include ./common-netgear.mk # for netgear-uImage # attention: only zlib compression is allowed for the boot fs define Build/zyxel-buildkerneljffs rm -rf $(KDIR_TMP)/zyxelnbg6716 mkdir -p $(KDIR_TMP)/zyxelnbg6716/image/boot cp $@ $(KDIR_TMP)/zyxelnbg6716/image/boot/vmlinux.lzma.uImage $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \ -o $@ \ -d $(KDIR_TMP)/zyxelnbg6716/image rm -rf $(KDIR_TMP)/zyxelnbg6716 endef define Build/zyxel-factory let \ maxsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \ let size="$$(stat -c%s $@)"; \ if [ $$size -lt $$maxsize ]; then \ $(STAGING_DIR_HOST)/bin/mkrasimage \ -b $(RAS_BOARD) \ -v $(RAS_VERSION) \ -r $@ \ -s $$maxsize \ -o $@.new \ -l 131072 \ && mv $@.new $@ ; \ fi endef define Device/aerohive_hiveap-121 ATH_SOC := ar9344 DEVICE_VENDOR := Aerohive DEVICE_MODEL := HiveAP 121 DEVICE_PACKAGES := kmod-usb2 BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 116m KERNEL_SIZE := 5120k UBINIZE_OPTS := -E 5 SUPPORTED_DEVICES += hiveap-121 IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += aerohive_hiveap-121 define Device/glinet_gl-ar300m-nand ATH_SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR300M DEVICE_VARIANT := NAND DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport KERNEL_SIZE := 2048k BLOCKSIZE := 128k PAGESIZE := 2048 VID_HDR_OFFSET := 512 IMAGES += factory.ubi IMAGE/sysupgrade.bin := sysupgrade-tar IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi endef TARGET_DEVICES += glinet_gl-ar300m-nand # fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff) define Device/netgear_ath79_nand DEVICE_VENDOR := NETGEAR DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport KERNEL_SIZE := 2048k BLOCKSIZE := 128k PAGESIZE := 2048 IMAGE_SIZE := 25600k KERNEL := kernel-bin | append-dtb | lzma -d20 | \ pad-offset $$(KERNEL_SIZE) 129 | \ netgear-uImage lzma | append-string -e '\xff' | \ append-uImage-fakehdr filesystem $$(NETGEAR_KERNEL_MAGIC) KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma IMAGES := sysupgrade.bin factory.img IMAGE/factory.img := append-kernel | append-ubi | netgear-dni | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata | check-size $$$$(IMAGE_SIZE) UBINIZE_OPTS := -E 5 endef define Device/netgear_wndr4300 ATH_SOC := ar9344 DEVICE_MODEL := WNDR4300 NETGEAR_KERNEL_MAGIC := 0x33373033 NETGEAR_BOARD_ID := WNDR4300 NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3 SUPPORTED_DEVICES += wndr4300 $(Device/netgear_ath79_nand) endef TARGET_DEVICES += netgear_wndr4300 define Device/zyxel_nbg6716 ATH_SOC := qca9558 DEVICE_VENDOR := ZyXEL DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct RAS_BOARD := NBG6716 RAS_ROOTFS_SIZE := 29696k RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)" KERNEL_SIZE := 4096k BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL := kernel-bin | append-dtb | uImage none | \ zyxel-buildkerneljffs | check-size 4096k IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$${BLOCKSIZE} | sysupgrade-tar rootfs=$$$$@ | append-metadata IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | zyxel-factory UBINIZE_OPTS := -E 5 endef TARGET_DEVICES += zyxel_nbg6716 DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION