target/linux/ramips/dts/mt7628an_mercury_mac1200r-v2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "mercury,mac1200r-v2", "mediatek,mt7628an-soc";
  10         model = "Mercury MAC1200R v2";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25                 led_status: status {
  26                         label = "mac1200rv2:green:status";
  27                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30 };
  31
  32 &spi0 {
  33         status = "okay";
  34
  35         m25p80@0 {
  36                 compatible = "jedec,spi-nor";
  37                 reg = <0 0>;
  38                 spi-max-frequency = <10000000>;
  39
  40                 partitions {
  41                         compatible = "fixed-partitions";
  42                         #address-cells = <1>;
  43                         #size-cells = <1>;
  44
  45                         partition@0 {
  46                                 label = "u-boot";
  47                                 reg = <0x0 0x1d800>;
  48                         };
  49
  50                         factory: partition@1d800 {
  51                                 label = "factory_info";
  52                                 reg = <0x1d800 0x800>;
  53                                 read-only;
  54                         };
  55
  56                         art: partition@1e000 {
  57                                 label = "art";
  58                                 reg = <0x1e000 0x2000>;
  59                                 read-only;
  60                         };
  61
  62                         partition@20000 {
  63                                 label = "config";
  64                                 reg = <0x20000 0x10000>;
  65                         };
  66
  67                         partition@30000 {
  68                                 label = "u-boot2";
  69                                 reg = <0x30000 0x10000>;
  70                         };
  71
  72                         partition@40000 {
  73                                 compatible = "denx,uimage";
  74                                 label = "firmware";
  75                                 reg = <0x40000 0x7c0000>;
  76                         };
  77                 };
  78         };
  79 };
  80
  81 &ethernet {
  82         pinctrl-names = "default";
  83         mtd-mac-address = <&factory 0xd>;
  84         mediatek,portmap = "llllw";
  85 };
  86
  87 &wmac {
  88         status = "okay";
  89         ralink,mtd-eeprom = <&art 0x0>;
  90 };
  91
  92 &pcie {
  93         status = "okay";
  94 };
  95
  96 &pcie0 {
  97         mt76@0,0 {
  98                 reg = <0x0000 0 0 0 0>;
  99                 mediatek,mtd-eeprom = <&art 0x1000>;
 100                 ieee80211-freq-limit = <5000000 6000000>;
 101         };
 102 };