target/linux/ramips/dts/rt3050_netcore_nw718.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "netcore,nw718", "ralink,rt3050-soc";
   8         model = "Netcore NW718";
   9
  10         aliases {
  11                 led-boot = &led_cpu;
  12                 led-failsafe = &led_cpu;
  13                 led-running = &led_cpu;
  14                 led-upgrade = &led_cpu;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_cpu: cpu {
  21                         label = "amber:cpu";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 usb {
  26                         label = "amber:usb";
  27                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  28                         trigger-sources = <&otg_port1>;
  29                         linux,default-trigger = "usbport";
  30                 };
  31
  32                 wps {
  33                         label = "amber:wps";
  34                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  35                 };
  36         };
  37
  38         keys {
  39                 compatible = "gpio-keys-polled";
  40                 poll-interval = <20>;
  41
  42                 reset {
  43                         label = "reset";
  44                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RESTART>;
  46                 };
  47
  48                 wps {
  49                         label = "wps";
  50                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_WPS_BUTTON>;
  52                 };
  53         };
  54 };
  55
  56 &spi0 {
  57         status = "okay";
  58
  59         flash@0 {
  60                 compatible = "jedec,spi-nor";
  61                 reg = <0>;
  62                 spi-max-frequency = <25000000>;
  63
  64                 partitions {
  65                         compatible = "fixed-partitions";
  66                         #address-cells = <1>;
  67                         #size-cells = <1>;
  68
  69                         partition@0 {
  70                                 label = "u-boot";
  71                                 reg = <0x0 0x30000>;
  72                                 read-only;
  73                         };
  74
  75                         partition@30000 {
  76                                 label = "config";
  77                                 reg = <0x30000 0x20000>;
  78                                 read-only;
  79                         };
  80
  81                         factory: partition@50000 {
  82                                 label = "factory";
  83                                 reg = <0x50000 0x10000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@60000 {
  88                                 compatible = "denx,uimage";
  89                                 label = "firmware";
  90                                 reg = <0x60000 0x3a0000>;
  91                         };
  92                 };
  93         };
  94 };
  95
  96 &state_default {
  97         gpio {
  98                 groups = "i2c", "jtag", "rgmii", "mdio", "uartf";
  99                 function = "gpio";
 100         };
 101 };
 102
 103 &ethernet {
 104         mtd-mac-address = <&factory 0x4>;
 105 };
 106
 107 &esw {
 108         mediatek,portmap = <0x2f>;
 109 };
 110
 111 &wmac {
 112         ralink,mtd-eeprom = <&factory 0x0>;
 113 };
 114
 115 &otg {
 116         status = "okay";
 117 };