target/linux/ramips/dts/rt3050_edimax_3g-6200nl.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/mtd/partitions/uimage.h>
   6
   7 / {
   8         compatible = "edimax,3g-6200nl", "ralink,rt3050-soc";
   9         model = "Edimax 3g-6200nl";
  10
  11         aliases {
  12                 led-boot = &led_internet;
  13                 led-failsafe = &led_internet;
  14                 led-running = &led_internet;
  15                 led-upgrade = &led_internet;
  16         };
  17
  18         flash@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 label = "u-boot";
  31                                 reg = <0x0 0x30000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x30000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 compatible = "nvmem-cells";
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 #address-cells = <1>;
  46                                 #size-cells = <1>;
  47                                 read-only;
  48
  49                                 eeprom_factory_0: eeprom@0 {
  50                                         reg = <0x0 0x200>;
  51                                 };
  52
  53                                 macaddr_factory_4: macaddr@4 {
  54                                         reg = <0x4 0x6>;
  55                                 };
  56                         };
  57
  58                         partition@3e0000 {
  59                                 label = "cimage";
  60                                 reg = <0x3e0000 0x20000>;
  61                                 read-only;
  62                         };
  63
  64                         partition@50000 {
  65                                 compatible = "openwrt,uimage", "denx,uimage";
  66                                 openwrt,offset = <FW_EDIMAX_OFFSET>;
  67                                 openwrt,partition-magic = <FW_MAGIC_EDIMAX>;
  68                                 label = "firmware";
  69                                 reg = <0x50000 0x390000>;
  70                         };
  71                 };
  72         };
  73
  74         leds {
  75                 compatible = "gpio-leds";
  76
  77                 led_internet: internet {
  78                         label = "green:internet";
  79                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  80                 };
  81
  82                 wlan {
  83                         label = "green:wlan";
  84                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  85                 };
  86         };
  87
  88         keys {
  89                 compatible = "gpio-keys-polled";
  90                 poll-interval = <20>;
  91
  92                 reset {
  93                         label = "reset";
  94                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  95                         linux,code = <KEY_RESTART>;
  96                 };
  97         };
  98 };
  99
 100 &state_default {
 101         gpio {
 102                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 103                 function = "gpio";
 104         };
 105 };
 106
 107 &ethernet {
 108         nvmem-cells = <&macaddr_factory_4>;
 109         nvmem-cell-names = "mac-address";
 110 };
 111
 112 &esw {
 113         mediatek,portdisable = <0x37>;
 114 };
 115
 116 &wmac {
 117         nvmem-cells = <&eeprom_factory_0>;
 118         nvmem-cell-names = "eeprom";
 119 };
 120
 121 &otg {
 122         status = "okay";
 123 };