include ./common-buffalo.mk include ./common-netgear.mk include ./common-tp-link.mk include ./common-yuncore.mk DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK DEVICE_VARS += KERNEL_INITRAMFS_PREFIX define Build/add-elecom-factory-initramfs $(eval edimax_model=$(word 1,$(1))) $(eval product=$(word 2,$(1))) $(STAGING_DIR_HOST)/bin/mkedimaximg \ -b -s CSYS -m $(edimax_model) \ -f 0x70000 -S 0x01100000 \ -i $@ -o $@.factory ( \ echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \ echo -n "0.00" | dd bs=16 count=1 conv=sync; \ dd if=$@.factory; \ ) > $@.factory.new if [ "$$(stat -c%s $@.factory.new)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \ mv $@.factory.new $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \ else \ echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \ fi endef define Build/addpattern -$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \ -v v$(ADDPATTERN_VERSION) -i $@ -o $@.new -mv "$@.new" "$@" endef define Build/append-md5sum-bin $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\ xargs echo -ne >> $@ endef define Build/cybertan-trx @echo -n '' > $@-empty.bin -$(STAGING_DIR_HOST)/bin/trx -o $@.new \ -f $(IMAGE_KERNEL) -F $@-empty.bin \ -x 32 -a 0x10000 -x -32 -f $@ -mv "$@.new" "$@" -rm $@-empty.bin endef define Build/nec-enc $(STAGING_DIR_HOST)/bin/nec-enc \ -i $@ -o $@.new -k $(1) mv $@.new $@ endef define Build/nec-fw ( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@ ( \ echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \ echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \ dd if=$@; \ ) > $@.new mv $@.new $@ endef define Build/pisen_wmb001n-factory -[ -f "$@" ] && \ mkdir -p "$@.tmp" && \ cp "$(KDIR)/loader-$(word 1,$(1)).uImage" "$@.tmp/uImage" && \ mv "$@" "$@.tmp/rootfs" && \ cp "bin/pisen_wmb001n_factory-header.bin" "$@" && \ $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s --sort=name \ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \ -C "$@.tmp" . | gzip -9n >> "$@" && \ rm -rf "$@.tmp" endef define Build/teltonika-fw-fake-checksum # Teltonika U-Boot web based firmware upgrade/recovery routine compares # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes # from begin of the firmware file) with 16 bytes stored just before # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified. let \ offs="$$(stat -c%s $@) - 20"; \ dd if=$@ bs=1 count=16 skip=76 |\ dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc endef define Device/seama KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma KERNEL_INITRAMFS := $$(KERNEL) | seama IMAGES += factory.bin SEAMA_MTDBLOCK := 1 # 64 bytes offset: # - 28 bytes seama_header # - 36 bytes of META data (4-bytes aligned) IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \ append-metadata | check-size IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \ seama-seal | check-size SEAMA_SIGNATURE := endef define Device/8dev_carambola2 SOC := ar9331 DEVICE_VENDOR := 8devices DEVICE_MODEL := Carambola2 DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += carambola2 endef TARGET_DEVICES += 8dev_carambola2 define Device/adtran_bsap1880 SOC := ar7161 DEVICE_VENDOR := Adtran/Bluesocket DEVICE_PACKAGES += -swconfig -uboot-envtools fconfig KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb IMAGE_SIZE := 11200k IMAGES += kernel.bin rootfs.bin IMAGE/kernel.bin := append-kernel IMAGE/rootfs.bin := append-rootfs | pad-rootfs IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \ check-size | sysupgrade-tar rootfs=$$$$@ | append-metadata endef define Device/adtran_bsap1800-v2 $(Device/adtran_bsap1880) DEVICE_MODEL := BSAP-1800 DEVICE_VARIANT := v2 endef TARGET_DEVICES += adtran_bsap1800-v2 define Device/adtran_bsap1840 $(Device/adtran_bsap1880) DEVICE_MODEL := BSAP-1840 endef TARGET_DEVICES += adtran_bsap1840 define Device/alfa-network_ap121f SOC := ar9331 DEVICE_VENDOR := ALFA Network DEVICE_MODEL := AP121F DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 kmod-usb-storage -swconfig IMAGE_SIZE := 16064k SUPPORTED_DEVICES += ap121f endef TARGET_DEVICES += alfa-network_ap121f define Device/aruba_ap-105 SOC := ar7161 DEVICE_VENDOR := Aruba DEVICE_MODEL := AP-105 IMAGE_SIZE := 16000k DEVICE_PACKAGES := kmod-i2c-gpio kmod-tpm-i2c-atmel endef TARGET_DEVICES += aruba_ap-105 define Device/avm_fritz300e SOC := ar7242 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!WLAN Repeater 300E KERNEL := kernel-bin | append-dtb | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE_SIZE := 15232k IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \ append-metadata | check-size DEVICE_PACKAGES := fritz-tffs rssileds -swconfig SUPPORTED_DEVICES += fritz300e endef TARGET_DEVICES += avm_fritz300e define Device/avm_fritz4020 SOC := qca9561 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!Box 4020 IMAGE_SIZE := 15232k KERNEL := kernel-bin | append-dtb | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | append-rootfs | pad-rootfs | \ append-metadata | check-size DEVICE_PACKAGES := fritz-tffs SUPPORTED_DEVICES += fritz4020 endef TARGET_DEVICES += avm_fritz4020 define Device/buffalo_bhr-4grv SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := BHR-4GRV DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32256k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs | check-size IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | \ buffalo-tag BHR-4GRV 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g450h endef TARGET_DEVICES += buffalo_bhr-4grv define Device/buffalo_bhr-4grv2 SOC := qca9557 DEVICE_VENDOR := Buffalo DEVICE_MODEL := BHR-4GRV2 IMAGE_SIZE := 16000k endef TARGET_DEVICES += buffalo_bhr-4grv2 define Device/buffalo_wzr-hp-ag300h SOC := ar7161 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-AG300H IMAGE_SIZE := 32320k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs | check-size IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | \ buffalo-tag WZR-HP-AG300H 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += wzr-hp-ag300h endef TARGET_DEVICES += buffalo_wzr-hp-ag300h define Device/buffalo_wzr-hp-g302h-a1a0 SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-G302H DEVICE_VARIANT := A1A0 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32128k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs | check-size IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | \ buffalo-tag WZR-HP-G302H 4 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g300nh2 endef TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0 define Device/buffalo_wzr-hp-g450h SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-G450H/WZR-450HP DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32256k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs | check-size IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | \ buffalo-tag WZR-HP-G450H 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g450h endef TARGET_DEVICES += buffalo_wzr-hp-g450h define Device/comfast_cf-e110n-v2 SOC := qca9533 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E110N DEVICE_VARIANT := v2 DEVICE_PACKAGES := rssileds kmod-leds-gpio -swconfig -uboot-envtools IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-e110n-v2 define Device/comfast_cf-e120a-v3 SOC := ar9344 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E120A DEVICE_VARIANT := v3 DEVICE_PACKAGES := rssileds kmod-leds-gpio -uboot-envtools IMAGE_SIZE := 8000k endef TARGET_DEVICES += comfast_cf-e120a-v3 define Device/comfast_cf-e313ac SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E313AC DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-ath10k-ct-smallbuffers \ ath10k-firmware-qca9888-ct -swconfig -uboot-envtools IMAGE_SIZE := 7936k endef TARGET_DEVICES += comfast_cf-e313ac define Device/comfast_cf-e314n-v2 SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E314N DEVICE_VARIANT := v2 DEVICE_PACKAGES := rssileds IMAGE_SIZE := 7936k endef TARGET_DEVICES += comfast_cf-e314n-v2 define Device/comfast_cf-e5 SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E5/E7 DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-usb2 kmod-usb-net \ kmod-usb-net-qmi-wwan -swconfig -uboot-envtools IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-e5 define Device/comfast_cf-e560ac SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E560AC DEVICE_PACKAGES := kmod-leds-gpio kmod-usb2 kmod-ath10k-ct \ ath10k-firmware-qca9888-ct IMAGE_SIZE := 16128k endef TARGET_DEVICES += comfast_cf-e560ac define Device/comfast_cf-ew72 SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-EW72 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ -uboot-envtools -swconfig IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-ew72 define Device/comfast_cf-wr650ac-v1 SOC := qca9558 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-WR650AC DEVICE_VARIANT := v1 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 16128k endef TARGET_DEVICES += comfast_cf-wr650ac-v1 define Device/comfast_cf-wr650ac-v2 SOC := qca9558 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-WR650AC DEVICE_VARIANT := v2 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += comfast_cf-wr650ac-v2 define Device/comfast_cf-wr752ac-v1 SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-WR752AC DEVICE_VARIANT := v1 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \ -uboot-envtools IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-wr752ac-v1 define Device/devolo_dvl1200e SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1200e DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1200e define Device/devolo_dvl1200i SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1200i DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1200i define Device/devolo_dvl1750c SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750c DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750c define Device/devolo_dvl1750e SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750e DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750e define Device/devolo_dvl1750i SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750i DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750i define Device/devolo_dvl1750x SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750x DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750x define Device/devolo_magic-2-wifi SOC := ar9344 DEVICE_VENDOR := Devolo DEVICE_MODEL := Magic 2 WiFi DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15872k endef TARGET_DEVICES += devolo_magic-2-wifi define Device/dlink_dir-505 SOC := ar9330 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-505 IMAGE_SIZE := 7680k DEVICE_PACKAGES := kmod-usb2 SUPPORTED_DEVICES += dir-505-a1 endef TARGET_DEVICES += dlink_dir-505 define Device/dlink_dir-825-b1 SOC := ar7161 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-825 DEVICE_VARIANT := B1 IMAGE_SIZE := 6208k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += dir-825-b1 endef TARGET_DEVICES += dlink_dir-825-b1 define Device/dlink_dir-825-c1 SOC := ar9344 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-825 DEVICE_VARIANT := C1 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset \ kmod-owl-loader SUPPORTED_DEVICES += dir-825-c1 IMAGE_SIZE := 15936k IMAGES := factory.bin sysupgrade.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \ append-string 00DB120AR9344-RT-101214-00 | check-size IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \ check-size endef TARGET_DEVICES += dlink_dir-825-c1 define Device/dlink_dir-835-a1 SOC := ar9344 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-835 DEVICE_VARIANT := A1 DEVICE_PACKAGES := kmod-usb2 kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += dir-835-a1 IMAGE_SIZE := 15936k IMAGES := factory.bin sysupgrade.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \ append-string 00DB120AR9344-RT-101214-00 | check-size IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \ check-size endef TARGET_DEVICES += dlink_dir-835-a1 define Device/dlink_dir-842-c SOC := qca9563 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-842 KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma KERNEL_INITRAMFS := $$(KERNEL) | seama IMAGES += factory.bin SEAMA_MTDBLOCK := 5 SEAMA_SIGNATURE := wrgac65_dlink.2015_dir842 # 64 bytes offset: # - 28 bytes seama_header # - 36 bytes of META data (4-bytes aligned) IMAGE/default := append-kernel | uImage lzma | \ pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \ append-metadata | check-size IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \ seama-seal | check-size IMAGE_SIZE := 15680k endef define Device/dlink_dir-842-c1 $(Device/dlink_dir-842-c) DEVICE_VARIANT := C1 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += dlink_dir-842-c1 define Device/dlink_dir-842-c2 $(Device/dlink_dir-842-c) DEVICE_VARIANT := C2 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += dlink_dir-842-c2 define Device/dlink_dir-842-c3 $(Device/dlink_dir-842-c) DEVICE_VARIANT := C3 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += dlink_dir-842-c3 define Device/dlink_dir-859-a1 $(Device/seama) SOC := qca9563 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-859 DEVICE_VARIANT := A1 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859 endef TARGET_DEVICES += dlink_dir-859-a1 define Device/elecom_wrc-1750ghbk2-i SOC := qca9563 DEVICE_VENDOR := ELECOM DEVICE_MODEL := WRC-1750GHBK2-I/C IMAGE_SIZE := 15808k KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \ add-elecom-factory-initramfs RN68 WRC-1750GHBK2 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += elecom_wrc-1750ghbk2-i define Device/elecom_wrc-300ghbk2-i SOC := qca9563 DEVICE_VENDOR := ELECOM DEVICE_MODEL := WRC-300GHBK2-I IMAGE_SIZE := 7616k KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \ add-elecom-factory-initramfs RN51 WRC-300GHBK2-I endef TARGET_DEVICES += elecom_wrc-300ghbk2-i define Device/embeddedwireless_dorin SOC := ar9331 DEVICE_VENDOR := Embedded Wireless DEVICE_MODEL := Dorin DEVICE_PACKAGES := kmod-usb-chipidea2 IMAGE_SIZE := 16000k endef TARGET_DEVICES += embeddedwireless_dorin define Device/engenius_ecb1750 SOC := qca9558 DEVICE_VENDOR := EnGenius DEVICE_MODEL := ECB1750 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15680k IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x101 -p 0x6d -t 2 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size endef TARGET_DEVICES += engenius_ecb1750 define Device/engenius_epg5000 SOC := qca9558 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EPG5000 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 IMAGE_SIZE := 14656k IMAGES += factory.dlf IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x101 -p 0x71 -t 2 SUPPORTED_DEVICES += epg5000 endef TARGET_DEVICES += engenius_epg5000 define Device/engenius_ews511ap SOC := qca9531 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EWS511AP DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += engenius_ews511ap define Device/etactica_eg200 SOC := ar9331 DEVICE_VENDOR := eTactica DEVICE_MODEL := EG200 DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \ kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += rme-eg200 endef TARGET_DEVICES += etactica_eg200 define Device/glinet_6408 $(Device/tplink-8mlzma) SOC := ar9331 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := 6408 DEVICE_PACKAGES := kmod-usb2 IMAGE_SIZE := 8000k TPLINK_HWID := 0x08000001 IMAGES := sysupgrade.bin SUPPORTED_DEVICES += gl-inet endef TARGET_DEVICES += glinet_6408 define Device/glinet_6416 $(Device/tplink-16mlzma) SOC := ar9331 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := 6416 DEVICE_PACKAGES := kmod-usb2 IMAGE_SIZE := 16192k TPLINK_HWID := 0x08000001 IMAGES := sysupgrade.bin SUPPORTED_DEVICES += gl-inet endef TARGET_DEVICES += glinet_6416 define Device/glinet_gl-ar150 SOC := ar9330 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR150 DEVICE_PACKAGES := kmod-usb-chipidea2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar150 endef TARGET_DEVICES += glinet_gl-ar150 define Device/glinet_gl-ar300m-common-nor SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_PACKAGES := kmod-usb2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar300m endef define Device/glinet_gl-ar300m-lite $(Device/glinet_gl-ar300m-common-nor) DEVICE_MODEL := GL-AR300M DEVICE_VARIANT := Lite endef TARGET_DEVICES += glinet_gl-ar300m-lite define Device/glinet_gl-ar300m16 $(Device/glinet_gl-ar300m-common-nor) DEVICE_MODEL := GL-AR300M16 endef TARGET_DEVICES += glinet_gl-ar300m16 define Device/glinet_gl-ar750 SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR750 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar750 endef TARGET_DEVICES += glinet_gl-ar750 define Device/glinet_gl-x750 SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-X750 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += glinet_gl-x750 define Device/iodata_etg3-r SOC := ar9342 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := ETG3-R IMAGE_SIZE := 7680k DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic endef TARGET_DEVICES += iodata_etg3-r define Device/iodata_wn-ac1167dgr SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1167DGR IMAGE_SIZE := 14656k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x30a -p 0x61 -t 2 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1167dgr define Device/iodata_wn-ac1600dgr SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1600DGR IMAGE_SIZE := 14656k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x30a -p 0x60 -t 2 -v 200 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1600dgr define Device/iodata_wn-ac1600dgr2 SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1600DGR2/DGR3 IMAGE_SIZE := 14656k IMAGES += dgr2-dgr3-factory.bin IMAGE/dgr2-dgr3-factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x30a -p 0x60 -t 2 -v 200 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1600dgr2 define Device/iodata_wn-ag300dgr SOC := ar1022 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AG300DGR IMAGE_SIZE := 15424k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x30a -p 0x47 -t 2 DEVICE_PACKAGES := kmod-usb2 endef TARGET_DEVICES += iodata_wn-ag300dgr define Device/jjplus_ja76pf2 SOC := ar7161 DEVICE_VENDOR := jjPlus DEVICE_MODEL := JA76PF2 DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-mini -uboot-envtools fconfig IMAGES := kernel.bin rootfs.bin IMAGE/kernel.bin := append-kernel IMAGE/rootfs.bin := append-rootfs | pad-rootfs KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb IMAGE_SIZE := 16000k SUPPORTED_DEVICES += ja76pf2 endef TARGET_DEVICES += jjplus_ja76pf2 define Device/librerouter_librerouter-v1 SOC := qca9558 DEVICE_VENDOR := Librerouter DEVICE_MODEL := LibreRouter DEVICE_VARIANT := v1 IMAGE_SIZE := 7936k DEVICE_PACKAGES := kmod-usb2 endef TARGET_DEVICES += librerouter_librerouter-v1 define Device/nec_wg1200cr SOC := qca9563 DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG1200CR IMAGE_SIZE := 7616k SEAMA_MTDBLOCK := 6 SEAMA_SIGNATURE := wrgac72_necpf.2016gui_wg1200cr IMAGES += factory.bin IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := $$(IMAGE/default) | seama | pad-rootfs | \ append-metadata | check-size IMAGE/factory.bin := $$(IMAGE/default) | pad-rootfs -x 64 | seama | \ seama-seal | nec-enc 9gsiy9nzep452pad | check-size DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += nec_wg1200cr define Device/nec_wg800hp SOC := qca9563 DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG800HP IMAGE_SIZE := 7104k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ xor-image -p 6A57190601121E4C004C1E1201061957 -x | nec-fw LASER_ATERM DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct-htt endef TARGET_DEVICES += nec_wg800hp define Device/netgear_ex6400_ex7300 SOC := qca9558 NETGEAR_KERNEL_MAGIC := 0x27051956 NETGEAR_BOARD_ID := EX7300series NETGEAR_HW_ID := 29765104+16+0+128 IMAGE_SIZE := 15552k IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \ netgear-rootfs | pad-rootfs DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct $(Device/netgear_ath79) endef define Device/netgear_ex6400 $(Device/netgear_ex6400_ex7300) DEVICE_MODEL := EX6400 endef TARGET_DEVICES += netgear_ex6400 define Device/netgear_ex7300 $(Device/netgear_ex6400_ex7300) DEVICE_MODEL := EX7300 endef TARGET_DEVICES += netgear_ex7300 define Device/netgear_wndr3x00 SOC := ar7161 IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \ append-rootfs | pad-rootfs DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport \ kmod-leds-reset kmod-owl-loader $(Device/netgear_ath79) endef define Device/netgear_wndr3700 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3700 DEVICE_VARIANT := v1 NETGEAR_KERNEL_MAGIC := 0x33373030 NETGEAR_BOARD_ID := WNDR3700 IMAGE_SIZE := 7680k IMAGES += factory-NA.img IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \ check-size SUPPORTED_DEVICES += wndr3700 endef TARGET_DEVICES += netgear_wndr3700 define Device/netgear_wndr3700-v2 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3700 DEVICE_VARIANT := v2 NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_BOARD_ID := WNDR3700v2 NETGEAR_HW_ID := 29763654+16+64 IMAGE_SIZE := 15872k SUPPORTED_DEVICES += wndr3700 netgear,wndr3700v2 endef TARGET_DEVICES += netgear_wndr3700-v2 define Device/netgear_wndr3800 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3800 NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_BOARD_ID := WNDR3800 NETGEAR_HW_ID := 29763654+16+128 IMAGE_SIZE := 15872k SUPPORTED_DEVICES += wndr3700 endef TARGET_DEVICES += netgear_wndr3800 define Device/netgear_wndr3800ch $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3800CH NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_BOARD_ID := WNDR3800CH NETGEAR_HW_ID := 29763654+16+128 IMAGE_SIZE := 15872k SUPPORTED_DEVICES += wndr3700 endef TARGET_DEVICES += netgear_wndr3800ch define Device/netgear_wnr2200_common SOC := ar7241 DEVICE_MODEL := WNR2200 DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport NETGEAR_KERNEL_MAGIC := 0x32323030 NETGEAR_BOARD_ID := wnr2200 IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | \ append-rootfs | pad-rootfs $(Device/netgear_ath79) endef define Device/netgear_wnr2200-8m $(Device/netgear_wnr2200_common) DEVICE_VARIANT := 8M NETGEAR_HW_ID := 29763600+08+64 IMAGE_SIZE := 7808k IMAGES += factory-NA.img IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | \ check-size SUPPORTED_DEVICES += wnr2200 endef TARGET_DEVICES += netgear_wnr2200-8m define Device/netgear_wnr2200-16m $(Device/netgear_wnr2200_common) DEVICE_VARIANT := 16M DEVICE_ALT0_VENDOR := NETGEAR DEVICE_ALT0_MODEL := WNR2200 DEVICE_ALT0_VARIANT := CN/RU NETGEAR_HW_ID := IMAGE_SIZE := 16000k endef TARGET_DEVICES += netgear_wnr2200-16m define Device/ocedo_koala SOC := qca9558 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Koala DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct SUPPORTED_DEVICES += koala IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size endef TARGET_DEVICES += ocedo_koala define Device/ocedo_raccoon SOC := ar9344 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Raccoon IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size endef TARGET_DEVICES += ocedo_raccoon define Device/ocedo_ursus SOC := qca9558 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Ursus DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size endef TARGET_DEVICES += ocedo_ursus define Device/openmesh_om5p-ac-v2 SOC := qca9558 DEVICE_VENDOR := OpenMesh DEVICE_MODEL := OM5P-AC DEVICE_VARIANT := v2 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog IMAGE_SIZE := 7808k SUPPORTED_DEVICES += om5p-acv2 endef TARGET_DEVICES += openmesh_om5p-ac-v2 define Device/pcs_cap324 SOC := ar9344 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CAP324 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += cap324 endef TARGET_DEVICES += pcs_cap324 define Device/pcs_cr3000 SOC := ar9341 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CR3000 IMAGE_SIZE := 7808k SUPPORTED_DEVICES += cr3000 endef TARGET_DEVICES += pcs_cr3000 define Device/pcs_cr5000 SOC := ar9344 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CR5000 DEVICE_PACKAGES := kmod-usb2 IMAGE_SIZE := 7808k SUPPORTED_DEVICES += cr5000 endef TARGET_DEVICES += pcs_cr5000 define Device/phicomm_k2t SOC := qca9563 DEVICE_VENDOR := Phicomm DEVICE_MODEL := K2T IMAGE_SIZE := 15744k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata | check-size DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9888-ct endef TARGET_DEVICES += phicomm_k2t define Device/pisen_ts-d084 $(Device/tplink-8mlzma) SOC := ar9331 DEVICE_VENDOR := PISEN DEVICE_MODEL := TS-D084 DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 TPLINK_HWID := 0x07030101 endef TARGET_DEVICES += pisen_ts-d084 define Device/pisen_wmb001n SOC := ar9341 DEVICE_VENDOR := PISEN DEVICE_MODEL := WMB001N IMAGE_SIZE := 14080k DEVICE_PACKAGES := kmod-i2c-gpio kmod-usb2 LOADER_TYPE := bin LOADER_FLASH_OFFS := 0x20000 COMPILE := loader-$(1).bin loader-$(1).uImage COMPILE/loader-$(1).bin := loader-okli-compile COMPILE/loader-$(1).uImage := append-loader-okli $(1) | pad-to 64k | lzma | \ uImage lzma KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 IMAGES += factory.bin IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pisen_wmb001n-factory $(1) endef TARGET_DEVICES += pisen_wmb001n define Device/pisen_wmm003n $(Device/tplink-8mlzma) SOC := ar9331 DEVICE_VENDOR := PISEN DEVICE_MODEL := Cloud Easy Power (WMM003N) DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 TPLINK_HWID := 0x07030101 endef TARGET_DEVICES += pisen_wmm003n define Device/qihoo_c301 $(Device/seama) SOC := ar9344 DEVICE_VENDOR := Qihoo DEVICE_MODEL := C301 DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \ uboot-envtools IMAGE_SIZE := 15744k SEAMA_SIGNATURE := wrgac26_qihoo360_360rg SUPPORTED_DEVICES += qihoo-c301 endef TARGET_DEVICES += qihoo_c301 define Device/rosinson_wr818 SOC := qca9563 DEVICE_VENDOR := Rosinson DEVICE_MODEL := WR818 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += rosinson_wr818 define Device/siemens_ws-ap3610 SOC := ar7161 DEVICE_VENDOR := Siemens DEVICE_MODEL := WS-AP3610 IMAGE_SIZE := 14336k BLOCKSIZE := 256k LOADER_TYPE := bin LOADER_FLASH_OFFS := 0x82000 COMPILE := loader-$(1).bin COMPILE/loader-$(1).bin := loader-okli-compile KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 8128 | uImage none KERNEL_INITRAMFS := kernel-bin | append-dtb | uImage none endef TARGET_DEVICES += siemens_ws-ap3610 define Device/sitecom_wlr-7100 SOC := ar1022 DEVICE_VENDOR := Sitecom DEVICE_MODEL := WLR-7100 DEVICE_VARIANT := v1 002 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct-smallbuffers kmod-usb2 IMAGES += factory.dlf IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x222 -p 0x53 -t 2 IMAGE_SIZE := 7488k endef TARGET_DEVICES += sitecom_wlr-7100 define Device/sitecom_wlr-8100 SOC := qca9558 DEVICE_VENDOR := Sitecom DEVICE_MODEL := WLR-8100 DEVICE_ALT0_VENDOR := Sitecom DEVICE_ALT0_MODEL := X8 AC1750 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 kmod-usb3 SUPPORTED_DEVICES += wlr8100 IMAGES += factory.dlf IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size | \ senao-header -r 0x222 -p 0x56 -t 2 IMAGE_SIZE := 15424k endef TARGET_DEVICES += sitecom_wlr-8100 define Device/teltonika_rut955 SOC := ar9344 DEVICE_VENDOR := Teltonika DEVICE_MODEL := RUT955 DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-net-qmi-wwan \ kmod-usb-serial-option kmod-hwmon-mcp3021 uqmi -uboot-envtools IMAGE_SIZE := 15552k TPLINK_HWID := 0x35000001 TPLINK_HWREV := 0x1 TPLINK_HEADER_VERSION := 1 KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\ pad-rootfs | teltonika-fw-fake-checksum | append-string master |\ append-md5sum-bin | check-size IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ append-rootfs | pad-rootfs | append-metadata |\ check-size endef TARGET_DEVICES += teltonika_rut955 define Device/trendnet_tew-823dru SOC := qca9558 DEVICE_VENDOR := Trendnet DEVICE_MODEL := TEW-823DRU DEVICE_VARIANT := v1.0R DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct SUPPORTED_DEVICES += tew-823dru IMAGE_SIZE := 15296k IMAGES := factory.bin sysupgrade.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \ pad-rootfs IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \ append-string 00AP135AR9558-RT-131129-00 | check-size IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | \ check-size endef TARGET_DEVICES += trendnet_tew-823dru define Device/wd_mynet-n750 $(Device/seama) SOC := ar9344 DEVICE_VENDOR := Western Digital DEVICE_MODEL := My Net N750 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb2 SEAMA_SIGNATURE := wrgnd13_wd_av SUPPORTED_DEVICES += mynet-n750 endef TARGET_DEVICES += wd_mynet-n750 define Device/wd_mynet-wifi-rangeextender SOC := ar9344 DEVICE_VENDOR := Western Digital DEVICE_MODEL := My Net Wi-Fi Range Extender DEVICE_PACKAGES := rssileds nvram -swconfig IMAGE_SIZE := 7808k ADDPATTERN_ID := mynet-rext ADDPATTERN_VERSION := 1.00.01 IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \ addpattern | append-metadata SUPPORTED_DEVICES += mynet-rext endef TARGET_DEVICES += wd_mynet-wifi-rangeextender define Device/winchannel_wb2000 SOC := ar9344 DEVICE_VENDOR := Winchannel DEVICE_MODEL := WB2000 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 \ kmod-usb-ledtrig-usbport endef TARGET_DEVICES += winchannel_wb2000 define Device/xiaomi_mi-router-4q SOC := qca9561 DEVICE_VENDOR := Xiaomi DEVICE_MODEL := Mi Router 4Q IMAGE_SIZE := 14336k endef TARGET_DEVICES += xiaomi_mi-router-4q define Device/yuncore_a770 SOC := qca9531 DEVICE_VENDOR := YunCore DEVICE_MODEL := A770 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k IMAGES += tftp.bin IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m endef TARGET_DEVICES += yuncore_a770 define Device/yuncore_a782 SOC := qca9563 DEVICE_VENDOR := YunCore DEVICE_MODEL := A782 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct IMAGE_SIZE := 16000k IMAGES += tftp.bin IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m endef TARGET_DEVICES += yuncore_a782 define Device/yuncore_xd4200 SOC := qca9563 DEVICE_VENDOR := YunCore DEVICE_MODEL := XD4200 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct IMAGE_SIZE := 16000k IMAGES += tftp.bin IMAGE/tftp.bin := $$(IMAGE/sysupgrade.bin) | yuncore-tftp-header-16m endef TARGET_DEVICES += yuncore_xd4200 define Device/zbtlink_zbt-wd323 SOC := ar9344 DEVICE_VENDOR := ZBT DEVICE_MODEL := WD323 IMAGE_SIZE := 16000k DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio kmod-rtc-pcf8563 \ kmod-usb-serial kmod-usb-serial-cp210x uqmi endef TARGET_DEVICES += zbtlink_zbt-wd323