ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
[openwrt/openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt305x / mach-omni-emb.c
1 /*
2 * Omnima MiniEMBWiFi board support
3 *
4 * Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
9 */
10
11 #include <linux/init.h>
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/gpio.h>
17
18 #include <asm/mach-ralink/machine.h>
19 #include <asm/mach-ralink/dev-gpio-buttons.h>
20 #include <asm/mach-ralink/dev-gpio-leds.h>
21 #include <asm/mach-ralink/rt305x.h>
22 #include <asm/mach-ralink/rt305x_regs.h>
23
24 #include "devices.h"
25
26 #define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */
27
28 #define OMNI_EMB_BUTTONS_POLL_INTERVAL 20
29
30 #define OMNI_EMB_GPIO_LED_STATUS 9
31 #define OMNI_EMB_GPIO_LED_WLAN 14
32
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition emb_partitions[] = {
35 {
36 .name = "uboot",
37 .offset = 0,
38 .size = 0x030000,
39 }, {
40 .name = "uboot-config",
41 .offset = 0x030000,
42 .size = 0x040000,
43 .mask_flags = MTD_WRITEABLE,
44 }, {
45 .name = "factory",
46 .offset = 0x040000,
47 .size = 0x050000,
48 .mask_flags = MTD_WRITEABLE,
49 }, {
50 .name = "linux",
51 .offset = 0x050000,
52 .size = 0x100000,
53 }, {
54 .name = "rootfs",
55 .offset = 0x150000,
56 .size = 0x6B0000,
57 }, {
58 .name = "firmware",
59 .offset = 0x050000,
60 .size = 0x7B0000,
61 }
62 };
63 #endif /* CONFIG_MTD_PARTITIONS */
64
65 static struct physmap_flash_data omni_emb_flash_data = {
66 #ifdef CONFIG_MTD_PARTITIONS
67 .nr_parts = ARRAY_SIZE(emb_partitions),
68 .parts = emb_partitions,
69 #endif
70 };
71
72 static struct gpio_led omni_emb_leds_gpio[] __initdata = {
73 {
74 .name = "emb:green:status",
75 .gpio = OMNI_EMB_GPIO_LED_STATUS,
76 .active_low = 1,
77 }, {
78 .name = "emb:green:wlan",
79 .gpio = OMNI_EMB_GPIO_LED_WLAN,
80 .active_low = 1,
81 }
82 };
83
84 static struct gpio_button omni_emb_gpio_buttons[] __initdata = {
85 {
86 .desc = "reset",
87 .type = EV_KEY,
88 .code = KEY_RESTART,
89 .threshold = 3,
90 .gpio = OMNI_EMB_GPIO_BUTTON_RESET,
91 .active_low = 1,
92 }
93 };
94
95 static void __init omni_emb_init(void)
96 {
97 rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
98
99 rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
100
101 ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio),
102 omni_emb_leds_gpio);
103 ramips_register_gpio_buttons(-1, OMNI_EMB_BUTTONS_POLL_INTERVAL,
104 ARRAY_SIZE(omni_emb_gpio_buttons),
105 omni_emb_gpio_buttons);
106
107 rt305x_register_flash(0, &omni_emb_flash_data);
108 rt305x_register_ethernet();
109 rt305x_register_wifi();
110 rt305x_register_wdt();
111 rt305x_register_usb();
112 }
113
114 MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi",
115 omni_emb_init);