doc: Remove duplicated documentation directory

[project/bcm63xx/u-boot.git] / Documentation / devicetree / bindings / board / gdsys,board_gazerbeam.txt

diff --git a/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt b/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt
deleted file mode 100644 (file)
index 28c1080..0000000
--- a/Documentation/devicetree/bindings/board/gdsys,board_gazerbeam.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-gdsys Gazerbeam board driver
-
-This driver provides capabilities to access the gdsys Gazerbeam board's device
-information. Furthermore, phandles to some internal devices are provided for
-the board files.
-
-Required properties:
-- compatible:  should be "gdsys,board_gazerbeam"
-- csb:         phandle to the board's coherent system bus (CSB) device node
-- rxaui[0-3]:  phandles to the rxaui control device nodes
-- fpga[0-1]:   phandles to the board's gdsys FPGA device nodes
-- ioep[0-1]:   phandles to the board's IO endpoint device nodes
-- ver-gpios:   GPIO list to read the hardware version from
-- var-gpios:   GPIO list to read the hardware variant information from
-- reset-gpios: GPIO list for the board's reset GPIOs
-
-Example:
-
-
-board {
-       compatible = "gdsys,board_gazerbeam";
-       csb = <&board_soc>;
-       serdes = <&SERDES>;
-       rxaui0 = <&RXAUI0>;
-       rxaui1 = <&RXAUI1>;
-       rxaui2 = <&RXAUI2>;
-       rxaui3 = <&RXAUI3>;
-       fpga0 = <&FPGA0>;
-       fpga1 = <&FPGA1>;
-       ioep0 = <&IOEP0>;
-       ioep1 = <&IOEP1>;
-
-       ver-gpios = <&PPCPCA 12 0
-                    &PPCPCA 13 0
-                    &PPCPCA 14 0
-                    &PPCPCA 15 0>;
-
-       /* MC2/SC-Board */
-       var-gpios-mc2 = <&GPIO_VB0 0 0    /* VAR-MC_SC */
-                        &GPIO_VB0 11 0>; /* VAR-CON */
-       /* MC4-Board */
-       var-gpios-mc4 = <&GPIO_VB1 0 0    /* VAR-MC_SC */
-                        &GPIO_VB1 11 0>; /* VAR-CON */
-
-       reset-gpios = <&gpio0 1 0 &gpio0 2 1>;
-};