target/linux/ramips/dts/mt7628an_tplink_tl-mr6400-v4.dts

   1 #include "mt7628an_tplink_8m.dtsi"
   2
   3 / {
   4         compatible = "tplink,tl-mr6400-v4", "mediatek,mt7628an-soc";
   5         model = "TP-Link TL-MR6400 v4";
   6
   7         aliases {
   8                 led-boot = &led_power;
   9                 led-failsafe = &led_power;
  10                 led-running = &led_power;
  11                 led-upgrade = &led_power;
  12         };
  13
  14         keys {
  15                 compatible = "gpio-keys";
  16
  17                 reset {
  18                         label = "reset";
  19                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  20                         linux,code = <KEY_RESTART>;
  21                 };
  22
  23                 rfkill {
  24                         label = "rfkill";
  25                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RFKILL>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power: power {
  34                         label = "white:power";
  35                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wan {
  39                         label = "white:wan";
  40                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan {
  44                         label = "white:wlan";
  45                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48
  49                 lan {
  50                         label = "white:lan";
  51                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 signal1 {
  55                         label = "white:signal1";
  56                         gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 signal2 {
  60                         label = "white:signal2";
  61                         gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 signal3 {
  65                         label = "white:signal3";
  66                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  67                 };
  68         };
  69 };
  70
  71 &ehci {
  72         status = "okay";
  73 };
  74
  75 &ohci {
  76         status = "okay";
  77 };
  78
  79 &state_default {
  80         gpio {
  81                 groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "refclk", "uart1", "wdt", "wled_an";
  82                 function = "gpio";
  83         };
  84 };
  85
  86 &esw {
  87         mediatek,portmap = <0x2f>;
  88         mediatek,portdisable = <0x21>;
  89 };
  90
  91 &wmac {
  92         mtd-mac-address = <&factory 0x1f100>;
  93 };
  94
  95 &ethernet {
  96         mtd-mac-address = <&factory 0x1f100>;
  97 };