+++ /dev/null
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2014 OpenWrt.org
-
-START=94
-STOP=15
-
-SERVICE_USE_PID=1
-
-upnpd_get_port_range() {
- local _var="$1"; shift
- local _val
-
- config_get _val "$@"
-
- case "$_val" in
- [0-9]*[:-][0-9]*)
- export -n -- "${_var}_start=${_val%%[:-]*}"
- export -n -- "${_var}_end=${_val##*[:-]}"
- ;;
- [0-9]*)
- export -n -- "${_var}_start=$_val"
- export -n -- "${_var}_end="
- ;;
- esac
-}
-
-conf_rule_add() {
- local cfg="$1"
- local tmpconf="$2"
- local action external_port_start external_port_end int_addr
- local internal_port_start internal_port_end
-
- config_get action "$cfg" action "deny" # allow or deny
- upnpd_get_port_range "ext" "$cfg" ext_ports "0-65535" # external ports: x, x-y, x:y
- config_get int_addr "$cfg" int_addr "0.0.0.0/0" # ip or network and subnet mask (internal)
- upnpd_get_port_range "int" "$cfg" int_ports "0-65535" # internal ports: x, x-y, x:y or range
-
- # Make a single IP IP/32 so that miniupnpd.conf can use it.
- case "$int_addr" in
- */*) ;;
- *) int_addr="$int_addr/32" ;;
- esac
-
- echo "${action} ${ext_start}${ext_end:+-}${ext_end} ${int_addr} ${int_start}${int_end:+-}${int_end}" >>$tmpconf
-}
-
-upnpd_write_bool() {
- local opt="$1"
- local def="${2:-0}"
- local alt="$3"
- local val
-
- config_get_bool val config "$opt" "$def"
- if [ "$val" -eq 0 ]; then
- echo "${alt:-$opt}=no" >> $tmpconf
- else
- echo "${alt:-$opt}=yes" >> $tmpconf
- fi
-}
-
-boot() {
- return
-}
-
-start() {
- config_load "upnpd"
- local extiface intiface upload download logging secure enabled natpmp
- local extip port usesysuptime conffile serial_number model_number
- local uuid notify_interval presentation_url enable_upnp
- local upnp_lease_file clean_ruleset_threshold clean_ruleset_interval
- local ipv6_listening_ip enabled
-
- config_get_bool enabled config enabled 1
-
- [ "$enabled" -gt 0 ] || return 1
-
- config_get extiface config external_iface
- config_get extzone config external_zone
- config_get intiface config internal_iface
- config_get extip config external_ip
- config_get port config port 5000
- config_get upload config upload
- config_get download config download
- config_get_bool logging config log_output 0
- config_get conffile config config_file
- config_get serial_number config serial_number
- config_get model_number config model_number
- config_get uuid config uuid
- config_get notify_interval config notify_interval
- config_get presentation_url config presentation_url
- config_get upnp_lease_file config upnp_lease_file
- config_get clean_ruleset_threshold config clean_ruleset_threshold
- config_get clean_ruleset_interval config clean_ruleset_interval
- config_get ipv6_listening_ip config ipv6_listening_ip
-
- local args
-
- . /lib/functions/network.sh
-
- local ifname
-
- # manual external interface overrides everything
- if [ -z "$extiface" ] ; then
- # manual external zone (if dynamically find interfaces
- # belonging to it) overrides network_find_wan*
- if [ -n "$extzone" ] ; then
- ifname=$(fw3 -q zone $extzone | head -1)
- fi
- [ -n "$extiface" ] || network_find_wan extiface
- [ -n "$extiface" ] || network_find_wan6 extiface
- fi
-
- [ -n "$ifname" ] || network_get_device ifname ${extiface}
-
- if [ -n "$conffile" ]; then
- args="-f $conffile"
- else
- local tmpconf="/var/etc/miniupnpd.conf"
- args="-f $tmpconf"
- mkdir -p /var/etc
-
- echo "ext_ifname=$ifname" >$tmpconf
-
- [ -n "$extip" ] && \
- echo "ext_ip=$extip" >>$tmpconf
-
- local iface
- for iface in ${intiface:-lan}; do
- local device
- network_get_device device "$iface" && {
- echo "listening_ip=$device" >>$tmpconf
- }
- done
-
- [ "$port" != "auto" ] && \
- echo "port=$port" >>$tmpconf
-
- config_load "upnpd"
- upnpd_write_bool enable_natpmp 1
- upnpd_write_bool enable_upnp 1
- upnpd_write_bool secure_mode 1
- upnpd_write_bool pcp_allow_thirdparty 0
- upnpd_write_bool system_uptime 1
-
- [ -n "$upnp_lease_file" ] && \
- echo "lease_file=$upnp_lease_file" >>$tmpconf
-
- [ -n "$upload" -a -n "$download" ] && {
- echo "bitrate_down=$(($download * 1024 * 8))" >>$tmpconf
- echo "bitrate_up=$(($upload * 1024 * 8))" >>$tmpconf
- }
-
- [ -n "${presentation_url}" ] && \
- echo "presentation_url=${presentation_url}" >>$tmpconf
-
- [ -n "${notify_interval}" ] && \
- echo "notify_interval=${notify_interval}" >>$tmpconf
-
- [ -n "${clean_ruleset_threshold}" ] && \
- echo "clean_ruleset_threshold=${clean_ruleset_threshold}" >>$tmpconf
-
- [ -n "${clean_ruleset_interval}" ] && \
- echo "clean_ruleset_interval=${clean_ruleset_interval}" >>$tmpconf
-
- [ -n "${ipv6_listening_ip}" ] && \
- echo "ipv6_listening_ip=${ipv6_listening_ip}" >>$tmpconf
-
- [ -z "$uuid" ] && {
- uuid="$(cat /proc/sys/kernel/random/uuid)"
- uci set upnpd.config.uuid=$uuid
- uci commit upnpd
- }
-
- [ "$uuid" = "nocli" ] || \
- echo "uuid=$uuid" >>$tmpconf
-
- [ -n "${serial_number}" ] && \
- echo "serial=${serial_number}" >>$tmpconf
-
- [ -n "${model_number}" ] && \
- echo "model_number=${model_number}" >>$tmpconf
-
- config_foreach conf_rule_add perm_rule "$tmpconf"
- fi
-
-
- if [ -n "$ifname" ]; then
- # start firewall
- iptables -L MINIUPNPD >/dev/null 2>/dev/null || fw3 reload
-
- if [ "$logging" = "1" ]; then
- SERVICE_DAEMONIZE=1 \
- service_start /usr/sbin/miniupnpd $args -d
- else
- SERVICE_DAEMONIZE= \
- service_start /usr/sbin/miniupnpd $args
- fi
- else
- logger -t "upnp daemon" "external interface not found, not starting"
- fi
-}
-
-stop() {
- service_stop /usr/sbin/miniupnpd
-
- iptables -t nat -F MINIUPNPD 2>/dev/null
- iptables -t filter -F MINIUPNPD 2>/dev/null
-
- [ -x /usr/sbin/ip6tables ] && {
- ip6tables -t filter -F MINIUPNPD 2>/dev/null
- }
-}
projects / feed / routing.git / blobdiff