ramips: use gpio-keys-polled instead of gpio-buttons
[openwrt/svn-archive/archive.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-hw550-3g.c
1 /*
2 * Aztech HW550-3G board support
3 *
4 * Copyright (C) 2011 Layne Edwards <ledwards76@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16
17 #include <asm/mach-ralink/machine.h>
18 #include <asm/mach-ralink/dev-gpio-buttons.h>
19 #include <asm/mach-ralink/dev-gpio-leds.h>
20 #include <asm/mach-ralink/rt305x.h>
21 #include <asm/mach-ralink/rt305x_regs.h>
22
23 #include "devices.h"
24
25 #define HW550_3G_GPIO_LED_USB 8
26 #define HW550_3G_GPIO_LED_3G 11
27 #define HW550_3G_GPIO_LED_STATUS 12
28 #define HW550_3G_GPIO_LED_WPS 14
29
30 #define HW550_3G_GPIO_BUTTON_RESET 10
31 #define HW550_3G_GPIO_BUTTON_CONNECT 7
32 #define HW550_3G_GPIO_BUTTON_WPS 0
33
34 #define HW550_3G_KEYS_POLL_INTERVAL 20
35 #define HW550_3G_KEYS_DEBOUNCE_INTERVAL (3 * HW550_3G_KEYS_POLL_INTERVAL)
36
37 static struct mtd_partition hw550_3g_partitions[] = {
38 {
39 .name = "u-boot",
40 .offset = 0,
41 .size = 0x030000,
42 .mask_flags = MTD_WRITEABLE,
43 }, {
44 .name = "config",
45 .offset = 0x030000,
46 .size = 0x010000,
47 .mask_flags = MTD_WRITEABLE,
48 }, {
49 .name = "factory",
50 .offset = 0x040000,
51 .size = 0x010000,
52 .mask_flags = MTD_WRITEABLE,
53 }, {
54 .name = "kernel",
55 .offset = 0x050000,
56 .size = 0x0d0000,
57 }, {
58 .name = "rootfs",
59 .offset = 0x120000,
60 .size = 0x6e0000,
61 }, {
62 .name = "firmware",
63 .offset = 0x050000,
64 .size = 0x7b0000,
65 }
66 };
67
68 static struct physmap_flash_data hw550_3g_flash_data = {
69 .nr_parts = ARRAY_SIZE(hw550_3g_partitions),
70 .parts = hw550_3g_partitions,
71 };
72
73 static struct gpio_led hw550_3g_leds_gpio[] __initdata = {
74 {
75 .name = "hw550-3g:green:usb",
76 .gpio = HW550_3G_GPIO_LED_USB,
77 .active_low = 1,
78 }, {
79 .name = "hw550-3g:green:3g",
80 .gpio = HW550_3G_GPIO_LED_3G,
81 .active_low = 1,
82 }, {
83 .name = "hw550-3g:green:status",
84 .gpio = HW550_3G_GPIO_LED_STATUS,
85 .active_low = 1,
86 }, {
87 .name = "hw550-3g:green:wps",
88 .gpio = HW550_3G_GPIO_LED_WPS,
89 .active_low = 1,
90 }
91 };
92
93 static struct gpio_keys_button hw550_3g_gpio_buttons[] __initdata = {
94 {
95 .desc = "reset",
96 .type = EV_KEY,
97 .code = KEY_RESTART,
98 .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
99 .gpio = HW550_3G_GPIO_BUTTON_RESET,
100 .active_low = 1,
101 }, {
102 .desc = "connect",
103 .type = EV_KEY,
104 .code = KEY_CONNECT,
105 .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
106 .gpio = HW550_3G_GPIO_BUTTON_CONNECT,
107 .active_low = 1,
108 }, {
109 .desc = "wps",
110 .type = EV_KEY,
111 .code = KEY_WPS_BUTTON,
112 .debounce_interval = HW550_3G_KEYS_DEBOUNCE_INTERVAL,
113 .gpio = HW550_3G_GPIO_BUTTON_WPS,
114 .active_low = 1,
115 }
116 };
117
118 #define HW550_3G_GPIO_MODE \
119 ((RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT) | \
120 RT305X_GPIO_MODE_MDIO)
121
122 static void __init hw550_3g_init(void)
123 {
124 rt305x_gpio_init(HW550_3G_GPIO_MODE);
125
126 rt305x_register_flash(0, &hw550_3g_flash_data);
127 rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
128 rt305x_register_ethernet();
129 ramips_register_gpio_leds(-1, ARRAY_SIZE(hw550_3g_leds_gpio),
130 hw550_3g_leds_gpio);
131 ramips_register_gpio_buttons(-1, HW550_3G_KEYS_POLL_INTERVAL,
132 ARRAY_SIZE(hw550_3g_gpio_buttons),
133 hw550_3g_gpio_buttons);
134 rt305x_register_wifi();
135 rt305x_register_wdt();
136 rt305x_register_usb();
137 }
138
139 MIPS_MACHINE(RAMIPS_MACH_HW550_3G, "HW550-3G", "Aztech HW550-3G",
140 hw550_3g_init);