>;
92 };
93 };
94 };
95
96 &spi0 {
97 status = "okay";
98
99 w25q64@0 {
100 compatible = "jedec,spi-nor";
101 reg = <0>;
102 spi-max-frequency = <40000000>;
103
104 partitions {
105 compatible = "fixed-partitions";
106 #address-cells = <1>;
107 #size-cells = <1>;
108
109 partition@0 {
110 label = "u-boot";
111 reg = <0x0 0x20000>;
112 read-only;
113 };
114
115 partition@20000 {
116 compatible = "tplink,firmware";
117 label = "firmware";
118 reg = <0x20000 0xde0000>;
119 };
120
121 config: partition@e00000 {
122 label = "config";
123 reg = <0xe00000 0x50000>;
124 read-only;
125 };
126
127 /* range 0xe50000 to 0xff0000 is empty in vendor
128 * firmware, so we do not use it either
129 */
130
131 radio: partition@ff0000 {
132 label = "radio";
133 reg = <0xff0000 0x10000>;
134 read-only;
135 };
136 };
137 };
138 };
139
140 &pcie {
141 status = "okay";
142 };
143
144 &pcie0 {
145 wifi@0,0 {
146 compatible = "mediatek,mt76";
147 reg = <0x0000 0 0 0 0>;
148 mediatek,mtd-eeprom = <&radio 0>;
149 mtd-mac-address = <&config 0x10008>;
150 mtd-mac-address-increment = <1>;
151 ieee80211-freq-limit = <2400000 2500000>;
152 };
153 };
154
155 &pcie1 {
156 wifi@0,0 {
157 compatible = "mediatek,mt76";
158 reg = <0x0000 0 0 0 0>;
159 mediatek,mtd-eeprom = <&radio 0x8000>;
160 mtd-mac-address = <&config 0x10008>;
161 mtd-mac-address-increment = <2>;
162 ieee80211-freq-limit = <5000000 6000000>;
163 };
164 };
165
166 &ethernet {
167 mtd-mac-address = <&config 0x10008>;
168 };
169
170 &pinctrl {
171 state_default: pinctrl0 {
172 gpio {
173 ralink,group = "rgmii2", "wdt";
174 ralink,function = "gpio";
175 };
176 };
177 };